Inverse-collimated proton radiography for imaging thin materials.

Relativistic, magnetically focused proton radiography was invented at Los Alamos National Laboratory using the 800 MeV LANSCE beam and is inherently well-suited to imaging dense objects, at areal densities >20 g cm-2. However, if the unscattered portion of the transmitted beam is removed at the Fourier plane through inverse-collimation, this system becomes highly sensitive to very thin media, of areal densities <100 mg cm-2. Here, this inverse-collimation scheme is described in detail and demonstrated by imaging Xe gas with a shockwave generated by an aluminum plate compressing the gas at Mach 8.8. With a 5-mrad inverse collimator, an areal density change of just 49 mg cm-2 across the shock front is discernible with a contrast-to-noise ratio of 3. Geant4 modeling of idealized and realistic proton transports can guide the design of inverse-collimators optimized for specific experimental conditions and show that this technique performs better for thin targets with reduced incident proton beam emittance. This work increases the range of areal densities to which the system is sensitive to span from ∼25 mg cm-2 to 100 g cm-2, exceeding three orders of magnitude. This enables the simultaneous imaging of a dense system as well as thin jets and ejecta material that are otherwise difficult to characterize with high-energy proton radiography.

Fabrication and characterisation of 2NDPA-loaded poly(lactide-co-glycolide) (PLG) microspheres for explosive safety.

We demonstrate the microencapsulation of a double-base (DB) rocket propellant stabiliser, 2-nitrodiphenylamine (2-NDPA), that can potentially increase the shelf life of DB rocket propellants. Poly(lactide-co-glycolide) (PLG) microspheres loaded with 2-NDPA were prepared using the oil-in-water emulsion technique. The microsphere size was found to be inversely related to the mixing rate. It was also found that a higher theoretical loading of 2-NDPA resulted in larger microspheres. In addition, a Rosin Rammler distribution function gave an accurate representation of the microsphere size distribution, and the release rate 2-NDPA from PLG microspheres was found to be size dependent. We show that parameters such as the stirring speed and the percent loading of 2-NDPA can be varied to tailor the release of 2-NDPA from PLG microspheres. In addition, we have shown that temperature has a dramatic effect on the release of 2-NDPA from PLG microcapsules.

Mathematical model of Rayleigh-Taylor and Richtmyer-Meshkov instabilities for viscoelastic fluids.

We extended the Goncharov model [V. N. Goncharov, Phys. Rev. Lett. 88, 134502 (2002)] for nonlinear Rayleigh-Taylor instability of perfect fluids to the case of Rivlin-Ericksen viscoelastic fluids [R. S. Rivlin and J. L. Ericksen, Rat. Mech. Anal. 4, 323 (1955)], with surface tension. For Rayleigh-Taylor instability, viscosity, surface tension, and viscoelasticity decrease the exponential growth rate predicted by linear stability analysis. In particular, we find that viscosity and surface tension decrease the terminal bubble velocity, whereas viscoelasticity is found to have no effect. All three properties increase the saturation height of the bubble. In Richmyer-Meshkov instability, the decay of the asymptotic velocity depends on the balance between viscosity and surface tension, and viscoelasticity tends to slow the asymptotic velocity decay.

Small Atwood number Rayleigh-Taylor experiments.

Consideration is given to small Atwood number (non-dimensional density difference) experiments to investigate mixing driven by Rayleigh-Taylor (R-T) instability. The past 20 years have seen the development of novel experiments to investigate R-T mixing and, simultaneously, the advent of high-fidelity diagnostics. Indeed, the developments of experiments and diagnostics have gone hand in hand, and as a result modern R-T experiments rival the capabilities and research scope of shear-driven mixing experiments. Thus, research into the small Atwood number limit has made significant progress over the past 20 years, and has offered important insights into natural mixing processes as well as the general R-T problem. This review of small Atwood number experiments serves as an opportunity to discuss progress, and also to provoke thoughts about future high Atwood number designs and difficulties.

Development and validation of a turbulent-mix model for variable-density and compressible flows.

The modeling of buoyancy driven turbulent flows is considered in conjunction with an advanced statistical turbulence model referred to as the BHR (Besnard-Harlow-Rauenzahn) k-S-a model. The BHR k-S-a model is focused on variable-density and compressible flows such as Rayleigh-Taylor (RT), Richtmyer-Meshkov (RM), and Kelvin-Helmholtz (KH) driven mixing. The BHR k-S-a turbulence mix model has been implemented in the RAGE hydro-code, and model constants are evaluated based on analytical self-similar solutions of the model equations. The results are then compared with a large test database available from experiments and direct numerical simulations (DNS) of RT, RM, and KH driven mixing. Furthermore, we describe research to understand how the BHR k-S-a turbulence model operates over a range of moderate to high Reynolds number buoyancy driven flows, with a goal of placing the modeling of buoyancy driven turbulent flows at the same level of development as that of single phase shear flows.

Rayleigh-Taylor instability with complex acceleration history.

Experiments and numerical simulations are performed on the Rayleigh-Taylor instability with a complex acceleration history g(t) consisting of consecutive periods of acceleration, deceleration, and acceleration. The dominant bubbles and spikes that grow in the initial unstable phase are found to be shredded by the trailing structures during the stable deceleration phase. This reduces their diameter at the front and increases the atomic mixing such that the growth during the final unstable acceleration is retarded. The simulations are able to describe the bubble evolution only if broadband initial perturbations are assumed. Such a complex g(t) is useful for validating mix models.

About mean diameter and size distributions of poly(lactide-co-glycolide) (PLG) microspheres.

Despite the importance of microsphere size for controlled drug delivery, little work has been done to quantitatively predict the distribution of microspheres from manufacturing techniques. This work presents a quantitative study that describes the size distribution of poly(lactide-co-glycolide) (PLG) microspheres. A fluid mechanics based correlation for the mean microsphere diameter is formulated based on the theory of emulsification in turbulent flow under non-coalescing conditions. The correlation was constructed and validated with experimentally obtained mean microsphere diameters prepared at different stirring speeds. In addition, a Rosin Rammler distribution function was found to give an accurate representation of the microsphere distribution. The spread of the microsphere size distribution was found to decrease with stirring speed. With the validation of the mathematical correlation, it is now possible to have a good estimate of the average microsphere size prior to microsphere preparation. This is directly relevant to the pharmaceutical industry where microspheres of specified mean diameter and size distribution are desirable.