Comparison of pesticide adsorption efficiencies of zeolites and zeolite-carbon composites and their regeneration possibilities.

The presence of pesticides in our environment is a consequence of intensive industrial and civilizational development, necessitating the search for effective and safe methods to remove them. We suggest utilizing zeolite X and a zeolite-carbon composite, obtained through the chemical transformation of fly ash, as pesticide sorbents. To increase the sorption efficiency of 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxyacetic acid (MCPA), carbendazim, and simazine, we functionalized the zeolite materials with cationic (hexadecyltrimethylammonium) and nonionic (Triton X-100) surfactants. We used transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric/differential thermal analysis (TG/DTA) and point of zero charge (pHpzc) analysis to characterize the functionalized sorbent materials. Our results indicate that cationic surfactants significantly enhance the adsorption of 2,4-D and MCPA. In contrast, carbendazim and simazine exhibit maximum sorption on the unmodified zeolite-carbon composite. The sorption mechanism is intricate, with physical sorption predominating, primarily due to electrostatic interactions between the protonated binding sites of the adsorbents and the negatively charged pesticide molecules. Regeneration tests demonstrated that ethanol is the most effective in regenerating zeolite-carbon composite with adsorbed MCPA and 2,4-D, while thermal regeneration was not possible. Adsorbents with simazine and carbendazim can be regenerated using both thermal and ethanol methods, but the thermal regeneration of zeolite with adsorbed simazine is more efficient. Utilizing functionalized zeolite materials obtained from industrial waste, such as fly ash, could provide an efficient way to remove pesticides from the environment.

Removal of Pesticides from Waters by Adsorption: Comparison between Synthetic Zeolites and Mesoporous Silica Materials. A Review.

Pesticides are pollutants found in wastewater due to increasing agricultural activities over the years. Inappropriate dosing of pesticides results in the dispersal of active ingredients in the environment. The complete removal of pesticides from wastewater is an immediate concern due to their high toxicity and mobility. At present, adsorption is one of the most widely used methods for pesticide removal, in which synthetic zeolites and mesoporous silica materials are extensively applied. This article presents a systematic and comparative review of the applications and comparison of these adsorbents, based on the data reported in the literature. The paper summarizes the information collected from various studies, including the type of adsorbents and pesticides used, experimental conditions, and results of each work. The studies analyzed were laboratory-based and show potential advantages for the treatment of pesticide-bearing waters using functionalized and unfunctionalized synthetic zeolites and mesoporous silica materials. As a whole, functionalized materials are reported to exhibit better removal performance for different pesticides than conventional materials. It is expected that the results of this review will help researchers to establish a powerful strategy for the abatement of pesticides in wastewater.

Modification of Bentonite with Cationic and Nonionic Surfactants: Structural and Textural Features.

Surfactant-modified clay minerals are known for their good sorption properties of both organic and inorganic compounds from aqueous solutions. However, the current knowledge regarding the effect of both cationic and nonionic surfactants on the properties of bentonite is still insufficient. Bentonite, with montmorillonite as the base clay, was modified with hexadecethyltrimethylammonium bromide (a cationic surfactant) in the amount of 1.0 cation exchange capacity (CEC) of bentonite and varying concentrations of t-octylphenoxypolyethoxyethanol (Triton X-100, a nonionic surfactant). We aimed to improve the understanding of the effect of nonionic and cationic surfactants on clay minerals. The modified bentonites were characterized by X-ray diffraction (XRD), thermogravimetric analysis/differential thermal analysis (TG/DTA), Fourier transform infrared spectrometry (FTIR), field emission scanning electron microscopy (SEM) and specific surface area and pore volume (BET). According to our results, the presence of a cationic surfactant significantly increased the amount of the adsorbed nonionic surfactant. Moreover, an increase in the concentration of nonionic surfactants is also associated with an increase in the effectiveness of the modification process. Our results indicate that the amount of nonionic surfactant used has a significant effect on the properties of the obtained hybrid material. Modification of bentonite with a nonionic surfactant did not cause an expansion of the interlayer space of smectite, regardless of the presence of a cationic surfactant. The modification process was found to significantly decrease the specific surface area of bentonite. Improvement of hydrophobic properties and thermal stability was also observed.