RESUMO
Additive Manufacturing (AM) techniques have recently attracted the attention of scientists for the development of prototypes with complex or particular geometry in a fast and cheap way. Among the different AM processes, the Fused Deposition Modelling process (FDM) offers several advantages in terms of costs, implementation features and design freedom. Recently, it has been adopted to realise auxetic structures, which are characterised by negative Poisson ratio, enhanced mechanical properties, and a higher compression resistance than conventional structures. This review outlines the use of AM processes, in particular FDM, to design and obtain auxetic structures, with the final aim to exploit their applications in different fields. The first part of this work presents a brief classification of auxetic structures and materials. Subsequently, a summary of additive manufacturing processes is presented, focusing on the use of FDM and its limitations. Finally, the studies on the use of additive manufacturing to produce auxetic structures are shown, evidencing the potential of the concurrent combination of a fast prototyping technique such as FDM and the characteristics of polymer- and/or composite-based auxetic structures. Indeed, this new technological field opens the possibility of realising novel structures with integrated smart behaviour, multifunctional properties, compression resistance, and a tailored microstructure and shape.
RESUMO
Hydrophobic surfaces are highly desired for several applications due to their exceptional properties such as self-cleaning, anti-icing, anti-friction and others. Such surfaces can be prepared via numerous methods including plasma technology, a dry technique with low environmental impact. In this paper, the effect of a one-step sulfur hexafluoride (SF6) plasma treatment upon the low velocity impact behavior of basalt/epoxy composites has been investigated by using several characterization techniques. A capacitive coupled radiofrequency plasma system was used for the plasma surface treatment of basalt/epoxy composites, and suitable surface treatment conditions were experimentally investigated with respect to gas flow rate, chamber pressure, power intensity, and surface treatment time by measuring the water droplet contact angle of treated specimens. The contact angle measurements showed that treating with SF6 plasma would increase the hydrophobicity of basalt/epoxy composites; moreover, the impact results obtained on reinforced epoxy basalt fiber showed damage in a confined area and higher impact resistance for plasma-treated basalt systems.
RESUMO
Confinement and surface effects provided by nanoparticles have been shown to produce changes in polymer molecules affecting their macroscopic viscosity. Nanoparticles may induce rearrangements in polymer conformation with an increase in free volume significantly lowering the viscosity. This phenomenon is generally attributed to the selective adsorption of the polymer high molar mass fraction onto nanoparticles surface when the polymer radius of gyration is comparable to the nanoparticles characteristic dimensions. Carbon nanotubes seem to be the ideal candidate to induce viscosity reduction of polymer due to both their high surface-to-volume ratio and their nanometric sizes, comparable to the gyration radius of polymer chains. However, the amount of nanotube in a polymer system is limited by the percolation threshold as, above this limit, the formation of a nanotubes network hinders the viscosity reduction effect. Based on these findings, we have used multiwalled carbon nanotubes MWCNT "aggregates" as viscosity reducers. Our results reveal both that the use of nanotube clusters reduce significantly the viscosity of the final system and strongly increase the nanotube limiting concentration for viscosity hindering. By using hydroxyl and carboxyl functionalized nanotubes, this effect has been rather maximized likely due to the hydrogen bridged stabilization of nanotube aggregates.
