RESUMO
Hybrid entangled states, having entanglement between different degrees-of-freedom (DoF) of a particle pair, are of great interest for quantum information science and communication protocols. Among different DoFs, the hybrid entangled states encoded with polarization and orbital angular momentum (OAM) allow the generation of qubit-qudit entangled states, macroscopic entanglement with very high quanta of OAM and improvement in angular resolution in remote sensing. Till date, such hybrid entangled states are generated by using a high-fidelity polarization entangled states and subsequent imprinting of chosen amount of OAM using suitable mode converters such as spatial light modulator in complicated experimental schemes. Given that the entangled sources have feeble number of photons, loss of photons during imprinting of OAM using diffractive optical elements limits the use of such hybrid states for practical applications. Here we report, on a simple generic experimental scheme to generate hybrid entangled states in polarization and OAM through direct transfer of classical non-separable states of the pump beam in parametric down conversion process. As a proof of principle, using local non-separable pump states of OAM mode l = 3, we have produced quantum hybrid entangled states with entanglement witness parameter of ~1.25 ± 0.03 violating by 8 standard deviation.
RESUMO
We report on the first realization of an ultrafast Airy beam optical parametric oscillator (OPO). By introducing intracavity cubic phase modulation to the resonant Gaussian signal in a synchronously-pumped singly-resonant OPO cavity and its subsequent Fourier transformation, we have generated 2-dimensional Airy beam in the output signal across a 250 nm tuning range in the near-infrared. The generated Airy beam can be tuned continuously from 1477 to 1727 nm, providing an average power of as much as 306 mW at 1632 nm in pulses of ~23 ps duration with a spectral bandwidth of 1.7 nm.
RESUMO
We report on the generation of ultrafast vortex beams in the deep ultraviolet (DUV) wavelength range at 266 nm, for the first time to our knowledge. Using a Yb-fiber-based green source in combination with two spiral phase plates of orders 1 and 2, we were able to generate picosecond Laguerre-Gaussian (LG) beams at 532 nm. Subsequently, these LG beams were frequency doubled by single-pass, second-harmonic generation in a 10 mm-long ß-BaB2O4 crystal to generate ultrafast vortex beams at 266 nm with a vortex order as high as 12, providing up to 383 mW of DUV power at a single-pass, green-to-DUV conversion efficiency of 5.2%. The generated picosecond UV vortex beam has a spectral width of 1.02 nm with a passive power stability better than 1.2% rms over >1.5 h.
RESUMO
We report on efficient nonlinear generation of ultrafast, higher order "perfect" vortices at the green wavelength. Based on Fourier transformation of the higher order Bessel-Gauss (BG) beam generated through the combination of the spiral phase plate and axicon, we have transformed the Gaussian beam of the ultrafast Yb-fiber laser at 1060 nm into perfect vortices of power 4.4 W and order up to 6. Using single-pass second-harmonic generation (SHG) of such vortices in 5 mm long chirped MgO-doped, periodically poled congruent LiNbO3 crystal, we have generated perfect vortices at green wavelength (530 nm) with output power of 1.2 W and vortex order up to 12 at a single-pass conversion efficiency of 27%, independent of the orders. This is the highest single-pass SHG efficiency of any optical beams other than Gaussian beams. Unlike the disintegration of higher order vortices due to spatial walk-off effect in birefringent crystals, here, the use of the quasi-phase-matching process enables generation of high-quality vortices, even at higher orders. The green perfect vortices of all orders have temporal and spectral widths of 507 fs and 1.9 nm, respectively, corresponding to a time-bandwidth product of 1.02.
RESUMO
The "perfect" vortex is a new class of optical vortex beam having ring radius independent of its topological charge (order). One of the simplest techniques to generate such beams is the Fourier transformation of the Bessel-Gauss beams. The variation in ring radius of such vortices require Fourier lenses of different focal lengths and or complicated imaging setup. Here we report a novel experimental scheme to generate perfect vortex of any ring radius using a convex lens and an axicon. As a proof of principle, using a lens of focal length f = 200 mm, we have varied the radius of the vortex beam across 0.3-1.18 mm simply by adjusting the separation between the lens and axicon. This is also a simple scheme to measure the apex angle of an axicon with ease. Using such vortices we have studied non-collinear interaction of photons having orbital angular momentum (OAM) in spontaneous parametric down-conversion (SPDC) process and observed that the angular spectrum of the SPDC photons are independent of OAM of the pump photons rather depends on spatial profile of the pump beam. In the presence of spatial walk-off effect in nonlinear crystals, the SPDC photons have asymmetric angular spectrum with reducing asymmetry at increasing vortex radius.
RESUMO
We report on the development of a high-power, high-repetition-rate, fiber laser based source of ultrafast ultraviolet (UV) radiation. Using single-pass second-harmonic generation and subsequent sum-frequency generation (SFG) of an ultrafast ytterbium fiber at 1064 nm in 1.2 and 5 mm long bismuth triborate (BIBO) crystals, respectively, we have generated UV output power as high as 1.06 W at 355 nm with single-pass near-infrared-to-UV conversion efficiency of â¼22%. The source has output pulses of temporal and spectral widths of â¼576 fs and 1.6 nm, respectively, at 78 MHz repetition rate. For given crystals and laser parameters, we have experimentally verified that the optimum conversion efficiency of the SFG process requires interacting pump beams to have the same confocal parameters. We also present a systematic study on the power ratio of pump beams influencing the overall conversion of the UV radiation. The UV source has a peak-to-peak short-term power fluctuation of <2.2%, with a power drift of 0.76%/h associated to different loss mechanisms of the BIBO crystal at UV wavelengths. At tight focusing, the BIBO crystal has a broad angular acceptance bandwidth of (â¼2 mrad·cm) for SFG of the femtosecond laser.
RESUMO
We report the development of a compact, high-power, continuous-wave, single-frequency, ultraviolet (UV) source with extended wavelength tunability. The device is based on single-pass, intracavity, second-harmonic-generation (SHG) of the signal radiation of a singly resonant optical parametric oscillator (SRO) working in the visible and near-IR wavelength range. The SRO is pumped in the green with a 25-mm-long, multigrating, MgO doped periodically poled stoichiometric lithium tantalate (MgO:sPPLT) as nonlinear crystal. Using three grating periods, 8.5, 9.0, and 9.5 µm of the MgO:sPPLT crystal and a single set of cavity mirrors, the SRO can be tuned continuously across 710.7-836.3 nm in the signal and corresponding idler across 2115.8-1462.1 nm with maximum idler power of 1.9 W and maximum out-coupled signal power of 254 mW. By frequency-doubling the intracavity signal with a 5-mm-long bismuth borate (BIBO) crystal, we can further tune the SRO continuously over 62.8 nm across 355.4-418.2 nm in the UV with maximum single-frequency UV power, as much as 770 mW at 398.28 nm in a Gaussian beam profile. The UV radiation has an instantaneous line-width of â¼14.5 MHz and peak-peak frequency stability of 151 MHz over 100 s. More than 95% of the tuning range provides UV power >260 mW. Access to lower UV wavelengths can in principle be realized by operating the SRO in the visible using shorter grating periods.