Hyaluronate loaded advanced wound dressing in form of in situ forming hydrogel powders: Formulation, characterization, and therapeutic potential.

In this paper, a blend composed of alginate-pectin-chitosan loaded with sodium hyaluronate in the form of an in situ forming dressing was successfully developed for wound repair applications. This complex polymeric blend has been efficiently used to encapsulate hyaluronate, forming an adhesive, flexible, and non-occlusive hydrogel able to uptake to 15 times its weight in wound fluid, and being removed without trauma from the wound site. Calorimetric and FT-IR studies confirmed chemical interactions between hyaluronate and polysaccharides blend, primarily related to the formation of a polyelectrolytic complex between hyaluronate and chitosan. In vivo wound healing assays on murine models highlighted the ability of the loaded hydrogels to significantly accelerate wound healing compared to a hyaluronic-loaded ointment. This was evident through complete wound closure in <10 days, accompanied by fully restored epidermal functionality and no indications of the site of excision or treatment. Therefore, all these results suggest that hyaluronate-loaded powders could be a very promising conformable dressing in several wound healing applications where exudate is present.

Dietary Inflammatory Index of Obese Individuals with Obstructive Sleep Apnea: A Descriptive Study.

The objective of the present study was to describe the dietary inflammatory profile and its correlations with sleep parameters of obese individuals with obstructive sleep apnea (OSA). Forty individuals underwent nocturnal polysomnography, anthropometric measurements, body composition by plethysmography, assessment of food consumption by three-day food records, and blood collection for the lipid, glycemic and hormonal profile. Food consumption data were evaluated semiquantitatively, quantitalively assessment, and calculation of the dietary inflammatory index (DII) was perfomed. The results demonstrated a predominantly proinflammatory dietary profile. The participants showed a low intake of fruit and vegetables. Additionally, a low consumption of fiber, magnesium, vitamin D, and vitamin E was observed, although there was an adequate distribution of macronutrients. In conclusion, although the inflammatory profile did not correlate with OSA, the study showed a directly proportional relationship between adequate dietary patterns and better sleep quality.

A Green Bioactive By-Product Almond Skin Functional Extract for Developing Nutraceutical Formulations with Potential Antimetabolic Activity.

(1) Background: almond peels are rich in polyphenols such as catechin and epicatechin, which are important anti-free-radical agents, anti-inflammatory compounds, and capable of breaking down cholesterol plaques. This work aims to evaluate the biological and technological activity of a "green" dry aqueous extract from Sicilian almond peels, a waste product of the food industry, and to develop healthy nutraceuticals with natural ingredients. Eudraguard® Natural is a natural coating polymer chosen to develop atomized formulations that improve the technological properties of the extract. (2) Methods: the antioxidant and free radical scavenger activity of the extract was rated using different methods (DPPH assay, ABTS, ORAC, NO). The metalloproteinases of the extracts (MMP-2 and MMP-9), the enhanced inhibition of the final glycation products, and the effects of the compounds on cell viability were also tested. All pure materials and formulations were characterized using UV, HPLC, FTIR, DSC, and SEM methods. (3) Results: almond peel extract showed appreciable antioxidant and free radical activity with a stronger NO inhibition effect, strong activity on MMP-2, and good antiglycative effects. In light of this, a food supplement with added health value was formulated. Eudraguard® Natural acted as a swelling substrate by improving extract solubility and dissolution/release (4) Conclusions: almond peel extract has significant antioxidant activity and MMP/AGE inhibition effects, resulting in an optimal candidate to formulate safe microsystems with potential antimetabolic activity. Eudraguard® Natural is capable of obtaining spray-dried microsystems with an improvement in the extract's biological and technological characteristics. It also protects the dry extract from degradation and oxidation, prolonging the shelf life of the final product.

Phytochemical analysis, antioxidant and hypoglycemic activities of a methanol extract from Stachys brachyclada de Noé ex Coss. leaves.

Stachys brachyclada de Noé ex Coss. (Lamiaceae) is a quite rare medicinal plant endemic to the Mediterranean basin. In this study, seven secondary metabolites from a methanol extract of its leaves have been isolated and identified by a combination of chromatographic and spectroscopic methods (1D and 2D NMR experiments and ESIMS analysis). They include one ethyl 4-hydroxybenzoate (1), three acylated flavone glycosides (2-4), one diapigenin derivative (5) and two flavone aglycones (6-7). Stachysetin (5) was found the major compound of the extract (74.0 mg/g of dry matter). Moreover, the produced extract showed the ability in inhibiting the α-glucosidase enzyme (IC50 = 13.7 µg/mL), in quenching the radical 1,1-diphenyl-2-picrylhydrazyl (EC50 = 74.6 µg/mL), and in reducing the intracellular oxidative stress level in Human Dermal Fibroblast (64% inhibition at 50 µg/mL).

3D printed macroporous scaffolds of PCL and inulin-g-P(D,L)LA for bone tissue engineering applications.

Bone repair and tissue-engineering (BTE) approaches require novel biomaterials to produce scaffolds with required structural and biological characteristics and enhanced performances with respect to those currently available. In this study, PCL/INU-PLA hybrid biomaterial was prepared by blending of the aliphatic polyester poly(ε-caprolactone) (PCL) with the amphiphilic graft copolymer Inulin-g-poly(D,L)lactide (INU-PLA) synthetized from biodegradable inulin (INU) and poly(lactic acid) (PLA). The hybrid material was suitable to be processed using fused filament fabrication 3D printing (FFF-3DP) technique rendering macroporous scaffolds. PCL and INU-PLA were firstly blended as thin films through solvent-casting method, and then extruded by hot melt extrusion (HME) in form of filaments processable by FFF-3DP. The physicochemical characterization of the hybrid new material showed high homogeneity, improved surface wettability/hydrophilicity as compared to PCL alone, and right thermal properties for FFF process. The 3D printed scaffolds exhibited dimensional and structural parameters very close to those of the digital model, and mechanical performances compatible with the human trabecular bone. In addition, in comparison to PCL, hybrid scaffolds showed an enhancement of surface properties, swelling ability, and in vitro biodegradation rate. In vitro biocompatibility screening through hemolysis assay, LDH cytotoxicity test on human fibroblasts, CCK-8 cell viability, and osteogenic activity (ALP evaluation) assays on human mesenchymal stem cells showed favorable results.

Hollow Particles Obtained by Prilling and Supercritical Drying as a Potential Conformable Dressing for Chronic Wounds.

The production of aerogels for different applications has been widely known, but the use of polysaccharide-based aerogels for pharmaceutical applications, specifically as drug carriers for wound healing, is being recently explored. The main focus of this work is the production and characterization of drug-loaded aerogel capsules through prilling in tandem with supercritical extraction. In particular, drug-loaded particles were produced by a recently developed inverse gelation method through prilling in a coaxial configuration. Particles were loaded with ketoprofen lysinate, which was used as a model drug. The core-shell particles manufactured by prilling were subjected to a supercritical drying process with CO2 that led to capsules formed by a wide hollow cavity and a tunable thin aerogel layer (40 µm) made of alginate, which presented good textural properties in terms of porosity (89.9% and 95.3%) and a surface area up to 417.0 m2/g. Such properties allowed the hollow aerogel particles to absorb a high amount of wound fluid moving very quickly (less than 30 s) into a conformable hydrogel in the wound cavity, prolonging drug release (till 72 h) due to the in situ formed hydrogel that acted as a barrier to drug diffusion.

Couroupita guianensis bark decoction: From Amazonian medicine to the UHPLC-HRMS chemical profile and its role in inflammation processes and re-epithelialization.

ETHNOPHARMACOLOGICAL RELEVANCE: In the Amazon rainforest, the shamans of the Mayantuyacu site use the healing virtues of decoctions and teas from different parts of the Couroupita guianensis Aubl. (Lecythidaceae) trees as remedies in Ashaninka medicine. However, composition of the remedy and the underlying mechanism remain unclear. AIM OF THE STUDY: This study was designed to compare the metabolite profile of Couroupita guianensis bark decoction produced by Amazonian shamans with that obtained under standardised laboratory conditions and to investigate biological properties of both decoction and isolated constituents in skin wound healing process and inflammation. MATERIALS AND METHODS: The chemical analyses were carried out by Ultra-High-Performance Liquid Chromatography coupled with UV and High-Resolution Mass Spectrometry detectors (UHPLC-UV-HRMS). 1D and 2D-NMR experiments were performed to identify the main decoction constituents. The decoction and pure compound effect on keratinocyte migration was determined by the in vitro wound healing model; the mechanism of action was elucidated by western blot analysis. RESULTS: UHPLC-UV-HRMS analysis revealed the occurrence of polyphenolic compounds as catechins, ellagitannins and, notably, of unusual sulphated derivatives of ellagic acid isolated for the first time from Couroupita guianensis bark. A new natural sulphated molecule [4-(2″-O-sulphate- ß-D-glucuronopyranosyl) ellagic acid] was identified as the potential active compound responsible for the efficacy of bark decoction stimulating wound healing in human HaCaT keratinocytes. The molecular mechanism involved the induction of pro-migratory pathways mediated by ERK and AKT phosphorylation and the increase of MMP2 expression in HaCaT cells. At the same time, the treatment inhibited inflammation interfering with NFkB activation. CONCLUSION: Beyond identifying a new bioactive compound, the overall results scientifically validate the traditional use of Couroupita guianensis bark decoction as an anti-inflammatory remedy. Moreover, the beneficial effects on keratinocytes suggest promising therapeutic applications in skin diseases.

Flogomicina: A Natural Antioxidant Mixture as an Alternative Strategy to Reduce Biofilm Formation.

The National Institute of Health has reported that approximately 80% of chronic infections are associated with biofilms, which are indicated as one of the main reasons for bacteria's resistance to antimicrobial agents. Several studies have revealed the role of N-acetylcysteine (NAC), in reducing biofilm formation induced by different microorganisms. A novel mixture made up of NAC and different natural ingredients (bromelain, ascorbic acid, Ribes nigrum, resveratrol, and pelargonium) has been developed in order to obtain a pool of antioxidants as an alternative strategy for biofilm reduction. The study has demonstrated that the mixture is able to significantly enhance NAC activity against different Gram-positive and Gram-negative bacteria. It has shown an increase in NAC permeation in vitro through an artificial fluid, moving from 2.5 to 8 µg/cm2 after 30 min and from 4.4 to 21.6 µg/cm2 after 180 min, and exhibiting a strongly fibrinolytic activity compared to the single components of the mixture. Moreover, this novel mixture has exhibited an antibiofilm activity against S aureus and the ability to reduce S. aureus growth by more than 20% in a time-killing assay, while on E. coli, and P. mirabilis, the growth was reduced by more than 80% compared to NAC. The flogomicina mixture has also been proven capable of reducing bacterial adhesion to abiotic surfaces of E.coli, by more than 11% concerning only the NAC. In combination with amoxicillin, it has been shown to significantly increase the drug's effectiveness after 14 days, offering a safe and natural way to reduce the daily dosage of antibiotics in prolonged therapies and consequently, reduce antibiotic resistance.

Eudraguard® Natural and Protect: New "Food Grade" Matrices for the Delivery of an Extract from Sorbus domestica L. Leaves Active on the α-Glucosidase Enzyme.

(1) Background: Eudraguard® Natural (EN) and Protect (EP) are polymers regulated for use in dietary supplements in the European Union and the United States to carry natural products, mask unpleasant smells and tastes, ameliorate product handling, and protect products from moisture, light, and oxidation. Moreover, EN and EP can control the release of encapsulated compounds. The aim of this work was the development, preparation, and control of Eudraguard® spray-drying microparticles to obtain powders with easy handling and a stable dietary supplement containing a polar functional extract (SOE) from Sorbus domestica L. leaves. (2) Methods: SOE was characterized using HPLC, NMR, FTIR, DSC, and SEM methods. Furthermore, the SOE's antioxidant/free radical scavenging activity, α-glucosidase inhibition, MTT assay effect on viability in normal cells, and shelf life were evaluated in both the extract and final formulations. (3) Results: The data suggested that SOE, rich in flavonoids, is a bioactive and safe extract; however, from a technological point of view, it was sticky, difficult to handle, and had low aqueous solubility. Despite the fact that EN and EP may undergo changes with spray-drying, they effectively produced easy-to-handle micro-powders with a controlled release profile. Although EN had a weaker capability to coat SOE than EP, EN acted as a substrate that was able to swell, drawing in water and improving the extract solubility and dissolution/release; however, EP was also able to carry the extract and provide SOE with controlled release. (4) Conclusion: Both Eudraguard® products were capable of carrying SOE and improving its antioxidant and α-glucosidase inhibition activities, as well as the extract stability and handling.

The medieval skincare routine according to the formulations of Madgistra Trotula and the Medical School of Salerno and its reflection on cosmetology of the third millennium.

BACKGROUND: Officinal plants, minerals, animal derivatives, and miscellaneous have always been used to treat and improve appearance despite the different aesthetic canons of a specific historical and cultural context. OBJECTIVE: The aim of this work was to make a critical comparison between medieval and modern dermocosmetics analyzing the works of Trotula de Ruggiero, a female doctor of the 11th century teaching and working inside the illustrious "Medical School of Salerno," who devoted particular attention to the promotion of female care, beauty, and well-being. METHODS: We applied the historical-critical method analyzing the Latin text and the nglish translation of the standardized corpus of the main Trotula medieval manuscript De Ornatu Mulierum with a multidisciplinary scientific approach ranging from botany to pharmaceutical chemistry and technology, pharmacology and pathology. RESULTS: We identified the medicinal plants, derivatives of animal origin and minerals used in the recipes of Trotula, highlighting their biological properties in the light of current scientific knowledge. A critical comparison between medieval and modern dermocosmetics is reported also taking into consideration the chemical, pharmaceutical, and technological literature. CONCLUSION: Beyond the obvious changes in the paradigms of cosmetology and the different beauty canons of Middle Age with respect to modern times, our results emphasize the attention of Trotula to female care, beauty and well-being as well as the extraordinary combination of tradition and modernity in her work.

Activity of Colocasia esculenta (Taro) Corms against Gastric Adenocarcinoma Cells: Chemical Study and Molecular Characterization.

Colocasia esculenta (L.) Schott is a tuberous plant, also known as taro, employed as food worldwide for its renowned nutritional properties but also traditionally used in several countries for medical purposes. In this study, methanolic extracts were prepared from the corms and leaves of Colocasia, subsequently fractionated via molecular exclusion chromatography (RP-HPLC) and their anti-tumor activity assessed in an in vitro model of gastric adenocarcinoma (AGS cells). Vorm extract and isolated fractions II and III affected AGS cell vitality in a dose-dependent manner through the modulation of key proteins involved in cell proliferation, apoptosis, and cell cycle processes, such as caspase 3, cyclin A, cdk2, IkBα, and ERK. To identify bioactive molecules responsible for anti-tumoral activity fractions II and III were further purified via RP-HPLC and characterized via nuclear magnetic resonance (NMR) and electrospray mass spectrometry (ESI-MS) techniques. The procedure enabled the identification of ten compounds including lignans and neolignans, some isolated for the first time in taro, uncommon megastigmane derivatives, and a gallic acid derivative. However, none of the isolated constituents showed efficacy equivalent to that of the fractions and total extract. This suggests that the whole Colocasia phytocomplex has intriguing anti-tumor activity against gastric cancer.

In Situ Hydrogel Formulation for Advanced Wound Dressing: Influence of Co-Solvents and Functional Excipient on Tailored Alginate-Pectin-Chitosan Blend Gelation Kinetics, Adhesiveness, and Performance.

Chronic skin wounds affect more than 40 million patients worldwide, representing a huge problem for healthcare systems. This study elucidates the optimization of an in situ gelling polymer blend powder for biomedical applications through the use of co-solvents and functional excipients, underlining the possibility of tailoring microparticulate powder properties to generate, in situ, hydrogels with advanced properties that are able to improve wound management and patient well-being. The blend was composed of alginate, pectin, and chitosan (APC). Various co-solvents (ethanol, isopropanol, and acetone), and salt excipients (sodium bicarbonate and ammonium carbonate) were used to modulate the gelation kinetics, rheology, adhesiveness, and water vapor transmission rate of the gels. The use of co-solvents significantly influenced particle size (mean diameter ranging from 2.91 to 5.05 µm), depending on the solvent removal rate. Hydrogels obtained using ethanol were able to absorb over 15 times their weight in simulated wound fluid within just 5 min, whereas when sodium bicarbonate was used, complete gelation was achieved in less than 30 s. Such improvement was related to the internal microporous network typical of the particle matrix obtained with the use of co-solvents, whereas sodium bicarbonate was able to promote the formation of allowed particles. Specific formulations demonstrated an optimal water vapor transmission rate, enhanced viscoelastic properties, gel stiffness, and adhesiveness (7.7 to 9.9 kPa), facilitating an atraumatic removal post-use with minimized risk of unintended removal. Microscopic analysis unveiled that porous inner structures were influencing fluid uptake, gel formation, and transpiration. In summary, this study provided valuable insights for optimizing tailored APC hydrogels as advanced wound dressings for chronic wounds, including vascular ulcers, pressure ulcers, and partial and full-thickness wounds, characterized by a high production of exudate.

Quality of life and socio-demographic factors associated with nutritional risk in Brazilian community-dwelling individuals aged 80 and over: cluster analysis and ensemble methods.

Introduction: The aim of the present study was to use cluster analysis and ensemble methods to evaluate the association between quality of life, socio-demographic factors to predict nutritional risk in community-dwelling Brazilians aged 80 and over. Methods: This cross-sectional study included 104 individuals, both sexes, from different community locations. Firstly, the participants answered the sociodemographic questionnaire, and were sampled for anthropometric data. Subsequently, the Mini-Mental State Examination (MMSE) was applied, and Mini Nutritional Assessment Questionnaire (MAN) was used to evaluate their nutritional status. Finally, quality of life (QoL) was assessed by a brief version of World Health Organizations' Quality of Life (WHOQOL-BREF) questionnaire and its older adults' version (WHOQOL-OLD). Results: The K-means algorithm was used to identify clusters of individuals regarding quality-of-life characteristics. In addition, Random Forest (RF) and eXtreme Gradient Boosting (XGBoost) algorithms were used to predict nutritional risk. Four major clusters were derived. Although there was a higher proportion of individuals aged 80 and over with nutritional risk in cluster 2 and a lower proportion in cluster 3, there was no statistically significant association. Cluster 1 showed the highest scores for psychological, social, and environmental domains, while cluster 4 exhibited the worst scores for the social and environmental domains of WHOQOL-BREF and for autonomy, past, present, and future activities, and intimacy of WHOQOL-OLD. Conclusion: Handgrip, household income, and MMSE were the most important predictors of nutritional. On the other hand, sex, self-reported health, and number of teeth showed the lowest levels of influence in the construction of models to evaluate nutritional risk. Taken together, there was no association between clusters based on quality-of-life domains and nutritional risk, however, predictive models can be used as a complementary tool to evaluate nutritional risk in individuals aged 80 and over.

Effects of physical distancing by COVID-19 pandemic on diet quality, neurological and immunological markers, and fecal microbiota of Brazilian older women.

Physical distancing was used to prevent transmission of COVID-19, however there are concerns that this may promote harmful impacts on health, such as reduced levels of physical practice and changes in food intake and gut microbiota composition. This study evaluated the impacts of 6 months physical distancing on Brazilian older women upon body mass index (BMI), strength, physical activity level (IPAQ), eating habits, neurological markers (brain-derived neurotrophic factor-BDNF and cortisol), cytokines (IL-2, IL-5, IL-6, IL-10, interferon-IFN-γ, tumor necrosis factor-TNF-α), aging-associated markers (vascular endothelial growth factor-VEGF, insulin-like growth factor-IGF-1, klotho and thymic stromal lymphopoietin-TSLP), besides specific groups of fecal microbiota. Fifteen women, over 60 years old, residents of São Paulo state (Brazil), were evaluated in March and in September 2020. The older adult women, with a mean age 66 ± 6.2 years presented significantly increased BMI and high effect size for non-protective foods consumption, reduced light physical activity and strength 6 months following the physical distancing. Furthermore, the serum concentration of IFN-γ, IGF-1, and IFN-γ/IL-5 were significantly higher, while lower concentration of IL-2 and IL-5 were observed 6 months after the physical distancing. Significant increase was noted only to Blautia spp. abundance after 6 months of physical distancing. Several correlations were observed at both before and after physical distancing, however, interestingly, many of them were lost or inverted 6 months following, while new ones emerged. Taken together, these results showed that lifestyle changes and stress conditions addressed by physical distancing from the COVID-19 pandemic impacted the health of older women included in the present study. Therefore, future follow-up studies are essential to propose interventions in order to restore the health conditions observed before the pandemic period, and thus to maintain the quality of life of older adults in different socioeconomic contexts.

Post-COVID Syndrome: The Research Progress in the Treatment of Pulmonary sequelae after COVID-19 Infection.

Post-COVID syndrome or long COVID is defined as the persistence of symptoms after confirmed SARS-CoV-2 infection, the pathogen responsible for coronavirus disease. The content herein presented reviews the reported long-term consequences and aftereffects of COVID-19 infection and the potential strategies to adopt for their management. Recent studies have shown that severe forms of COVID-19 can progress into acute respiratory distress syndrome (ARDS), a predisposing factor of pulmonary fibrosis that can irreversibly compromise respiratory function. Considering that the most serious complications are observed in the airways, the inhalation delivery of drugs directly to the lungs should be preferred, since it allows to lower the dose and systemic side effects. Although further studies are needed to optimize these techniques, recent studies have also shown the importance of in vitro models to recreate the SARS-CoV-2 infection and study its sequelae. The information reported suggests the necessity to develop new inhalation therapies in order to improve the quality of life of patients who suffer from this condition.

Additive Manufacturing Strategies for Personalized Drug Delivery Systems and Medical Devices: Fused Filament Fabrication and Semi Solid Extrusion.

Novel additive manufacturing (AM) techniques and particularly 3D printing (3DP) have achieved a decade of success in pharmaceutical and biomedical fields. Highly innovative personalized therapeutical solutions may be designed and manufactured through a layer-by-layer approach starting from a digital model realized according to the needs of a specific patient or a patient group. The combination of patient-tailored drug dose, dosage, or diagnostic form (shape and size) and drug release adjustment has the potential to ensure the optimal patient therapy. Among the different 3D printing techniques, extrusion-based technologies, such as fused filament fabrication (FFF) and semi solid extrusion (SSE), are the most investigated for their high versatility, precision, feasibility, and cheapness. This review provides an overview on different 3DP techniques to produce personalized drug delivery systems and medical devices, highlighting, for each method, the critical printing process parameters, the main starting materials, as well as advantages and limitations. Furthermore, the recent developments of fused filament fabrication and semi solid extrusion 3DP are discussed. In this regard, the current state of the art, based on a detailed literature survey of the different 3D products printed via extrusion-based techniques, envisioning future directions in the clinical applications and diffusion of such systems, is summarized.

Inulin-g-poly-D,L-lactide, a sustainable amphiphilic copolymer for nano-therapeutics.

Cancer therapies started to take a big advantage from new nanomedicines on the market. Since then, research tried to better understand how to maximize efficacy while maintaining a high safety profile. Polyethylene glycol (PEG), the gold standard for nanomedicines coating design, is a winning choice to ensure a long circulation and colloidal stability, while in some cases, patients could develop PEG-directed immunoglobulins after the first administration. This lead to a phenomenon called accelerated blood clearance (ABC effect), and it is correlated with clinical failure because of the premature removal of the nanosystem from the circulation by immune mechanism. Therefore, alternatives to PEG need to be found. Here, looking at the backbone structural analogy, the hydrophilicity, flexibility, and its GRAS status, the natural polysaccharide inulin (INU) was investigated as PEG alternative. In particular, the first family of Inulin-g-poly-D,L-lactide amphiphilic copolymers (INU-PLAs) was synthesized. The new materials were fully characterized from the physicochemical point of view (solubility, 1D and 2D NMR, FT-IR, UV-Vis, GPC, DSC) and showed interesting hybrid properties compared to precursors. Moreover, their ability in forming stable colloids and to serve as a carrier for doxorubicin were investigated and compared with the already well-known and well-characterized PEGylated counterpart, polyethylene glycol-b-poly-D,L-lactide (PEG-PLA). This preliminary investigation showed INU-PLA to be able to assemble in nanostructures less than 200 nm in size and capable of loading doxorubicin with an encapsulation efficiency in the same order of magnitude of PEG-PLA analogues.

Floating Ricobendazole Delivery Systems: A 3D Printing Method by Co-Extrusion of Sodium Alginate and Calcium Chloride.

At present, the use of benzimidazole drugs in veterinary medicine is strongly limited by both pharmacokinetics and formulative issues. In this research, the possibility of applying an innovative semi-solid extrusion 3D printing process in a co-axial configuration was speculated, with the aim of producing a new gastro-retentive dosage form loaded with ricobendazole. To obtain the drug delivery system (DDS), the ionotropic gelation of alginate in combination with a divalent cation during the extrusion was exploited. Two feeds were optimized in accordance with the printing requirements and the drug chemical properties: the crosslinking ink, i.e., a water ethanol mixture containing CaCl2 at two different ratios 0.05 M and 0.1 M, hydroxyethyl cellulose 2% w/v, Tween 85 0.1% v/v and Ricobendazole 5% w/v; and alginate ink, i.e., a sodium alginate solution at 6% w/v. The characterization of the dried DDS obtained from the extrusion of gels containing different amounts of calcium chloride showed a limited effect on the ink extrudability of the crosslinking agent, which on the contrary strongly influenced the final properties of the DDS, with a difference in the polymeric matrix toughness and resulting effects on floating time and drug release.

The effect of chemotherapy on dietary intake and nutritional status in patients with colorectal neoplasms and the importance of nutritional counseling.

PURPOSE: This study aimed at assessing the effect of chemotherapy on dietary intake and nutritional status of patients with colorectal cancer undergoing chemotherapy. METHODS: Observational, cross-sectional study conducted with 35 patients of both sexes, aged 50 years or older. Dietary intake was assessed four times: before (T0), twice during (T1 and T2), and after (TF) chemotherapy. Data on energy, macronutrients, and micronutrients were used for assessing dietary intake. Nutritional status was assessed on the first day and at the end of the chemotherapy cycle. The data were treated statistically using a 5% significance level. RESULTS: The intake of energy, carbohydrates, lipids, selenium, and iron was lower after chemotherapy infusion (p < 0.05). Energy consumption decreased when comparing T0 (1419.8 ± 527.1 kcal) with T1 (1181.9 ± 423.2 kcal). Regarding macronutrients, carbohydrates and lipids showed a drop (p < 0.05), but there were no differences in protein intake, and it was observed that the consumption of food sources such as dairy was prioritized. In the analysis of vitamins and minerals, vitamins dropped but without a significant difference. There were significant differences between T1 and TF for iron (9.7 mg ± 4.5 mg and 12.0 ± 4.0 mg) and selenium (77.4 ± 29.7 µg and 93.6 ± 37.8 µg). There was no change in body composition and nutritional status between chemotherapy cycles. CONCLUSION: The treatment reduced patients' food consumption after the chemotherapy session and impacted dietary intake, which demonstrates the importance of nutritional counseling and intervention, especially on energy consumption.

Advanced printable hydrogels from pre-crosslinked alginate as a new tool in semi solid extrusion 3D printing process.

With the aim to overcome alginate shape fidelity issue during the semisolid extrusion 3D printing and matrix collapsing after drying, we speculated that a pre-crosslinking step of the alginate ink-gel with low amount of Ca+2 could improve the hydrogel performance. To verify this, the influence of pre-crosslinker concentration (10-25 mM) on the ink gel rheological properties were studied and flow behaviour and viscoelastic properties were determined. The developed ink gels were fully characterised by DSC and Magnetic Resonance Imaging (MRI). Moreover, extrudability and the shape retention of extruded forms after printing and after drying were studied. The rheological and MRI data, combined with the morphological analysis of printed forms allowed us to identify the relationship between printability, shape retention and shear thinning behaviour of gels, showing good extrudability for all the pre-crosslinked gels with a calcium concentration between 0.15 and 0.25, corresponding to both egg-box dimers and multimers interactions.