Assessment of Gait Patterns during Crutch Assisted Gait through Spatial and Temporal Analysis.

The use of crutches is a common method of assisting people during recovery from musculoskeletal injuries in the lower limbs. There are several different ways to walk with crutches depending on the patient's needs. The structure of crutch gaits or crutch gait patterns varies based on the delay between the aid and foot placement, the number of concurrent points of contact, and laterality. In a rehabilitation process, the prescribed pattern may differ according to the injury, the treatment and the individual's condition. Clinicians may improve diagnosis, assessment, training, and treatment by monitoring and analyzing gait patterns. This study aimed to assess and characterize four crutch walking patterns using spatial and temporal parameters obtained from the instrumented crutches. For this purpose, 27 healthy users performed four different gait patterns over multiple trials. Each trial was recorded using a portable system integrated into the crutches, which measured force, position, and acceleration. Based on the data angle, an algorithm was developed to segment the trials into gait cycles and identify gait phases. The next step was to determine the most appropriate metrics to describe each gait pattern. Several metrics were used to analyze the collected data, including force, acceleration, angle, and stride time. Among 27 participants, significant differences were found between crutch gait patterns. Through the use of these spatial and temporal parameters, promising results were obtained for monitoring assisted gait with crutches. Furthermore, the results demonstrated the possibility of using instrumented crutches as a clinical tool.

Volition-adaptive control for gait training using wearable exoskeleton: preliminary tests with incomplete spinal cord injury individuals.

BACKGROUND: Gait training for individuals with neurological disorders is challenging in providing the suitable assistance and more adaptive behaviour towards user needs. The user specific adaptation can be defined based on the user interaction with the orthosis and by monitoring the user intentions. In this paper, an adaptive control model, commanded by the user intention, is evaluated using a lower limb exoskeleton with incomplete spinal cord injury individuals (SCI). METHODS: A user intention based adaptive control model has been developed and evaluated with 4 incomplete SCI individuals across 3 sessions of training per individual. The adaptive control model modifies the joint impedance properties of the exoskeleton as a function of the human-orthosis interaction torques and the joint trajectory evolution along the gait sequence, in real time. The volitional input of the user is identified by monitoring the neural signals, pertaining to the user's motor activity. These volitional inputs are used as a trigger to initiate the gait movement, allowing the user to control the initialization of the exoskeleton movement, independently. A Finite-state machine based control model is used in this set-up which helps in combining the volitional orders with the gait adaptation. RESULTS: The exoskeleton demonstrated an adaptive assistance depending on the patients' performance without guiding them to follow an imposed trajectory. The exoskeleton initiated the trajectory based on the user intention command received from the brain machine interface, demonstrating it as a reliable trigger. The exoskeleton maintained the equilibrium by providing suitable assistance throughout the experiments. A progressive change in the maximum flexion of the knee joint was observed at the end of each session which shows improvement in the patient performance. Results of the adaptive impedance were evaluated by comparing with the application of a constant impedance value. Participants reported that the movement of the exoskeleton was flexible and the walking patterns were similar to their own distinct patterns. CONCLUSIONS: This study demonstrates that user specific adaptive control can be applied on a wearable robot based on the human-orthosis interaction torques and modifying the joints' impedance properties. The patients perceived no external or impulsive force and felt comfortable with the assistance provided by the exoskeleton. The main goal of such a user dependent control is to assist the patients' needs and adapt to their characteristics, thus maximizing their engagement in the therapy and avoiding slacking. In addition, the initiation directly controlled by the brain allows synchronizing the user's intention with the afferent stimulus provided by the movement of the exoskeleton, which maximizes the potentiality of the system in neuro-rehabilitative therapies.

Event-based control for sit-to-stand transition using a wearable exoskeleton.

Sit-to-stand transition is an essential step in a lower limb rehabilitation therapy, mainly for assisting the patient to transit from wheel chair to the next level of therapy. A mixed stiffness-damping control adaptation is proposed for this task which will help in reaching the final position with a constant velocity. A combination of control model is proposed to ensure the initiation and the final stage of the transition, such as to ensure stability and to maintain the equilibrium. The combined control model helps in reaching the goal position with equal participation from the user. For patient studies, such as with paraplegic patients, a combinational control model with muscle stimulation can be included to provide a complete assistance. The role of muscle stimulation and joint movement assistance is also considered in this control model. Further, final stage of this transition must ensure keeping or helping the user to maintain the upright position.

Control of an Ambulatory Exoskeleton with a Brain-Machine Interface for Spinal Cord Injury Gait Rehabilitation.

The closed-loop control of rehabilitative technologies by neural commands has shown a great potential to improve motor recovery in patients suffering from paralysis. Brain-machine interfaces (BMI) can be used as a natural control method for such technologies. BMI provides a continuous association between the brain activity and peripheral stimulation, with the potential to induce plastic changes in the nervous system. Paraplegic patients, and especially the ones with incomplete injuries, constitute a potential target population to be rehabilitated with brain-controlled robotic systems, as they may improve their gait function after the reinforcement of their spared intact neural pathways. This paper proposes a closed-loop BMI system to control an ambulatory exoskeleton-without any weight or balance support-for gait rehabilitation of incomplete spinal cord injury (SCI) patients. The integrated system was validated with three healthy subjects, and its viability in a clinical scenario was tested with four SCI patients. Using a cue-guided paradigm, the electroencephalographic signals of the subjects were used to decode their gait intention and to trigger the movements of the exoskeleton. We designed a protocol with a special emphasis on safety, as patients with poor balance were required to stand and walk. We continuously monitored their fatigue and exertion level, and conducted usability and user-satisfaction tests after the experiments. The results show that, for the three healthy subjects, 84.44 ± 14.56% of the trials were correctly decoded. Three out of four patients performed at least one successful BMI session, with an average performance of 77.6 1 ± 14.72%. The shared control strategy implemented (i.e., the exoskeleton could only move during specific periods of time) was effective in preventing unexpected movements during periods in which patients were asked to relax. On average, 55.22 ± 16.69% and 40.45 ± 16.98% of the trials (for healthy subjects and patients, respectively) would have suffered from unexpected activations (i.e., false positives) without the proposed control strategy. All the patients showed low exertion and fatigue levels during the performance of the experiments. This paper constitutes a proof-of-concept study to validate the feasibility of a BMI to control an ambulatory exoskeleton by patients with incomplete paraplegia (i.e., patients with good prognosis for gait rehabilitation).

Compliant gait assistance triggered by user intention.

An automatic gait initialization strategy based on user intention sensing in the context of rehabilitation with a lower-limb wearable robot is proposed and evaluated. The proposed strategy involves monitoring the human-orthosis interaction torques and initial position deviation to determine the gait initiation instant and to modify orthosis operation for gait assistance, when needed. During gait, the compliant control algorithm relies on the adaptation of the joints' stiffness in function of their interaction torques and their deviation from the desired trajectories, while maintaining the dynamic stability. As a reference input, the average of a set of recorded gaits obtained from healthy subjects is used. The algorithm has been tested with five healthy subjects showing its efficient behavior in initiating the gait and maintaining the equilibrium while walking in presence of external forces. The work is performed as a preliminary study to assist patients suffering from incomplete Spinal cord injury and Stroke.

Enhancing perception in minimally invasive robotic surgery through self-calibration of surgical instruments.

In minimally invasive surgery (MIS) the 3D perception and hand-eye coordination is reduced. A high degree of sensory-motor skills is required by the surgeon to mediate action and perception. The incorporation of robotic assistants is capable of integrating the required egocentric information to aid the surgeon providing a sense of presence. In this work we propose a robotic vision system as a tool to locate surgical instruments with respect to the surgeon. It estimates the absolute position of the port of entry, in which surgical instruments are inserted to access the patient body. The proposed algorithm shows that it is possible to estimate the orientation of the instruments with respect to the laparoscopic camera applying determined movements through the robotic assistant.