Importance of the Structural and Physicochemical Properties of Silica Nanoshells in the Photothermal Effect of Silica-Coated Au Nanoparticles Suspensions.

In this work, monodisperse silica-coated gold nanoparticles (NPs) were synthesized and used for obtaining aqueous colloidal dispersions with an optimum relationship between colloidal stability and photothermal activity. The idea behind this design was to produce systems with the advantages of the presence of a silica shell (biocompatibility, potential for surface modification, and protecting effect) with a minimal loss of optical and thermal properties. With this aim, the photothermal properties of NPs with silica shells of different thicknesses were analyzed under conditions of high radiation extinction. By using amorphous, gel-like silica coatings, thicknesses higher than 40 nm could be obtained without an important loss of the light absorption capacity of the colloids and with a significant photothermal response even at low NP concentrations. The effects produced by changes in the solvent and in the NP concentration were also analyzed. The results show that the characteristics of the shell control both, the photothermal effect and the optical properties of the colloidal dispersions. As the presence of a silica shell strongly enhances the possibilities of adding cargo molecules or probes, these colloids can be considered of high interest for biomedical therapies, sensing applications, remote actuation, and other technological applications.

Tuning the Photothermal Effect of Carboxylated-Coated Silver Nanoparticles through pH-Induced Reversible Aggregation.

The photothermal response of mercaptoundecanoic acid (MUA)-coated Ag nanoparticles (Ag@MUA NPs) in both aqueous dispersions and paper substrates was determined as a function of pH when irradiated with a green laser or a blue LED source. Aqueous dispersions of Ag@MUA NPs showed an aggregation behavior by acidification that was used for the formation of NPs clusters of variable sizes. Aggregation was induced by changing the pH across the apparent pKa of the acid, higher than the pKa of the free acid. Formation of these aggregates was completely reversible allowing the return to the well-dispersed initial state by simply increasing the pH by the addition of a base. Aggregation produced a shift of the plasmon band that changed the spectra of the dispersions and their ability to be remotely heated when irradiated with visible light. These aggregates could be transferred to paper by simple impregnation of the substrates with the dispersion. On the solid substrate, a higher photothermal response than in the liquid medium was observed. A high local increase of up to 75 °C could be recorded on paper after only 30 s of irradiation with a green laser, whereas a blue LED array was enough for inducing the melting of a solid paraffin (Tm = 36-38 °C) deposited on it. This work demonstrates that photothermal heating can be controlled by the reversible aggregation of NPs to induce different thermal responses in liquid and solid media.

Photobleaching of camphorquinone during polymerization of dimethacrylate-based resins.

OBJECTIVE: The aim of this study was to compare the photobleaching rate of CQ in different dental resins. METHODS: The photodecomposition rate of CQ/amine system in bis-GMA/TEGDMA, bis-EMA and UDMA polymerizing monomers was evaluated at different light intensities. The photobleaching of the CQ was studied by monitoring the decrease in light absorption as a function of continuous irradiation time. The absorption changes were assessed by recording the transmitted light that passed through samples of monomers containing CQ/amine. RESULTS: Complete photobleaching of CQ was observed in all the monomer tested and the rate constant for the photobleaching was proportional to the radiation intensity. Hydrogen abstraction from amines by the excited CQ state via electron transfer and direct hydrogen abstraction from monomer structures were involved in the CQ photoreduction. CQ was photobleached in the absence of coinitiator in a dimethacrylate monomer containing a carbamate functional group (UDMA). This behavior was attributed to the presence of labile hydrogen atoms in the UDMA monomer. The CQ photobleaching rate constant in UDMA containing CQ/amine was similar to that in UDMA in the absence of amine. Moreover, the efficiency of CQ to photoinitiate the polymerization of UDMA in the absence of amine demonstrated that the radicals derived from the UDMA monomer via hydrogen abstraction are highly reactive toward double bonds. SIGNIFICANCE: CQ photoinitiates the polymerization of the UDMA monomer in the absence of amine and the efficiency of this process is comparable to that of traditional bis-GMA and bis-EMA monomers activated with CQ/amine.

Influence of thermal expansion on shrinkage during photopolymerization of dental resins based on bis-GMA/TEGDMA.

OBJECTIVE: The aim of this study was to assess volume changes that occur during photopolymerization of unfilled dental resins based on bis-GMA-TEGDMA. METHODS: The resins were activated for visible light polymerization by the addition of camphorquinone (CQ) in combination with dimethylamino ethylmethacrylate (DMAEMA) or ethyl-4-dimethyl aminobenzoate (EDMAB). A fibre-optic sensing method based on a Fizeau-type interferometric scheme was employed for monitoring contraction during photopolymerization. Measurements were carried out on 10mm diameter specimens of different thicknesses (1 and 2mm). RESULTS: The high exothermic nature of the polymerization resulted in volume expansion during the heating, and this effect was more pronounced when the sample thickness increased. Two approaches to assess volume changes due to thermal effects are presented. Due to the difference in thermal expansion coefficients between the rubbery and glassy resins, the increase of volume due to thermal expansion was greater than the decrease in volume due to thermal contraction. As a result, the volume of the vitrified resins was greater than that calculated from polymerization contraction. The observed trends of shrinkage versus sample thickness are explained in terms of light attenuation across the path length during photopolymerization. SIGNIFICANCE: Results obtained in this research highlight the inherent interlinking of non-isothermal photopolymerization and volumetric changes in bulk polymerizing systems.