Pilot-Scale Thermal Destruction of Per- and Polyfluoroalkyl Substances in a Legacy Aqueous Film Forming Foam.

The destruction of per- and polyfluoroalkyl substances (PFAS) is critical to ensure effective remediation of PFAS contaminated matrices. The destruction of hazardous chemicals within incinerators and other thermal treatment processes has historically been determined by calculating the destruction efficiency (DE) or the destruction and removal efficiency (DRE). While high DEs, >99.99%, are deemed acceptable for most hazardous compounds, many PFAS can be converted to other PFAS at low temperatures resulting in high DEs without full mineralization and the potential release of the remaining fluorocarbon portions to the environment. Many of these products of incomplete combustion (PICs) are greenhouse gases, most have unknown toxicity, and some can react to create new perfluorocarboxylic acids. Experiments using aqueous film forming foam (AFFF) and a pilot-scale research combustor varied the combustion environment to determine if DEs indicate PFAS mineralization. Several operating conditions above 1090 °C resulted in high DEs and few detectable fluorinated PIC emissions. However, several conditions below 1000 °C produced DEs >99.99% for the quantifiable PFAS and mg/m3 emission concentrations of several non-polar PFAS PICs. These results suggest that DE alone may not be the best indication of total PFAS destruction, and additional PIC characterization may be warranted.

The physics of human breathing: flow, timing, volume, and pressure parameters for normal, on-demand, and ventilator respiration.

Normal breathing for healthy humans is taken for granted; it occurs without conscious effort using ambient (1-atmosphere) pressure with 21% oxygen (O2) concentration. The body automatically adjusts for stress, exercise, altitude, and mild disease by increasing the volume and frequency of breathing. Longer term adaptations for exercise and altitude include increases in red blood cell counts and higher concentrations of capillaries in muscle tissue. When more challenging external environmental conditions or pulmonary illnesses exceed the capability for these adaptations, the human system requires technology to maintain sufficient ventilation to preserve life. On the environmental side there are two conditions to be addressed: toxicity of the surrounding atmosphere and changes in external pressure and O2concentration. On the medical side, mechanisms for assisting breathing include O2supplementation at ambient pressure, positive pressure/flow without additional O2, or a combination of both. This overview describes the various technologies applied to maintaining a safe breathing environment. Topics for environmental intervention include filter-based and flowing air-supply masks for toxic environments (occupational and laboratory protection), and on-demand gas supply systems for firefighters, self-contained underwater breathing apparatus divers, and altitude (high performance aircraft, spacecraft) applications. The topics for medical intervention include nasal cannula, continuous positive airway pressure, and medical ventilators. The primary purpose of this article is to provide a basic understanding of normal human breathing and the adaptation of breathing in different environments using available technologies.

Contemporary human breath related topics: aerosols, saliva, and HR-MS bioinformatics from Pittcon 2019.

Researchers from the International Association of Breath Research and the scientific board of the Journal of Breath Research (JBR) attended the annual Pittsburgh Conference and Exposition (Pittcon) in March 2019 in Philadelphia, PA, USA. Herein we report on a series of breath related topics from the meeting featuring sessions on exhaled breath aerosols and development of saliva analysis as a complement to non-invasive breath monitoring. Other contemporary breath related subjects, including bioinformatics, metabolomics, and forensics are also discussed.