Efficacy and safety of combined administration of erythropoietin and iron in comparison to iron therapy alone in orthopaedic surgery: systematic review and metanalysis / Eficacia y seguridad de la administración combinada de eritropoyetina y hierro en comparación con el tratamiento con hierro solo en cirugía ortopédica: revisión sistemática y metaanálisis

Abstract: Introduction: Iron deficiency anaemia in orthopaedic surgery is common and there is increased risk of blood transfusion and associated adverse reactions. The management involves administration of iron (oral or intravenous) and erythropoietin stimulating agents. Material and methods: We searched for PubMed, Embase, Google Scholar and Cochrane database to identify the studies from inception to April 2021. Randomized controlled trials with adult patients undergoing orthopedic surgery were included. The metanalysis compared patients who were administered combination of erythropoietin stimulating agents and iron in one group and iron alone. The primary outcome was the rate of blood transfusion and the secondary outcome studied were postoperative hemoglobin concentration, after treatment hemoglobin levels, and complications like mortality, stroke, myocardial infarction, deep vein thrombosis, pulmonary embolism and renal dysfunction. Results: Eleven studies were included. The combination of ESA and iron decreased number of patients who required blood transfusion in comparison to patients treated with iron therapy alone (RR, 0.73; 95% CI, 0.59 to 0.91, I(2) = 65%; p = 0.005). In subgroup analysis with oral and intravenous iron, the difference was not statistically significant (p = 0.24). Administration of erythropoietin either in high (≥ 80,000 IU) or low dose (≤ 80,000 IU) resulted in lower blood transfusion rates (p = 0.0007) with no significant difference between groups. The risk of mortality, myocardial infarction, stroke, deep vein thrombosis or pulmonary embolism did not significantly increase. Conclusion: Combined administration of ESA and iron versus iron only reduces the number of red blood cell transfusions in the postoperative period in orthopedic procedures with minimal risk of complications.

Resumen: Introducción: La anemia por deficiencia de hierro en la cirugía ortopédica es común y existe un mayor riesgo de transfusión de sangre y reacciones adversas asociadas. El tratamiento implica la administración de hierro (oral o intravenoso) y agentes estimulantes de la eritropoyetina. Material y métodos: Se realizaron búsquedas en PubMed, Embase, Google Académico y la base de datos Cochrane para identificar los estudios desde su inicio hasta Abril de 2021. Se incluyeron ensayos controlados aleatorios con pacientes adultos sometidos a cirugía ortopédica. El metaanálisis comparó pacientes a los que se les administró una combinación de agentes estimulantes de la eritropoyetina y hierro en un grupo y hierro solo. El resultado primario fue la tasa de transfusión de sangre y el resultado secundario estudiado fue la concentración de hemoglobina postoperatoria, los niveles de hemoglobina después del tratamiento y complicaciones como mortalidad, accidente cerebrovascular, infarto de miocardio, trombosis venosa profunda, embolia pulmonar y disfunción renal. Resultados: Se incluyeron 11 estudios. La combinación de AEE y hierro disminuyó el número de pacientes que requirieron transfusión de sangre en comparación con los pacientes tratados con tratamiento con hierro solo (RR, 0.73; IC del 95%, 0.59 a 0.91, I(2) = 65%; p = 0.005). En el análisis de subgrupos con hierro oral e intravenoso, la diferencia no fue estadísticamente significativa (p = 0.24). La administración de eritropoyetina en dosis altas (≥ 80,000 UI) o bajas (≤ 80,000 UI) dio lugar a tasas de transfusión de sangre más bajas (p = 0.0007) sin diferencias significativas entre los grupos. El riesgo de mortalidad, infarto de miocardio, accidente cerebrovascular, trombosis venosa profunda o embolia pulmonar no aumentó significativamente. Conclusión: La administración combinada de AEE y hierro frente al hierro solo reduce el número de transfusiones de glóbulos rojos en el período postoperatorio en procedimientos ortopédicos con un riesgo mínimo de complicaciones.

Efficacy and safety of combined administration of erythropoietin and iron in comparison to iron therapy alone in orthopaedic surgery: systematic review and metanalysis.

INTRODUCTION: Iron deficiency anaemia in orthopaedic surgery is common and there is increased risk of blood transfusion and associated adverse reactions. The management involves administration of iron (oral or intravenous) and erythropoietin stimulating agents. MATERIAL AND METHODS: We searched for PubMed, Embase, Google Scholar and Cochrane database to identify the studies from inception to April 2021. Randomized controlled trials with adult patients undergoing orthopedic surgery were included. The metanalysis compared patients who were administered combination of erythropoietin stimulating agents and iron in one group and iron alone. The primary outcome was the rate of blood transfusion and the secondary outcome studied were postoperative hemoglobin concentration, after treatment hemoglobin levels, and complications like mortality, stroke, myocardial infarction, deep vein thrombosis, pulmonary embolism and renal dysfunction. RESULTS: Eleven studies were included. The combination of ESA and iron decreased number of patients who required blood transfusion in comparison to patients treated with iron therapy alone (RR, 0.73; 95% CI, 0.59 to 0.91, I. CONCLUSION: 2 = 65%; p = 0.005). In subgroup analysis with oral and intravenous iron, the difference was not statistically significant (p = 0.24). Administration of erythropoietin either in high ( 80,000 IU) or low dose ( 80,000 IU) resulted in lower blood transfusion rates (p = 0.0007) with no significant difference between groups. The risk of mortality, myocardial infarction, stroke, deep vein thrombosis or pulmonary embolism did not significantly increase. Combined administration of ESA and iron versus iron only reduces the number of red blood cell transfusions in the postoperative period in orthopedic procedures with minimal risk of complications.

INTRODUCCIÓN: La anemia por deficiencia de hierro en la cirugía ortopédica es común y existe un mayor riesgo de transfusión de sangre y reacciones adversas asociadas. El tratamiento implica la administración de hierro (oral o intravenoso) y agentes estimulantes de la eritropoyetina. MATERIAL Y MÉTODOS: Se realizaron búsquedas en PubMed, Embase, Google Académico y la base de datos Cochrane para identificar los estudios desde su inicio hasta Abril de 2021. Se incluyeron ensayos controlados aleatorios con pacientes adultos sometidos a cirugía ortopédica. El metaanálisis comparó pacientes a los que se les administró una combinación de agentes estimulantes de la eritropoyetina y hierro en un grupo y hierro solo. El resultado primario fue la tasa de transfusión de sangre y el resultado secundario estudiado fue la concentración de hemoglobina postoperatoria, los niveles de hemoglobina después del tratamiento y complicaciones como mortalidad, accidente cerebrovascular, infarto de miocardio, trombosis venosa profunda, embolia pulmonar y disfunción renal. RESULTADOS: Se incluyeron 11 estudios. La combinación de AEE y hierro disminuyó el número de pacientes que requirieron transfusión de sangre en comparación con los pacientes tratados con tratamiento con hierro solo (RR, 0.73; IC del 95%, 0.59 a 0.91, I. CONCLUSIÓN: 2 = 65%; p = 0.005). En el análisis de subgrupos con hierro oral e intravenoso, la diferencia no fue estadísticamente significativa (p = 0.24). La administración de eritropoyetina en dosis altas ( 80,000 UI) o bajas ( 80,000 UI) dio lugar a tasas de transfusión de sangre más bajas (p = 0.0007) sin diferencias significativas entre los grupos. El riesgo de mortalidad, infarto de miocardio, accidente cerebrovascular, trombosis venosa profunda o embolia pulmonar no aumentó significativamente. La administración combinada de AEE y hierro frente al hierro solo reduce el número de transfusiones de glóbulos rojos en el período postoperatorio en procedimientos ortopédicos con un riesgo mínimo de complicaciones.

Enhanced durability, bio-activity and corrosion resistance of stainless steel through severe surface deformation.

Owing to its good biocompatibility and low cost, stainless steel is one of the most widely utilized biomaterial. However, longtime assessment of stainless steel has shown problems related to material degradation, especially localized corrosion and bio-film formation. In addition, the leaching of toxic nickel and chromium ions from stainless steel leads to additional health complications. Here, we utilized submerged friction stir processing, a severe surface deformation technique for significantly enhancing its durability, bio-activity as well as antibacterial resistance. The processing was done with a wide variation in strain rates to produce tunable surface microstructure. High strain-rate processing resulted in nearly single-phase fine-grained microstructure, while slow strain-rate processing developed a dual-phase fine-grained microstructure. The bio-corrosion rate of processed steel was reduced by more than 60 % along with significant enhancement in the pitting resistance. The processed steel showed nearly no bacterial adhesion/biofilm formation, evaluated using S. aureus and E. coli bacterial strains. Further, the processed stainless steel surface demonstrated minimum leaching of the toxic elements, significantly enhancing its appeal for bio-implant applications. The observed behavior was explained based on the formation of a stable passive layer, rich in Cr2O3, as determined using x-ray photoelectron microscopy (XPS) and increased hydrophilicity.

High Tensile Ductility and Strength in Dual-phase Bimodal Steel through Stationary Friction Stir Processing.

The combination of high strength and good ductility are very desirable for advanced structural and functional applications. However, measures to enhance strength typically lead to ductility reduction due to their inverse correlation, nano-grained structures for an instance. Bi-modal grain structure is promising in this regard, but its realization is limited by multiple complex processing steps. Here, we demonstrate a facile single-step processing route for the development of bimodal grain structure in austenitic stainless steel, SS316L. The bimodal structure comprised of fine martensite grains (<500 nm) sandwiched between coarse austenite grains (~10 µm). The dual-phase bimodal structure demonstrated higher yield strength (~620 MPa) compared to ultra-fine grain structure (~450 MPa) concurrent with high uniform tensile ductility (~35%). These exceptional properties are attributed to unique dual-phase, bimodal grain structure which delayed the onset of plastic instability resulting in higher strength as well as larger uniform elongation and work-hardening rate. Our approach may be easily extended to a wide range of material systems to engineer superior performance.

Microwave synthesized complex concentrated alloy coatings: Plausible solution to cavitation induced erosion-corrosion.

Surface phenomenon such as cavitation erosion-corrosion limits the working life and durability of the fluid machines through significantly altering the efficiency. Surface modification is an apparent and economical route for improving the sustainability of these components. Recently developed complex concentrated alloys (CCAs) or high entropy alloys (HEAs) possess exceptional properties owing to high configurational entropy. We developed CCA coatings on the stainless steel using a facial and effective microwave processing technique. The effect of Al molar fraction in AlxCoCrFeNi (x = 0.1-3) CCAs on ultrasonic cavitation erosion-corrosion was investigated in 3.5% NaCl solution. For comparison, cavitation erosion and electrochemical corrosion behavior of the pre- and post-tested samples was also performed. Detailed microstructure and mechanical characterization of the developed coatings were also preformed using different analytical techniques. The equimolar CCA coating showed apical degradation resistance under both pure erosion and erosion-corrosion conditions. The observed behavior is attributed to high strain hardening, optimal hardness, fracture toughness, and utmost stability of the passive layer. The phenomenal conjugation of these properties was associated with highest configurational entropy for equimolar composition resulting in sluggish diffusion, and severe lattice straining. Compared to pits, striations and cracks characterizing the morphology of the degraded stainless steel, the equimolar and Al0.1CoCrFeNi CCAs showed TTS (tearing topograph surface) as the dominant failure mode characterized by presence of microplastic deformation. The degradation of the Al3CoCrFeNi CCA occurred mainly through brittle failure mode. The difference in failure mechanism is related to the mechanical properties and underlying microstructure.

Robot-assisted laparoscopic excision of prostatic utricle in a 3-year old.

Prostatic utricles have traditionally been excised via the open approach or laparoscopically. Recently, the robot-assisted laparoscopic approach has been described in a 19-year-old male. the case of a 3-year-old male with a disorder of sex development (mosaic 45X/46 XY), with multiple associated anomalies, who presented with recurrent UTI is presented. Renal/bladder ultrasound revealed normal bilateral kidneys, and a 4.3 × 2.8 × 3.3 cm cystic mass in the midline posterior to the bladder. Voiding cystourethrogram demonstrated a large cystic mass behind the bladder, concerning for large prostatic utricle. The patient was brought to the operating room and placed in lithotomy. The urethra was examined cystoscopically. The os of the utricle was identified, an open-ended catheter was advanced, the cystoscope was removed, and a Foley was placed. The camera port was introduced supraumbilically, and robotic ports were introduced inferolaterally. Irrigation of the catheter and distension of the utricle allowed manipulation of the utricle to facilitate identification of a plane of dissection. The neck of the utricle was identified and incised. The catheter was removed, transection was completed, and the stump was oversewn. CONCLUSION: Combined cystoscopic and robotic approach to prostatic utricle excision is feasible, safe, and effective in this patient population.

A rare ANOS1 variant in siblings with Kallmann syndrome identified by whole exome sequencing.

Kallmann syndrome is a rare genetic condition causing congenital hypogonadotropic hypogonadism. It presents with delayed puberty, anosmia, and infertility. Here, we set out to identify a causative DNA variant for Kallmann syndrome in two affected brothers of Hispanic ancestry. The male siblings presented with a clinical diagnosis of Kallmann syndrome (anosmia, delayed puberty, azoospermia, and undetectable luteinizing hormone and follicle stimulating hormone levels). Genetic variations were investigated by whole exome sequencing. Potentially pathogenic variants were filtered and prioritized followed by validation by Sanger sequencing in the two brothers and their mother. A pathogenic variant was identified in the ANOS1 gene on the X chromosome: c.1267C>T; both brothers were hemizygous, and their mother was heterozygous for the variant. The variant is a single nucleotide change that introduces a stop codon in exon 9 (p.R423*), likely producing a truncated variant of the protein. This variant has only been reported twice in the literature, in the setting of finding genetic causes for other conditions. This result supports the clinical value of whole exome sequencing for identification of genetic pathogenic variants. Genetic diagnosis is the essential first step for genetic counseling, preimplantation diagnosis, and research for a potential treatment.

Exceptionally high cavitation erosion and corrosion resistance of a high entropy alloy.

Cavitation erosion and corrosion of structural materials are serious concerns for marine and offshore industries. Durability and performance of marine components are severely impaired due to degradation from erosion and corrosion. Utilization of advanced structural materials can play a vital role in limiting such degradation. High entropy alloys (HEAs) are a relatively new class of advanced structural materials with exceptional properties. In the present work, we report on the cavitation erosion behavior of Al0.1CoCrFeNi HEA in two different media: distilled water with and without 3.5wt% NaCl. For comparison, conventionally used stainless steel SS316L was also evaluated in identical test conditions. Despite lower hardness and yield strength, the HEA showed significantly longer incubation period and lower erosion-corrosion rate (nearly 1/4th) compared to SS316L steel. Enhanced erosion resistance of HEA was attributed to its high work-hardening behavior and stable passivation film on the surface. The Al0.1CoCrFeNi HEA showed lower corrosion current density, high pitting resistance and protection potential compared to SS316L steel. Further, HEA showed no evidence of intergranular corrosion likely due to the absence of secondary precipitates. Although, the degradation mechanisms (formation of pits and fatigue cracks) were similar for both the materials, the damage severity was found to be much higher for SS316L steel compared to HEA.

Friction Stir Processing of Stainless Steel for Ascertaining Its Superlative Performance in Bioimplant Applications.

Substrate-cell interactions for a bioimplant are driven by substrate's surface characteristics. In addition, the performance of an implant and resistance to degradation are primarily governed by its surface properties. A bioimplant typically degrades by wear and corrosion in the physiological environment, resulting in metallosis. Surface engineering strategies for limiting degradation of implants and enhancing their performance may reduce or eliminate the need for implant removal surgeries and the associated cost. In the current study, we tailored the surface properties of stainless steel using submerged friction stir processing (FSP), a severe plastic deformation technique. FSP resulted in significant microstructural refinement from 22 µm grain size for the as-received alloy to 0.8 µm grain size for the processed sample with increase in hardness by nearly 1.5 times. The wear and corrosion behavior of the processed alloy was evaluated in simulated body fluid. The processed sample demonstrated remarkable improvement in both wear and corrosion resistance, which is explained by surface strengthening and formation of a highly stable passive layer. The methylthiazol tetrazolium assay demonstrated that the processed sample is better in supporting cell attachment, proliferation with minimal toxicity, and hemolysis. The athrombogenic characteristic of the as-received and processed samples was evaluated by fibrinogen adsorption and platelet adhesion via the enzyme-linked immunosorbent assay and lactate dehydrogenase assay, respectively. The processed sample showed less platelet and fibrinogen adhesion compared with the as-received alloy, signifying its high thromboresistance. The current study suggests friction stir processing to be a versatile toolbox for enhancing the performance and reliability of currently used bioimplant materials.

Magnetic resonance imaging of the proximal upper extremity musculature in boys with Duchenne muscular dystrophy.

There is a pressing need for biomarkers and outcomes that can be used across disease stages in Duchenne muscular dystrophy (DMD), to facilitate the inclusion of a wider range of participants in clinical trials and to improve our understanding of the natural history of DMD. Quantitative magnetic resonance imaging (qMRI) and spectroscopy (MRS) biomarkers show considerable promise in both the legs and forearms of individuals with DMD, but have not yet been examined in functionally important proximal upper extremity muscles such as the biceps brachii and deltoid. The primary objective of this study was to examine the feasibility of implementing qMRI and MRS biomarkers in the proximal upper extremity musculature, and the secondary objective was to examine the relationship between MR measures of arm muscle pathology and upper extremity functional endpoints. Biomarkers included MRS and MRI measures of fat fraction and transverse relaxation time (T 2). The MR exam was well tolerated in both ambulatory and non-ambulatory boys. qMR biomarkers differentiated affected and unaffected participants and correlated strongly with upper extremity function (r = 0.91 for biceps brachii T 2 versus performance of upper limb score). These qMR outcome measures could be highly beneficial to the neuromuscular disease community, allowing measurement of the quality of functionally important muscles across disease stages to understand the natural history of DMD and particularly to broaden the opportunity for clinical trial participation.

Melatonin as a pro-osteogenic agent in oral implantology: a systematic review of histomorphometric outcomes in animals and quality evaluation using ARRIVE guidelines.

The aim of this review was to evaluate the outcomes of preclinical trials that assessed the use of melatonin as a pro-osteogenic agent in the field of oral implantology. Melatonin is a hormone that has been shown to have beneficial antioxidant and bone-metabolic effects. A number of experimental studies have analysed its effect in promoting osseointegration around dental implants in animals. A bibliographic search in PubMed, Scopus and EBSCOhost was performed. Animal studies that quantitatively analysed the pro-osteogenic effect of melatonin were included. Quality assessment of the included studies was performed using the ARRIVE guidelines. Eight studies met the inclusion criteria. The experimental animals used were dogs, rabbits and rats. Melatonin was used in a lyophilized powdered form, an injectable form or as a dipping solution. Six of the eight studies included showed a statistically significant positive effect of melatonin on bone-implant contact and various other histomorphometric parameters. The ARRIVE criteria were generally well reported by the included studies (17.5 ± 1.60/24), although several criteria (including randomization and blinding) were poorly documented, with most of the studies showing a high/unclear risk of bias. The majority of the studies included showed a statistically significant positive effect of melatonin on bone formation around implants. However, the clinical significance of this effect was unclear given the high/unclear risk of bias in the majority of included studies. Given the limited amount of data available, further research should be conducted to evaluate the clinical potential of this pineal hormone in clinically relevant situations, such as compromised sites or patients.

Compressive strength after blast of sandwich composite materials.

Composite sandwich materials have yet to be widely adopted in the construction of naval vessels despite their excellent strength-to-weight ratio and low radar return. One barrier to their wider use is our limited understanding of their performance when subjected to air blast. This paper focuses on this problem and specifically the strength remaining after damage caused during an explosion. Carbon-fibre-reinforced polymer (CFRP) composite skins on a styrene-acrylonitrile (SAN) polymer closed-cell foam core are the primary composite system evaluated. Glass-fibre-reinforced polymer (GFRP) composite skins were also included for comparison in a comparable sandwich configuration. Full-scale blast experiments were conducted, where 1.6×1.3 m sized panels were subjected to blast of a Hopkinson-Cranz scaled distance of 3.02 m kg(-1/3), 100 kg TNT equivalent at a stand-off distance of 14 m. This explosive blast represents a surface blast threat, where the shockwave propagates in air towards the naval vessel. Hopkinson was the first to investigate the characteristics of this explosive air-blast pulse (Hopkinson 1948 Proc. R. Soc. Lond. A 89, 411-413 (doi:10.1098/rspa.1914.0008)). Further analysis is provided on the performance of the CFRP sandwich panel relative to the GFRP sandwich panel when subjected to blast loading through use of high-speed speckle strain mapping. After the blast events, the residual compressive load-bearing capacity is investigated experimentally, using appropriate loading conditions that an in-service vessel may have to sustain. Residual strength testing is well established for post-impact ballistic assessment, but there has been less research performed on the residual strength of sandwich composites after blast.

Congenital infiltrating lipomatosis of the face with exophytic temporomandibular joint ankylosis: a case report and review of the literature.

Congenital infiltrating lipomatosis of the face (CIL-F) is a rare lipomatous lesion with diffuse fatty infiltration of tissues and hyperplasia of underlying bone. We report clinical and CT findings in an unusual case of CIL-F presenting with progressive hemifacial asymmetry, manifesting as severely restricted mouth opening owing to exophytic temporomandibular joint ankylosis. The role of imaging in diagnosis is presented with a review of the literature. Differential diagnosis of CIL-F and its exclusion as a cause of hemifacial hyperplasia are also discussed.

Effect of vitamin D supplementation of low birth weight term Indian infants from birth on cytokine production at 6 months.

BACKGROUND/OBJECTIVES: Vitamin D deficiency has been associated with impaired resistance to infection, which may be mediated by alterations in cytokine responses. We investigated the effect of vitamin D supplementation to infants on whole blood in-vitro cytokine production and on the inflammatory marker, plasma C-reactive protein (CRP). SUBJECTS/METHODS: Blood samples were taken at 6 months of age from infants participating in the DIVIDS (Delhi Infant Vitamin D Supplementation) randomized controlled trial of weekly vitamin D supplements (1400 IU = recommended intake) from birth to 6 months with the aim of decreasing mortality and severe morbidity. We measured plasma CRP and whole blood in-vitro production of tumour necrosis factor-α (TNFα), interferon-γ (INFγ), interleukin (IL)-10 and IL-13 following no stimulation or stimulation with lipopolysaccharide or phytohemagglutinin. RESULTS: Although the intervention improved vitamin D status in a severely deficient population, there were no differences between treatment groups in plasma CRP or in the production of any of the cytokines in either unstimulated or stimulated cultures. Recent illness had limited association with immunological markers. Plasma 25-hydroxyvitamin D levels were not associated with CRP or production of any cytokines. CONCLUSIONS: Vitamin D supplementation did not affect plasma CRP or whole blood cytokine production of vitamin D-deficient low birth weight infants. This is consistent with the lack of effect of vitamin D on mortality and severe morbidity among infants in the DIVIDS trial.

Clinical significance, angiographic characteristics, and short-term outcomes in 30 patients with early coronary artery graft failure.

BACKGROUND: Despite technical advances in coronary artery bypass grafting (CABG), early postoperative myocardial ischaemia still remains a challenging problem. The aim of this study was to determine the incidence, clinical features, angiographic characteristics, and management of early graft failure in the present CABG era. METHODS: Between January 1997 and December 2002, 1731 patients underwent CABG at our institution. Coronary angiography was performed in patients with clinical evidence of early postoperative ischaemia (

Identifying and reducing errors with surgical simulation.

The major determinant of a patient's safety and outcome is the skill and judgment of the surgeon. While knowledge base and decision processing are evaluated during residency, technical skills-which are at the core of the profession-are not evaluated. Innovative state of the art simulation devices that train both surgical tasks and skills, without risk to patients, should allow for the detection and analysis of errors and "near misses". Studies have validated the use of a sophisticated endoscopic sinus surgery simulator (ES3) for training residents on a procedural basis. Assessments are proceeding as to whether the integration of a comprehensive ES3 training programme into the residency curriculum will have long term effects on surgical performance and patient outcomes. Using various otolaryngology residencies, subjects are exposed to mentored training on the ES3 as well as to minimally invasive trainers such as the MIST-VR. Technical errors are identified and quantified on the simulator and intraoperatively. Through a web based database, individual performance can be compared against a national standard. An upgraded version of the ES3 will be developed which will support patient specific anatomical models. This advance will allow study of the effects of simulated rehearsal of patient specific procedures (mission rehearsal) on patient outcomes and surgical errors during the actual procedure. The information gained from these studies will help usher in the next generation of surgical simulators that are anticipated to have significant impact on patient safety.

Anti - inflammatory and sedative - hypnotic activity of the methanolic extract of the leaves of mentha arvensis.

Mentha arvensis Linn, a plant used as traditional medicine and in perfumery, has now been explored for its pharmacological activities as an anti-inflammatory and also as sedativehypnotic plant drug. The methanolic extract of the leaves after being processed, was taken for the pharmacological study. Anti-inflammatory activity was carried out on albino rats. Further, the activity was compared to that of a standard anti-inflammatory drug - nimesulide and the percent inhibition of oedema determined. The sedative hypnotic activity, when carried out on mice, showed the potentiation of pentobarbitone induced sleeping time. The data of average recovery time was analyzed to show the standard deviation from the mean.

Echocardiographic evaluation of left and right ventricular function in mild hypertension.

Thirty-one cases of untreated 'mild hypertension' and equal number of age and sex matched controls with 'normal' blood pressure were evaluated by echocardiography. Patients with mild hypertension had significantly increased left ventricular mass index, concentric remodeling, and diastolic dysfunction. Thickness of right ventricular anterior wall, flow velocities across tricuspid and pulmonary valves were also significantly higher in hypertensives. Pulmonary flow acceleration time was significantly less in hypertensives. On multiple regression analysis, mitral valve 'A' wave velocity alone correlated with systolic blood pressure. Other echocardiographic variables did not have any relation with blood pressure readings. Height, weight, body surface area and body mass index could also explain only around 50% of variability in echocardiographic parameters. Cardiac structure and functions in hypertensives are affected by factors other than blood pressure reading, body surface area or body mass index. Routine echocardiography can be useful in identifying those patients of mild hypertension who have disproportionate increase in left ventricular mass or disproportionate impairment of diastolic functions.