Measurement of single-crystal piezo modulus by the method of diffraction of synchrotron radiation at angles near π.

This article presents measurements of the piezoelectric modulus d 11 of a single crystal of lanthanum gallium silicate (LGS, La3Ga5SiO14). The piezoelectric modulus was measured by X-ray diffraction at angles close to backscattering. Experiments in such schemes are very sensitive to relative changes in the lattice constant in crystals caused by external influences (constant or alternating electric field, mechanical load, temperature change etc.). The development opportunity of the technique is shown, its applicability is evaluated and results of measurement of the LGS single-crystal piezo modulus by the method of diffraction of synchrotron radiation at angles near π are discussed.

[Prospects of endoscopic technology for diagnostics of inflammatory periodontal disease]. / Perspektivy primeneniya endoskopicheskoi tekhnologii dlya diagnostiki vospalitel'nykh zabolevanii parodonta.

The aim of the study was to analyze research methods for periodontitis severity and elaborate the most effective diagnostic combination. Twenty patients with moderate periodontal disease were included in the study. In addition to conventional diagnostic methods depth of periodontal pockets (PP) was measured by means of endoscopic system and cone bean CT. Differences in PP depth estimated by probing and endoscopic evaluation was 1.2±0.4 mm proving endoscopic method to be useful and most precise tool for periodontal diagnostics.

Aperture alignment in autocollimator-based deflectometric profilometers.

During the last ten years, deflectometric profilometers have become indispensable tools for the precision form measurement of optical surfaces. They have proven to be especially suitable for characterizing beam-shaping optical surfaces for x-ray beamline applications at synchrotrons and free electron lasers. Deflectometric profilometers use surface slope (angle) to assess topography and utilize commercial autocollimators for the contactless slope measurement. To this purpose, the autocollimator beam is deflected by a movable optical square (or pentaprism) towards the surface where a co-moving aperture limits and defines the beam footprint. In this paper, we focus on the precise and reproducible alignment of the aperture relative to the autocollimator's optical axis. Its alignment needs to be maintained while it is scanned across the surface under test. The reproducibility of the autocollimator's measuring conditions during calibration and during its use in the profilometer is of crucial importance to providing precise and traceable angle metrology. In the first part of the paper, we present the aperture alignment procedure developed at the Advanced Light Source, Lawrence Berkeley National Laboratory, USA, for the use of their deflectometric profilometers. In the second part, we investigate the topic further by providing extensive ray tracing simulations and calibrations of a commercial autocollimator performed at the Physikalisch-Technische Bundesanstalt, Germany, for evaluating the effects of the positioning of the aperture on the autocollimator's angle response. The investigations which we performed are crucial for reaching fundamental metrological limits in deflectometric profilometry.

Binary pseudo-random patterned structures for modulation transfer function calibration and resolution characterization of a full-field transmission soft x-ray microscope.

We present a modulation transfer function (MTF) calibration method based on binary pseudo-random (BPR) one-dimensional sequences and two-dimensional arrays as an effective method for spectral characterization in the spatial frequency domain of a broad variety of metrology instrumentation, including interferometric microscopes, scatterometers, phase shifting Fizeau interferometers, scanning and transmission electron microscopes, and at this time, x-ray microscopes. The inherent power spectral density of BPR gratings and arrays, which has a deterministic white-noise-like character, allows a direct determination of the MTF with a uniform sensitivity over the entire spatial frequency range and field of view of an instrument. We demonstrate the MTF calibration and resolution characterization over the full field of a transmission soft x-ray microscope using a BPR multilayer (ML) test sample with 2.8 nm fundamental layer thickness. We show that beyond providing a direct measurement of the microscope's MTF, tests with the BPRML sample can be used to fine tune the instrument's focal distance. Our results confirm the universality of the method that makes it applicable to a large variety of metrology instrumentation with spatial wavelength bandwidths from a few nanometers to hundreds of millimeters.

Diffractive refractive optics: the possibility of sagittal focusing in Laue-case diffraction.

The sagittal deviation of a Laue-diffracted X-ray beam caused by the inclination of an exit crystal surface with respect to an entrance crystal surface has been studied both theoretically and experimentally. The use of this effect for sagittal focusing of X-ray synchrotron radiation diffracted by a Laue crystal is suggested. The focusing is based on the refraction effect due to the parabolic profile of an exit or/and entrance surface. The crystal is not bent. In order to achieve a reasonable focusing distance, the crystal should be cut asymmetrically. The experiment was performed at beamline BM5 at the ESRF.

First observation of meridional focusing of an X-ray beam using diffraction by a crystal with a transverse groove.

The possibility of concentrating a synchrotron X-ray beam using diffraction by a single crystal with a properly designed transverse groove on its surface, suggested earlier, has been studied experimentally. Here, the first experimental demonstration of this effect is reported, performed on beamline BM5 at the ESRF. The experimental result confirms the theoretical model.

Sagittal focusing of synchrotron radiation diffracted on the walls of a longitudinal hole drilled into a single-crystal monochromator.

A very simple method of sagittal focusing of X-ray synchrotron radiation is presented. A special ray-tracing program which utilizes the diffraction-refraction effect is developed. It is demonstrated both by ray-tracing simulations and by an experiment whereby a reasonably good sagittal concentration of 8 keV synchrotron radiation may be achieved by diffraction on the walls of a cylindrical hole drilled into an Si crystal. The holes were drilled parallel to the (111) planes and their diameter, 1 mm, was chosen so that the focusing distance fits the geometrical arrangement of beamline BM5 at the ESRF. Two such crystals have been used in a dispersive and non-dispersive arrangement. The better result was achieved using the dispersive arrangement. The intensity at the centre of the focus is increased by five times with respect to unfocused radiation. Excellent agreement exists between the ray-tracing simulations and experimental results.

X-ray diffraction on Si single crystal with a W-shaped longitudinal groove.

The measurement of the sagittal deviation of an X-ray beam diffracted on the inclined surface of an Si(111) single crystal was performed on beamline BM5 at the ESRF, with lambda = 0.1 nm and an inclination angle, beta, of 70 degrees . The measured value agrees with the theory developed in previous papers. The topographic picture of the longitudinal edge shows a structure that can be explained in terms of the properties of inclined diffraction.