Soft X-ray imaging of thick carbon-based materials using the normal incidence multilayer optics.

The high transparency of carbon-containing materials in the spectral region of "carbon window" (lambda approximately 4.5-5nm) introduces new opportunities for various soft X-ray microscopy applications. The development of efficient multilayer coated X-ray optics operating at the wavelengths of about 4.5nm has stimulated a series of our imaging experiments to study thick biological and synthetic objects. Our experimental set-up consisted of a laser plasma X-ray source generated with the 2nd harmonics of Nd-glass laser, scandium-based thin-film filters, Co/C multilayer mirror and X-ray film UF-4. All soft X-ray images were produced with a single nanosecond exposure and demonstrated appropriate absorption contrast and detector-limited spatial resolution. A special attention was paid to the 3D imaging of thick low-density foam materials to be used in design of laser fusion targets.

Extreme ultraviolet spectroscopy diagnostics of low-temperature plasmas based on a sliced multilayer grating and glass capillary optics.

New extreme ultraviolet (EUV) spectroscopic diagnostics of relatively low-temperature plasmas based on the application of an EUV spectrometer and fast EUV diodes combined with glass capillary optics is described. An advanced high resolution dispersive element sliced multilayer grating was used in the compact EUV spectrometer. For monitoring of the time history of radiation, filtered fast EUV diodes were used in the same spectral region (>13 nm) as the EUV spectrometer. The radiation from the plasma was captured by using a single inexpensive glass capillary that was transported onto the spectrometer entrance slit and EUV diode. The use of glass capillary optics allowed placement of the spectrometer and diodes behind the thick radiation shield outside the direction of a possible hard x-ray radiation beam and debris from the plasma source. The results of the testing and application of this diagnostic for a compact laser plasma source are presented. Examples of modeling with parameters of plasmas are discussed.

Fabrication of x-ray zone plates by surface-plasma chemical vapor deposition.

A new cost-efficient sputter-slice technology for hard x-ray (10-30 keV) Fresnel zone plates fabrication, imposing no limitation to aspect ratio, is proposed. By means of a plasma chemical process, SiO(2)/Si(1-x)Ge(x)O(2) glassy film multilayer structures are deposited on a lateral surface of a silica rod, outermost layers being as thin as 100 nm. It has been shown by numerical simulation that for x=0.2 germanium fraction, 100-300 microm zone plate thickness and the number of zones of about 1000, first order diffraction efficiency as high as 20%-30% at the energy of approximately 20 keV can be achieved.

Efficiency of grazing incidence optics: the spiral collimator.

Geometric properties and construction of the spiral collimator are discussed. The expression for the efficiency of power conversion of a divergent soft x-ray point source into a parallel beam is obtained. The efficiency of the spiral collimator is shown to be up to 30-90% in the whole soft x-ray spectral range. This efficiency is limited only by the fundamental reason: x-ray radiation absorption in the mirror coating of the spiral collimator. In this sense, the spiral collimator is more effective than any known x-ray optical collimation system with one or manifold reflections.