Risk assessment of airborne virus transmission in an intensive care unit due to single and sequential coughing.

The virus causing COVID-19 has constantly been mutating into new variants. Some of them are more transmissive and resistant to antibiotics. The current research article aims to examine the airborne transmission of the virus expelled by coughing action in a typical intensive care unit. Both single and sequential coughing actions have been considered to get closer to practical scenarios. The objective is to assess the effectiveness of air change per hour (ACH) on the risk of infection to a healthcare person and how the air change rate influences the dispersion of droplets. Such a study is seldom reported and has significant relevance. A total of four cases were analyzed, of which two were of sequential cough. When the ACH is changed from 6 to 12, the average particle residence time is reduced by ∼7 s. It is found that the risk of infection in the case of sequential cough will be relatively low compared to a single cough if the outlet of the indoor environment is placed above the patient's head. This arrangement also eliminates the requirement of higher ACH, which has significance from an energy conservation perspective.

Role of face masks and ventilation rates in mitigating respiratory disease transmission in ICU.

Indoor environments are major contributing locations where the respiratory virus transmission occurs. Higher air change rate (ACH) values (up to 12) have been recommended in hospital environments to reduce virus transmission. In the present study, the Large Eddy Simulation (LES) data of particle transport in a typical intensive care unit (ICU) is used to calculate the infection risk in close proximity interaction. Three different ACH (6, 9, 12) rates with face masks and one case with a healthy person wearing a face shield are considered. The average resident time of the droplets in the ICU is calculated to find the optimal ACH rate. Of the different types of masks analyzed in the present study, the triple-layer mask has shown the most resistance ([Formula: see text] probability of infection) to the penetration of virus-laden droplets, while the single-layer mask has shown the highest risk of infection (up to [Formula: see text]. The results show that the ACH rate has little effect on close proximity transmission. The ACH 9 case provided optimal value for the particle removal, while the ACH 12 has inferior performance to that of ACH 9. From an energy consumption view, our results recommend not using higher ACH in similar indoor environments. Inside indoor environments, it is advised to wear a three-layer face mask and face shield to reduce the risk of infection.

Multipoint monitoring of amplitude, frequency, and phase of vibrations using concatenated modal interferometers.

Concatenated modal interferometers-based multipoint monitoring system for detection of amplitude, frequency, and phase of mechanical vibrations is proposed and demonstrated. The sensor probes are fabricated using identical photonic crystal fiber (PCF) sections and integrated along a single fiber channel to act as a compact and efficient sensing system. Each identical probe acts as a modal interferometer to generate a stable interference spectrum over the source spectrum. In the presence of an external dynamic field about each probe, the probes respond independently, producing a resultant signal superposition of each interferometer response signal. By analyzing the resultant signals using computational techniques, the vibration parameters applied to each interferometer are realized. The sensing system has an operation range of 1 Hz-1 kHz with a sensitivity of 51.5 pm/V. Such a sensing system would find wide applications at industrial, infrastructural, and medical fronts for monitoring various dynamic physical phenomena.

Double masking protection vs. comfort-A quantitative assessment.

COVID-19 has forced humankind to adopt face masks as an integral part of everyday life. This preventive measure is an effective source control technique to curb the spread of COVID-19 and other similar diseases. The virus responsible for causing COVID-19 has undergone several mutations in the recent past, including B.1.1.7, B.1.351, P.1, and N501Y, B.1.617, with a higher infectious rate. These viruses' variants are mainly responsible for the recent spike in COVID-19 cases and associated steep rise in mortality rate worldwide. Under these circumstances, the Center for Disease Control (CDC) and health experts recommend double masking, which mainly includes a surgical mask and a cotton mask for the general public. This combination provides an additional layer of protection and masks fitment to minimize the leakage of droplets expelled during coughing, sneezing, talking, and breathing. This leakage may cause airborne transmission of the virus. In the present study, we report a systematic quantitative unsteady pressure measurement supplement with flow visualization to quantify the effectiveness of a single and double mask. We have also evaluated double masking consisting of a surgical mask and an N-95 mask used by medical professionals. A simple knot improves the surgical mask fitment significantly, and hence, the leakage of droplets is minimized. The leakage of the droplets was reduced to a large extent by using a double mask combination of a two-layer cotton mask over the surgical mask with a knot. The double mask combination of surgical + N-95 and two-layer cotton + N-95 masks showed the most promising results, and no leakage of the droplets is observed in the forward direction. A double mask combination of surgical and N-95 mask offers 8.6% and 5.6% lower mean and peak pressures compared to surgical, and cotton mask. The best results are observed with cotton and N-95 masks with 54.6% and 23% lower mean and peak pressures than surgical and cotton masks; hence, this combination will offer more comfort to the wearer.

Droplet fate, efficacy of face mask, and transmission of virus-laden droplets inside a conference room.

The second and third waves of coronavirus disease-2019 (COVID-19) pandemic have hit the world. Even after more than a year, the economy is yet to return to a semblance of normality. The conference/meeting room is one of the critical sections of offices that might be difficult not to use. This study analyzes the distribution of the virus-laden droplets expelled by coughing inside a conference room, the effect of ventilation rates, and their positioning. The efficacy of masks is studied to get quantitative information regarding the residence time of the droplets. The effects of evaporation, turbulent dispersion, and external forces have been considered for calculating the droplets' trajectories. We have analyzed six cases, of which two are with masks. Change in the ventilation rate from four air changes per hour (ACH) to eight resulted in a 9 % increment in the number of droplets entrained in the outlet vent, while their average residence time was reduced by ∼ 8 s . The shift in the vents' location has significantly altered droplets' distribution inside a conference room. It results in ∼ 1.5 % of the injected droplets reaching persons sitting across the table, and a similar indoor environment is not recommended. Wearing a mask in the case of eight ACH has presented the best scenario out of the six cases, with a 6.5 % improvement in the number of droplets entrained in the outlet vent and a 9 s decrease in their average residence time compared to the case without a mask. No droplets have reached persons sitting across the table when the infected person is wearing the mask, which follows that a social distancing of 6 ft with a mask is adequate in indoor environments.

Experimental visualization of sneezing and efficacy of face masks and shields.

In the present work, we propose and demonstrate a simple experimental visualization to simulate sneezing by maintaining dynamic similarity to actual sneezing. A pulsed jet with Reynolds number Re = 30 000 is created using compressed air and a solenoid valve. Tracer particles are introduced in the flow to capture the emulated turbulent jet formed due to a sneeze. The visualization is accomplished using a camera and laser illumination. It is observed that a typical sneeze can travel up to 25 ft in ∼22 s in a quiescent environment. This highlights that the present widely accepted safe distance of 6 ft is highly underestimated, especially under the act of a sneeze. Our study demonstrates that a three-layer homemade mask is just adequate to impede the penetration of fine-sized particles, which may cause the spreading of the infectious pathogen responsible for COVID-19. However, a surgical mask cannot block the sneeze, and the sneeze particle can travel up to 2.5 ft. We strongly recommend using at least a three-layer homemade mask with a social distancing of 6 ft to combat the transmission of COVID-19 virus. In offices, we recommend the use of face masks and shields to prevent the spreading of droplets carrying the infectious pathogen. Interestingly, an N-95 mask blocks the sneeze in the forward direction; however, the leakage from the sides and top spreads the sneeze in the backward direction up to 2 ft. We strongly recommend using the elbow or hands to prevent droplet leakage even after wearing a mask during sneezing and coughing.

Vortex Shedding Optical Flowmeter based on Photonic Crystal Fiber.

In the present work we propose a PCF (photonic crystal fiber) based Modal interferometer detector for sensing low flow velocity by detecting the frequency of vortices shed from a bluff body. The proposed novel design encapsulates the interferometric arm inside a metal casing to protect the sensor from harsh process fluids. The characterization of the developed probe is conducted under no flow conditions using a piezo actuator to evaluate the sensor response over wide frequency range (0-500 Hz). The developed sensors shows a reasonably flat response in the tested frequency range. Experiments are conducted by employing the developed sensor behind a bluff body of a vortex flowmeter to measure the frequency of the shed vortices and hence, the fluid flow rate. The low flow rate sensitivity of the vortex flowmeter is improved many folds by using the present sensor and the minimum Reynolds number detected is Re = 5000. A linear trend is observed between the frequency of the vortices and the flow velocity which is desirable for fluid flow measurement. The PCF based interferometric sensor with metal encapsulation makes the vortex flowmeter, sensitive at low flow rates, robust and economical to be used in industrial application.