Fabrication of highly permeable and anti-fouling performance of Poly(ether ether sulfone) nanofiltration membranes modified with zinc oxide nanoparticles.

Membrane fouling is one of the challenging bottleneck problems in waste water treatment by membrane process. The present study constructed a nanofiltration membrane based on the zinc oxide nanoparticle (n-ZnO) integrated Poly(ether ether sulfone) (PEES) membranes. The developed membranes were characterized by X-ray diffraction (XRD), attenuated total reflectance - fourier transform infrared spectroscopy (AT-FTIR), atomic force microscopy (AFM) and scanning electron microscope (SEM) coupled with energy dispersive X-ray (EDX) analysis. Pure water flux, contact angle, molecular weight cut-off, mean pore size and porosity were determined to investigate the influence of n-ZnO on the properties of the membranes. The characterization showed asymmetric configuration of membranes after n-ZnO incorporation. This incorporation also enhanced the hydrophilicity of PEES membrane. The fouling-resistant potential of the membranes was investigated by the model foulant humic acid (HA) and an enhanced anti-fouling irreversible property with a corresponding flux recovery rate of 92.43 % was noted for the prepared membrane. The rejection performance and permeability of HA was 98.03 % and 166.73 L m-2 h-1, respectively, owing to the hydrophilic nature of ZnO particles. Further, modified PEES membrane exhibited superior separation performance for monovalent and divalent anions. PEES/n-ZnO hybrid membrane assisted nanofiltration is an effective process for the improvement of membrane performance and anti-fouling property, demonstrating its immense use in water reclamation.

Understanding the factors affecting adsorption of pharmaceuticals on different adsorbents - A critical literature update.

Remediation of emerging pharmaceutically active compounds (PhACs) as micropollutants in wastewater is of foremost importance as they can cause extremely detrimental effects on life upon bioaccumulation and generation of drug-resistance microorganisms. Presently used physicochemical treatments, such as electrochemical oxidation, nanofiltration and reverse osmosis, are not feasible owing to high operating costs, incomplete removal of contaminants along with toxic by-products formation. Adsorption with the utilization of facile and efficient nanoparticulate adsorbents having distinctive properties of high surface area, excellent adsorption capacity, ability to undergo surface engineering and good regeneration displays great potential in this aspect along with the incorporation of nanotechnology for effective treatment. The application of such nanosorbents provides optimal performance under a wide range of physicochemical conditions, decreased secondary pollution with reduced mechanical stress along with excellent organic compound sequestration capacity, which in turn improves the quality of potable water in a sustainable way compared to current treatments. The present review intends to consolidate the range of factors that affect the process of adsorption of different PhACs on to various nanosorbents and also highlights the adsorption mechanism aiding in the retrieval.

Performance study on adsorptive removal of acetaminophen from wastewater using silica microspheres: Kinetic and isotherm studies.

Owing to the global industrialization, a new generation of pharmaceutical pollutants with high toxicity and persistency have been detected. In the present study, silica microspheres, a promising adsorbent has been employed to investigate the extent of removal of prevalent therapeutic acetaminophen, an emerging micropollutant, from wastewater in isolated batch experiments. The BET surface area of the adsorbent was 105.46 m2/g with a pore size of 15 nm. Characterization of adsorbent by scanning electron microscopy analysis revealed the microparticulate nature with a 15 ± 5 µm particle size. Optimization of reaction parameters for enhanced assimilative removal of pollutants was performed and the highest adsorption of 96.7% of acetaminophen with an adsorption capacity of 89.0 mg/g was observed upon contact time of only 30 min. Mild process conditions of pH 5.0, 20 ppm of acetaminophen, temperature of 303 K, and 100 ppm sorbent concentration further aided in the removal process. Obtained data were best corresponded with the Freundlich isotherm (n = 2.685), indicating highly favorable adsorption. Acetaminophen adsorption kinetics obeyed the pseudo second order and feasible energetic changes were yielded through the thermodynamic analysis. Silica microspheres recovery carried out through a single-step desorption process had a 99.14% retrieval ability.

Simultaneous pretreatment and saccharification process for fermentable sugars production from Casuarina equisetifolia biomass using transgenic Trichoderma atroviride.

With the increase in the cognizance toward the wide and abundant lignocellulosic biomass, a great interest has been garnered toward the production of value-added products from the biomass. Hence, by capitalizing the Casuarina equisetifolia biomass, the current work developed a simultaneous pre-treatment and saccharification (SPS) process using transgenic Trichoderma atroviride. The ability of T. atroviride to produce lignolytic and cellulolytic enzymes was enhanced by optimizing key process parameters. Under the optimized conditions, a maximum of 1245.6 U/kg of cellulase and 1203.36 U/kg of xylanase, 183.2 U/kg of laccase along with 392.36 g/kg of fermentable sugars were obtained. On comparing with acid and alkaline pre-treatment methods, the T. atroviride -mediated SPS process exhibited trace formation of fermentative inhibitors, which resulted in a minimal inhibition of Escherichia coli. Overall, the current work implements the biorefinery concept on Casuarina equisetifolia biomass by advocating circular economy. Implications: Valorization of lignocellulosic waste biomass into value added compound and as biofuel is considered as a promising alternative resource, owing to its availability and low production cost. However, the presence of chemically resistant lignin demands an intensive treatment process, which sometimes leads to the formation of fermentative inhibitors. Casuarina equisetifolia is a deciduous commercial plant, and an average of 125 tonnes/hector of waste is generated annually in India. By considering the demerit of delignification and the wide availability of Casuarina equisetifolia biomass (CB), the current work aimed at the development of a single-pot simultaneous pre-treatment and saccharification (SPS) of CB by transgenic Trichoderma atroviride.