Qualitative and Quantitative Analyses of the Enantiomers of Nicotine and Nornicotine Employing Chiral Supercritical Fluid Chromatography.

An optimized method employing chiral supercritical fluid chromatography with diode array UV-VIS detection has been developed for the quantitative analysis of nicotine and nornicotine enantiomer distributions. The method parameters that were optimized included: column type (stationary phases, Chiralpak IG-3), column temperature (40°C), modifier types and concentration (isopropyl alcohol, 10%), additive types and concentrations (diethylamine, 0.2%), elution times (<6 min, flow rate 3 mL/min) and resolution factor (>1.2). These optimized conditions led to nicotine and nornicotine enantiomer detection limits of ~5 ng/µL with accompanying %RSD values of <2% from the analyses of commercially available nicotine-containing formulations.

Separation of stereoisomers of 7-oxa-bicyclo[2.2.1]heptene sulfonate (OBHS), a Selective Estrogen Receptor Modulator (SERM), via chiral stationary phases using SFC/UV and SFC/MS.

The enantiomeric separation of a racemate of 7-oxa-bicyclo[2.2.1]heptene sulfonate (OBHS) derivatives, a Selective Estrogen Receptor Modulator (SERM), was obtained using supercritical fluid chromatography in tandem with UV and mass spectrometry (SFC/UV and SFC/MS, respectively). Supercritical CO2 modified with methanol or isopropyl alcohol was used with isopropylamine (IPAm), trimethylamine (TEA), or trifluoroacetic acid (TFA) as an additive to obtain the enantiomers separations. Both Chiralpak IC and IA were evaluated for the separation of enantiomers. Results showed enantiomers separation can be achieved in less than 5 min with a resolution greater than 1 and 0.9, respectively, for the different OBHS derivatives (compounds A and B) using supercritical CO2 modified with 40% isopropyl alcohol containing 0.25% IPAm and IC column applying isocratic conditions. Similar conditions were used with the semi-preparative Chiralpak IC column to isolate more than 50 mg of each enantiomer. SFC/MS and SFC/UV results showed pure enantiomers were isolated. Method development via SFC was much simpler than those reported in the literature using HPLC.

Alkyl pyrazine synthesis via an open heated bath with variable sugars, ammonia, and various amino acids.

BACKGROUND: Semi-quantitative characteristics of headspace volatile pyrazines which constituted around 1% by weight of the final product have been previously described. The influence of reactant concentration, reaction temperature, and reaction time on both the yield of total alkyl pyrazines and the distribution pattern of specific identified pyrazines has not been reported. RESULTS: The optimum synthetic conditions were 5 mol L-1 NH4 OH, 2 mol L-1 rhamnose, 0.5 mol L-1 leucine at 110°C for 2 h. The greatest total amount of pyrazines obtained was 17 280 µg of extracted product which translated into 31% 2,6-dimethyl pyrazine, 17% 2-methyl pyrazine, 15% 2-ethyl-6-methyl pyrazine, and 16% 2-isoamyl-6-methyl pyrazine. CONCLUSION: The yield of synthesized pyrazines increased at higher temperatures. Quantitative total and specific pyrazine results as opposed to analysis of only headspace volatiles are more representative of pyrazine synthesis. © 2016 Society of Chemical Industry.

C60 fullerenes from combustion of common fuels.

Releases of C60 fullerenes to the environment will increase with the growth of nanotechnology. Assessing the potential risks of manufactured C60 requires an understanding of how its prevalence in the environment compares to that of natural and incidental C60. This work describes the characterization of incidental C60 present in aerosols generated by combustion of five common fuels: coal, firewood, diesel, gasoline, and propane. C60 was found in exhaust generated by all five fuels; the highest concentrations in terms of mass of C60 per mass of particulate matter were associated with diesel and coal. Individual aerosols from these combustion processes were examined by transmission electron microscopy. No relationship was found between C60 content and either the separation of graphitic layers (lamellae) within the particles, nor the curvature of those lamellae. Estimated global emissions of incidental C60 to the atmosphere from coal and diesel combustion range from 1.6 to 6.3 t yr(-1), depending upon combustion conditions. These emissions may be similar in magnitude to the total amount of manufactured C60 produced on an annual basis. Consequent loading of incidental C60 to the environment may be several orders of magnitude higher than has previously been modeled for manufactured C60.

Brain levels of the neurotoxic pyridinium metabolite HPP+ and extrapyramidal symptoms in haloperidol-treated mice.

The typical antipsychotic haloperidol is a highly effective treatment for schizophrenia but its use is limited by a number of serious, and often irreversible, motor side effects. These adverse drug reactions, termed extrapyramidal syndromes (EPS), result from an unknown pathophysiological mechanism. One theory relates to the observation that the haloperidol metabolite HPP+ (4-(4-chlorophenyl)-1-[4-(4-fluorophenyl)-4-oxobutyl]-pyridinium) is structurally similar to MPP+ (1-methyl-4-phenylpyridinium), a neurotoxin responsible for an irreversible neurodegenerative condition similar to Parkinson's disease. To determine whether HPP+ contributes to haloperidol-induced EPS, we measured brain HPP+ and haloperidol levels in strains of mice at high (C57BL/6J and NZO/HILtJ) and low (BALB/cByJ and PWK/PhJ) liability to haloperidol-induced EPS following chronic treatment (7-10 adult male mice per strain). Brain levels of HPP+ and the ratio of HPP+ to haloperidol were not significantly different between the haloperidol-sensitive and haloperidol-resistant strain groups (P=0.50). Within each group, however, strain differences were seen (P<0.01), indicating that genetic variation regulating steady-state HPP+ levels exists. Since the HPP+ levels that we observed in mouse brain overlap the range of those detected in post-mortem human brains following chronic haloperidol treatment, the findings from this study are physiologically relevant to humans. The results suggest that strain differences in steady-state HPP+ levels do not explain sensitivity to haloperidol-induced EPS in the mice we studied.

Enhancement of volatile aglycone recovery facilitated by acid hydrolysis of glucosides from Nicotiana flower species.

Four different Nicotiana flowers (Nicotiana alata (alata), Nicotiana sylvestris (Sy), Nicotiana suaveolens (Su), and Nicotiana tabacum cv. Flue-Cured (FC)) from farms in Virginia and North Carolina were harvested and promptly quenched with liquid nitrogen and hand-ground prior to analysis. Each Nicotiana flower was pre-extracted with hexane to remove unbound volatiles. Fifteen standard compounds that were thought to be in the pre-extract were employed to aid in GC-MS identification and quantification. Glucosides were then chromatographically isolated and next hydrolyzed via 2 M sulfuric acid for 24 h at 75 °C. For each flower, the products of hydrolysis were extracted in tandem with hexane and dichloromethane (DCM) prior to analysis by GC-MS. The mixture of hexane and DCM extracts of the flowers after hydrolysis were then analyzed for each of 15 external standards via GC-MS to determine the concentration of any isolated flower-derived aglycone. Quantitative results for each of the possible 15 free volatile compounds extracted before and after hydrolysis were compared. Benzyl alcohol, phenethyl alcohol, and cis-3-hexenol were found in all Nicotiana both before and after acid hydrolysis. Enormous increases in the mass of benzyl alcohol and phenethyl alcohol were obtained with all flowers as a result of acid hydrolysis. With selected Nicotiana flowers, significant increases were observed for eugenol and cinnamaldehyde. The significant increases observed in cinnamaldehyde and eugenol upon mild acid hydrolysis strongly indicate that this approach could be a viable alternative process for the production scale isolation of these important natural flavor compounds.

Subcritical fluid chromatography of water soluble nucleobases on various polar stationary phases facilitated with alcohol-modified CO2 and water as the polar additive.

The separation of four water soluble nucleobases (thymine, uracil, adenine, and cytosine) via supercritical fluid chromatography with a CO(2)-based mobile phase containing an alcohol modifier and additive is described. Methanol, ethanol, 1-propanol, and 1-butanol were examined in conjunction with water as a neutral additive. Packed column stationary phases included silica bonded diol, cyanopropyl, and 2-ethyl pyridine. Thymine and uracil eluted with good peak shapes without additive, while adenine and cytosine yielded late eluting, severely tailing peaks. The addition of up to 5% water to each of the five alcohols gave rise to much sharper peaks that eluted under gradient conditions in less than 10 min with no baseline noise. Results with water under identical chromatographic conditions were compared with formic acid and ammonium acetate as additives. Water proved to be much superior to formic acid, and it was comparable to ammonium acetate. The role of water was speculated to not only enhance the solvating power of the binary mobile phase for water soluble analytes, but the common elution pattern exhibited by each of the three stationary phases suggested that water had altered the surface chemistry of the packed phase.

Analytical scale supercritical fluid fractionation and identification of single polar lipids from deoiled soybean lecithin.

The phosphatidylcholine (PC)-enriched fraction from soybean lecithin is of interest due to its critical role in both the pharmaceutical and industrial field. In this work, enhancement of the purity of the PC fraction along with other individual polar lipid fractions was achieved from crude soybean lecithin by using supercritical fluid extraction (SFE) with methanol-modified SC-CO(2). Neutral lipids were first removed from the crude sample using pure CO(2). Then, the effect of CO(2 )pressure, temperature, and modifier percentage on phospholipid (PL) fractionation from deoiled lecithin was compared with and without silica gel mixed with the lecithin. Pure fractions of phosphatidylethanolamine (PE) and PC were obtained by varying the modifier concentration of the extraction fluid at 460 atm and 40 degrees C with silica gel added to the deoiled lecithin. Without silica gel, coextraction of PE and PC was observed. A total of six components were isolated and tentatively identified in the extract of deoiled crude soybean lecithin.

Isomeric enhancement of davanone from natural davana oil aided by supercritical carbon dioxide.

The chemical nature of davanone isolated from natural davana oil via packed column preparative supercritical fluid chromatography with a carbon dioxide-based mobile phase has been defined. Analyses used to characterize davanone included nuclear magnetic resonance spectroscopy, optical rotation, mass spectrometry, headspace solid-phase microextraction, enantiomeric purity via gas chromatography (GC), and GC-coupled olfactometry. For comparison, natural davana oil was subjected to the same types of measurements. The enriched davanone sample was nearly 100% optically pure. This indicates that fractionation of the davana oil with supercritical fluids at near room temperature had little effect on the optical integrity of the sample.

Difference in folate content of green and red sweet peppers (Capsicum annuum) determined by liquid chromatography-mass spectrometry.

Folic acid (pteroylmonoglutamic acid) is used in enriched foods; however, very little folic acid occurs naturally in fruits and vegetables. For the U.S. Department of Agriculture's National Food and Nutrient Analysis Program, a number of fruits and vegetables have been assayed for endogenous folates, by a liquid chromatography-mass spectrometry method, to evaluate the accuracy of existing data for total folate determined by standard microbiological analysis. Folate in red and green sweet peppers (Capsicum annuum) differed notably (70.2 and 20.7 microg/100 g, respectively) and exceeded existing values determined by microbiological assay (18 and 11 microg/100 g, respectively). 5-Methyltetrahydrofolate was the predominant vitamer, but a significant amount of 5-formyltetrahydrolfolate and some 10-formylfolate were present. These findings may assist in making dietary recommendations or developing research diets related to folate. The data from this study have been used to update the folate values in release 19 of the USDA Nutrient Database for Standard Reference.

Purification of pharmaceutical excipients with supercritical fluid extraction.

Supercritical fluid extraction (SFE), with carbon dioxide as the solvent, was tested for its ability to remove common reactive impurities from several pharmaceutical excipient powders including starch, microcrystalline cellulose (MCC), hydroxypropylcellulose (HPC), polyethylene oxide (PEO), and polyvinylpyrrolidone (PVP). Extraction of the small molecule impurities, formic acid and formaldehyde, was conducted using SFE methods under conditions that did not result in visible physical changes to polymeric excipient powders. It could be shown that spiked, largely surface-bound, impurities could be removed effectively; however, SFE could only remove embedded impurities in the excipient particles after significant exposure times due to slow diffusion of the impurities to the particle surfaces. Attempts at hydrogen peroxide extraction were hindered by its low solubility in CO2, thereby effectively precluding SFE for removal of hydrogen peroxide from excipients. This work suggests that SFE will only be commercially useful for removal of low molecular weight impurities in polymeric excipients when migration of the impurities to the particle surfaces is sufficiently rapid for extraction to be completed in a reasonable time frame.

Phytosterol composition of nuts and seeds commonly consumed in the United States.

Phytosterols were quantified in nuts and seeds commonly consumed in the United States. Total lipid extracts were subjected to acid hydrolysis and then alkaline saponfication, and free sterols were analyzed as trimethylsilyl derivatives by capillary GC-FID and GC-MS. Delta5-Avenasterol was quantified after alkaline saponification plus direct analysis of the glucoside. Sesame seed and wheat germ had the highest total phytosterol content (400-413 mg/100 g) and Brazil nuts the lowest (95 mg/100 g). Of the products typically consumed as snack foods, pistachio and sunflower kernel were richest in phytosterols (270-289 mg/100 g). beta-Sitosterol, Delta5-avenasterol, and campesterol were predominant. Campestanol ranged from 1.0 to 12.7 mg/100 g. Only 13 mg/100 g beta-sitosterol was found in pumpkin seed kernel, although total sterol content was high (265 mg/100 g). Phytosterol concentrations were greater than reported in existing food composition databases, probably due to the inclusion of steryl glycosides, which represent a significant portion of total sterols in nuts and seeds.

Bis(m-phenylene)-32-crown-10-based cryptands, powerful hosts for paraquat derivatives.

Four new bis(m-phenylene)-32-crown-10-based cryptands with different third bridges were prepared. Their complexes with paraquat derivatives were studied by proton NMR spectroscopy, mass spectrometry, and X-ray analysis. It was found that these cryptands bind paraquat derivatives very strongly. Specifically, a diester cryptand with a pyridyl nitrogen atom located at a site occupied by either water or a PF(6) anion in analogous complexes exhibited the highest association constant K(a) = 5.0 x 10(6) M(-1) in acetone with paraquat, 9000 times greater than the crown ether system. X-ray structures of this and analogous complexes demonstrate that improved complexation with this host is a consequence of preorganization, adequate ring size for occupation by the guest, and the proper location of the pyridyl N-atom for binding to the beta-pyridinium hydrogens of the paraquat guests. This readily accessible cryptand is one of the most powerful hosts reported for paraquats.

Feasibility study of online supercritical fluid extraction-liquid chromatography-UV absorbance-mass spectrometry for the determination of proanthocyanidins in grape seeds.

Online coupling of supercritical fluid extraction (SFE) with liquid chromatography (LC)-UV absorbance-electrospray ionization (ESI)-mass spectrometry (MS) is evaluated for the determination of proanthocyanidins in grape seeds. The solid-phase intermediate trap is optimized in order to enhance the collection efficiency for the extracted polar components. Pure supercritical CO2 is used first to remove the oil in the seeds. Then methanol-modified CO2 is used to remove the polar components (e.g., phenolic compounds). Catechin and epicatechin (90%) are extracted out of the de-oiled after 240 min with 40% methanol as a modifier. Both singly-linked (B-type) and doubly-linked (A-type) procyanidins are identified by LC-ESI-MS, as well as their galloylated derivatives. The hyphenated system combines the extraction, separation, and detection in series. The experimental design minimizes the chance of analyte oxidation, degradation, and contamination. The traditional off-line SFE-LC method is also studied for comparison with the online method. Both advantages and disadvantages are observed for the online mode.

Synthesis of a symmetric cylindrical bis(crown ether) host and its complexation with paraquat.

The first cylindrical host for paraquat derivatives was prepared and characterized by X-ray analysis. Its complex with paraquat has 1:2 stoichiometry. The complexation is statistical and strong as shown by proton NMR characterization, electrospray mass spectrometry, and X-ray analysis.

Air/light-free hyphenated extraction/analysis system: supercritical fluid extraction on-line coupled with liquid chromatography-UV absorbance/electrospray mass spectrometry for the determination of hyperforin and its degradation products in Hypericum pertoratum.

Hyperforin, which is a major active constituent of the antidepression herbal medicine-Hypericum pertoratum (St. John's wort), is very sensitive to oxygen and light. Our paper reports for the first time an air/light-free extraction-separation-detection hyphenated system and its application to St. John's wort. It involves on-line coupling of supercritical fluid extraction with liquid chromatography-UV absorbance/electrospray ionization mass spectrometry (SFE-LC-UV/ESI-MS). Mass spectral data on the extract that was produced on-line suggested the presence of the major degradation compound of hyperforin-furohyperforin and two of its analogues. Thus, some degradation process must have already occurred in our sample during plant drying or storage. The feasibility of quantitative extraction and analysis of hyperforin by on-line SFE-LC was made possible by optimizing the extraction pressure, temperature, and CO(2) modifier content. High recovery ( approximately 90%) relative to liquid-solid extraction was achieved under optimized conditions.

Formation of dimers of inclusion cryptand/paraquat complexes driven by dipole-dipole and face-to-face pi-stacking interactions.

Dimers of inclusion complexes were formed from a new cryptand and viologens (paraquats) driven by dipole-dipole and face-to-face pi-stacking interactions as shown by mass spectrometric characterization and X-ray analysis.

Sequential fractionation of grape seeds into oils, polyphenols, and procyanidins via a single system employing CO2-based fluids.

Pure supercritical CO(2) was used to remove >95% of the oil from the grape seeds. Subcritical CO(2) modified with methanol was used for the extraction of monomeric polyphenols, whereas pure methanol was used for the extraction of polyphenolic dimers/trimers and procyanidins from grape seed. At optimum conditions, 40% methanol-modified CO(2) removed >79% of catechin and epicatechin from the grape seed. This extract was light yellow in color, and no higher molecular weight procyanidins were detected. Extraction of the same sample after removal of the oils and polyphenols, but now under enhanced solvent extraction conditions using methanol as a solvent, provided a dark red solution shown via electrospray ionization HPLC-MS to contain a relatively high concentration of procyanidins. The uniqueness of the study is attested to by the use of CO(2)-based fluids and the employment of a single instrumental extraction system.

On-line coupling of supercritical CO2 extraction with reversed-phase liquid chromatography for the quantitative analysis of analytes in aqueous matrices.

The first report of on-line coupled supercritical fluid extraction (SFE) with reversed-phase liquid chromatography for the quantitative analysis of analytes in aqueous matrices is described. Two commercial systems (e.g. SFE and HPLC) were connected via a single six-port injection valve. By using water to eliminate residual decompressed CO2 gas in the solid-phase extraction trap, quantitative extraction and transfer were achieved for the target analytes (progesterone, phenanthrene, and pyrene) spiked in water, as well as in real samples (urine and environmental water). During each extraction, no restrictor plugging was realized. Extraction temperature and pressure were optimized. Different amounts of salt were added to the aqueous matrix to enhance ionic strength and thus extraction efficiency. Methanol and 2-propanol were used as CO2 modifiers. Compared with dynamically mixing modifier with the CO2 extraction fluid, pre-spiking the same amount of modifier in the extraction vessel enhanced the recovery approximately 30% for progesterone, phenanthrene, and pyrene due to a "co-extraction effect".

Design for on-line coupling of supercritical fluid extraction with liquid chromatography: quantitative analysis of polynuclear aromatic hydrocarbons in a solid matrix.

Supercritical fluid extraction (SFE) was directly coupled with high-performance liquid chromatography (LC) via the simplest interface--only one six-port injection valve. By using water to eliminate decompressed CO2 gas in the solid-phase octadecylsilica trap, high extraction recovery (> or = 95%) of polynuclear aromatic hydrocarbons (PAHs) from a sand matrix was achieved under optimized conditions. The volume of rinse water had little influence on the recovery, due to the very low solubility of PAHs in water and the sorption properties of the C-18 trap. Different amounts of sand matrix with a fixed mass of analytes have also been tested. No decrease in recovery was found when the matrix (sand) increased from 1 to 10 g. Methanol and acetone were used as a CO2 modifier to enhance the extraction efficiency. Finally, PAHs in naturally contaminated soil were successfully extracted and quantitatively determined by this hyphenated system. Compared to the EPA method (Soxhlet extraction following by GC/MS), on-line SFE-LC gave precise results in a much shorter time.