Improved Performance of Air-Processed Perovskite Solar Cells via the Combination of Chlorine Precursors and Potassium Thiocyanate.

Due to their low cost and high efficiency, hybrid perovskite solar cells (PSCs) have shown the most outstanding competitiveness among third-generation photovoltaic (PV) devices. However, several challenges remain unresolved, among which the limited stability is arguably the main. Chlorine (Cl) has been widely employed to yield PV performances, but the Cl-doping mechanism and its role in mixed-halide PSCs are not entirely understood. Here, we investigate the effect of Cl-doping using different precursors such as formamidinium chloride (FACl), cesium chloride (CsCl), and lead chloride (PbCl2), which lead to the incorporation of Cl at different sites of the perovskite crystal. We demonstrate that the stability and efficiency of air-processed PSCs are strongly affected by Cl bonding into the cationic chloride precursor. Furthermore, adding potassium thiocyanate (KSCN) leads to the maximum efficiency of 18.1%, improving the operational stability with only 18% PCE loss after 520 h, stored under ambient conditions. Incorporating CsCl and KSCN presents an effective approach to further boost the performance and thermal stability of PSCs by tailoring the composition of the perovskite's composition. Finally, we used the slot-die method to demonstrate that our strategy is scalable for large-area devices that have shown similar performance. Our results show that fully air-processed and stable PSCs with high efficiency for large production and commercialization are achievable.

Low-cost photodetector architectures fabricated at room-temperature using nano-engineered silicon wafer and sol-gel TiO2 - based heterostructures.

In the last decades, significant research has been done on the nanocrystalline forms of titanium dioxide (TiO2). Amorphous TiO2 has not been studied intensively despite being significantly less expensive compared to crystalline TiO2. This study reveals significant improvement in UV-VIS photodetection properties from heterostructures fabricated in ambient environment using n-type silicon nanowire arrays and amorphous TiO2 sol-gel. Our ultra-low-cost UV-VIS photodetectors can cover a wide range of applications. We report fast rise/decay time constants of 0.23 ms/0.17 ms and high responsivity up-to 6.0 A/W in the UV and 25.0 A/W in the visible range under low (1 V) external bias. The large surface area due to the nanowire array architecture leads to 2 orders of magnitude enhancement in photo-response. Besides the final electrode deposition, the entire device fabrication is performed using low-cost, all solution-based methods in ambient conditions. These low-cost UV-Visible broadband photodetectors can potentially serve a wide range of applications.

Highly Efficient and Ultrasensitive Large-Area Flexible Photodetector Based on Perovskite Nanowires.

Hybrid organic-inorganic perovskites have shown exceptional semiconducting properties and microstructural versatility for inexpensive, solution-processable photovoltaic and optoelectronic devices. In this work, an all-solution-based technique in ambient environment for highly sensitive and high-speed flexible photodetectors using high crystal quality perovskite nanowires grown on Kapton substrate is presented. At 10 V, the optimized photodetector exhibits a responsivity as high as 0.62 A W-1 , a maximum specific detectivity of 7.3 × 1012 cm Hz1/2 W-1 , and a rise time of 227.2 µs. It also shows remarkable photocurrent stability even beyond 5000 bending cycles. Moreover, a deposition of poly(methyl methacrylate) (PMMA) as a protective layer on the perovskite yields significantly better stability under ambient air operation: the PMMA-protected devices are stable for over 30 days. This work demonstrates a cost-effective fabrication technique for high-performance flexible photodetectors and opens opportunities for research advancements in broadband and large-scale flexible perovskite-based optoelectronic devices.

Hysteresis-Free 1D Network Mixed Halide-Perovskite Semitransparent Solar Cells.

The morphology of hybrid organic-inorganic perovskite films is known to strongly affect the performance of perovskite-based solar cells. CH3 NH3 PbI3-x Clx (MAPbI3-x Clx ) films have been previously fabricated with 100% surface coverage in glove boxes. In ambient air, fabrication generally relies on solvent engineering to obtain compact films. In contrast, this work explores the potential of altering the perovskites microstructure for solar cell engineering. This work starts with CH3 NH3 PbI3-x Clx , films with grain morphology carefully controlled by varying the deposition speed during the spin-coating process to fabricate efficient and partially transparent solar cells. Devices produced with a CH3 NH3 PbI3-x Clx film and a compact thick top gold electrode reach a maximum efficiency of 10.2% but display a large photocurrent hysteresis. As it is demonstrated, the introduction of different concentrations of bromide in the precursor solution addresses the hysteresis issues and turns the film morphology into a partially transparent interconnected network of 1D microstructures. This approach leads to semitransparent solar cells with negligible hysteresis and efficiencies up to 7.2%, while allowing average transmission of 17% across the visible spectrum. This work demonstrates that the optimization of the perovskites composition can mitigate the hysteresis effects commonly attributed to the charge trapping within the perovskite film.

Solvent-Antisolvent Ambient Processed Large Grain Size Perovskite Thin Films for High-Performance Solar Cells.

In recent years, hybrid organic-inorganic halide perovskites have been widely studied for the low-cost fabrication of a wide range of optoelectronic devices, including impressive perovskite-based solar cells. Amongst the key factors influencing the performance of these devices, recent efforts have focused on tailoring the granularity and microstructure of the perovskite films. Albeit, a cost-effective technique allowing to carefully control their microstructure in ambient environmental conditions has not been realized. We report on a solvent-antisolvent ambient processed CH3NH3PbI3-xClx based thin films using a simple and robust solvent engineering technique to achieve large grains (>5 µm) having excellent crystalline quality and surface coverage with very low pinhole density. Using optimized treatment (75% chlorobenzene and 25% ethanol), we achieve highly-compact perovskite films with 99.97% surface coverage to produce solar cells with power conversion efficiencies (PCEs) up-to 14.0%. In these planar solar cells, we find that the density and size of the pinholes are the dominant factors that affect their overall performances. This work provides a promising solvent treatment technique in ambient conditions and paves the way for further optimization of large area thin films and high performance perovskite solar cells.

An ultra-broadband perovskite-PbS quantum dot sensitized carbon nanotube photodetector.

Organic-inorganic perovskites have been hailed as promising candidates for optoelectronic and photovoltaic devices, but their operation remains limited to the visible spectrum. Here, we combine single-wall carbon nanotubes, PbS quantum dots and a perovskite to synthesize hybrid devices suitable for operation in both the visible and near-infrared. The photodetectors thus fabricated show responsivities as high as 0.5 A W-1 and 0.35 A W-1 at 500 nm and at 1300 nm, respectively, with an applied bias of 1 V. Moreover, the incorporation of nanotubes within the perovskite matrix facilitates the carrier extraction, resulting in response time under 250 µs, a gain-bandwidth product of 0.1 MHz and detectivities of 1.4 × 1011 Jones and 0.9 × 1011 Jones at 500 nm and at 1300 nm, respectively. This unique approach opens new pathways for the development of low-cost, high-speed and broadband perovskite-based optoelectronic devices for large-scale manufacturing.