RESUMO
Here, we propose a waveguide-integrated plasmonic Schottky photodetector (PD) operating based on an internal photoemission process with a titanium nitride plasmonic material. The theoretically examined structure employs an asymmetric metal-semiconductor-metal waveguide configuration with one of the electrodes being gold and the second being either gold, titanium, or titanium nitride. For the first time, we measured a Schottky barrier height of 0.67 eV for titanium nitride on p-doped silicon, which is very close to the optimal value of 0.697 eV. This barrier height will enable photodetection with a high signal-to-noise ratio when operating at a wavelength of 1550 nm. In addition to the measured optical properties of high absorption losses and reasonably large real part of the permittivity that are desired for this type of PD, titanium nitride is also compatible with easy integration on existing complementary metal-oxide-semiconductor technology. The use of titanium nitride results in a shorter penetration depth of the optical mode into the metal when compared to Ti, which in turn enhances the probability for transmission of hot electrons to the adjacent semiconductor, giving rise to an enhancement in responsivity.
RESUMO
Here we propose an original waveguide-integrated plasmonic Schottky photodetector that takes full advantage of a thin metal stripe embedded entirely into a semiconductor. The photodetector is based on the long-range dielectric-loaded surface plasmon polariton waveguide with a metal stripe deposited on top of a semiconductor rib and covered by another semiconductor. As the metal stripe is entirely surrounded by semiconductor, all hot electrons with appropriate k-vectors can participate in transitions that highly enhances the electron transfer, and consequently the internal quantum efficiency. In addition, a high coupling efficiency from the photonic waveguide to the photodetector is simulated exceeding 90 % which enhances the external quantum efficiency. Calculations show that a responsivity exceeding 0.5 A/W can be achieved at telecom wavelength of 1550 nm and the bandwidth can exceed 100 GHz. Furthermore, it is shown that titanium nitride is a perfect material for the photodetector as it provides a low Fermi energy and long electron mean free path that enhance the hot electron transfer to the semiconductor. In addition, it shows reasonable metallic behavior and CMOS compatibility. Measurements showed that the Schottky barrier height between titanium nitride and p-doped silicon reaches 0.69-0.70 eV that matches the optimum signal-to-noise ratio operation calculated at 0.697 eV.
RESUMO
Hot electron photovoltaics is emerging as a candidate for low cost and ultra thin solar cells. Plasmonic means can be utilized to significantly boost device efficiency. We separately form the tunneling metal-insulator-metal (MIM) junction for electron collection and the plasmon exciting MIM structure on top of each other, which provides high flexibility in plasmonic design and tunneling MIM design separately. We demonstrate close to one order of magnitude enhancement in the short circuit current at the resonance wavelengths.