Application of pristine and doped SnO2 nanoparticles as a matrix for agro-hazardous material (organophosphate) detection.

With an increasing focus on applied research, series of single/composite materials are being investigated for device development to detect several hazardous, dangerous, and toxic molecules. Here, we report a preliminary attempt of an electrochemical sensor fabricated using pristine Ni and Cr-doped nano tin oxide material (SnO2) as a tool to detect agro-hazardous material, i.e. Organophosphate (OP, chlorpyrifos). The nanomaterial was synthesized using the solution method. Nickel and chromium were used as dopant during synthesis. The synthesized material was calcined at 1000 °C and characterized for morphological, structural, and elemental analysis that showed the formation of agglomerated nanosized particles of crystalline nature. Screen-printed films of powder obtained were used as a matrix for working electrodes in a cyclic voltammogram (CV) at various concentrations of organophosphates (0.01 to 100 ppm). The CV curves were obtained before and after the immobilization of acetylcholinesterase (AChE) on the nanomaterial matrix. An interference study was also conducted with hydroquinone to ascertain the selectivity. The preliminary study indicated that such material can be used as suitable matrix for a device that can easily detect OP to a level of 10 ppb and thus contributes to progress in terms of desired device technology for the food and agricultural-industries.

Sol­Gel Synthesis of Manganese Doped Titanium Oxide Nanoparticles for Electrochemical Sensing of Hydroquinone.

Here we report development of a hydroquinone (HQ) electrochemical sensor using nanosized manganese doped titanium oxide as a composite material. The nanomaterial was synthesized with sol gel method using calculated amount of Mn and Ti atoms resulting into a composite metal oxide. Morphological observations indicated a uniform particle size and shape distribution with almost spherical shape and size of about 20­30 nm. While structural analysis indicated formation of mixed phase of TiO2 and MnO forming MnTiO3. The synthesized nanomaterial was used as a matrix for fabrication of hydroquinone electrochemical sensor and tested over a wide range from 2 mM to 10 mM. The developed electrochemical sensor exhibited sensitivity of 2.96 µA mM⁻¹ (23.55 µA mM⁻¹ cm⁻²) with a detection limit of 7.5 µM, which is rarely reported for such composite nanomaterial.

One-pot synthesis and characterization of Nb2O5 nanopowder.

Nanosized niobium oxide powders were synthesized with a yield of approximately 87% using a simple and facile soft-chemical process. Niobium pentachloride (Nb2Cl5) was used as the precursor which was first converted into niobium ethoxide and then hydrolysed with water to synthesize niobia nanopowder. The synthesized powder was calcined at 500 degrees C for phase conversion to end-centered monoclinic as confirmed by diffraction studies and elemental analysis with a chemical composition in the ratio of Nb:O as 1:2.5. The molecular framework of Nb-O-Nb stretching and asymmetric frequency was confirmed by FT-IR, UV-visible and Raman spectroscopic studies. The size, shape and surface morphology of the powders were observed by SEM and TEM which indicated particle sizes of approximately 20 nm. The surface area of 20 m2/g, pore volume of 0.0538 cm2/g and the average pore size of 6.5 nm2 for the calcined sample were obtained with the help of nitrogen adsorption/desorption method using the Barrett-Joyner-Halenda (BJH) method which indicates that the synthesized powder can be used for catalysis and other surface sensitive applications.

Synthesis, characterization, and structural determination of polynuclear lithium aggregates and factors affecting their aggregation.

The reaction of [(mu3,mu3-EDBP)Li2]2[(mu3-nBu)Li(0.5Et2O)]2 (1) [EDBP-H2 = 2,2'-ethylidenebis(4,6-di-tert-butylphenol)] with 1 equiv of ROH in toluene gave [(mu3,mu3-EDBP)Li2]2[(mu3-OR)Li]2 [R = Bn (2), CH2CH2OEt (3), and nBu (4)]. In the presence of 3 equiv of tetrahydrofuran (THF), the hexanuclear compound 1 slowly decomposed to an unusual pentanuclear Li complex, [(mu2,mu3-EDBP)2Li4(THF)2][(mu3-nBu)Li] (5). Further reaction of 5 with ROH gave [(mu2,mu3-EDBP)2Li4(THF)3][(mu4-OR)Li] [R = Bn (6), nBu (7), and CH2CH2OEt (8)] without a major change in its skeleton. Treatment of 2 with an excess of hexamethylphosphoramide (HMPA) yields [(mu2,mu2-EDBP)Li2(HMPA)2][(mu3-OBn)Li(HMPA)] (9). Compounds [(mu2,mu3-EDBP)2Li4(THF)][(mu4-OCH2CH2OEt)Li]2 (10) and [(mu2,mu2-EDBP)2Li4(mu4-OCH2CH2OEt)(HMPA)]-[Li(HMPA)4]+ (11) can be obtained by the reaction of 3 with an "oxygen-donor solvent" such as THF and HMPA, respectively. Among the compounds described above, 8 has shown great reactivity toward ring-opening polymerization of L-lactide, yielding polymers with very low polydispersity indexes in a wide range of monomer-to-initiator ratios.