Use of vancomycin chiral stationary phase for the enantiomeric resolution of basic and acidic compounds by nano-liquid chromatography.

In this paper we studied the potentiality of nano-liquid chromatography (nano-LC) for the enantiomeric resolution of both basic and acidic compounds of pharmaceutical interest using a vancomycin modified silica stationary phase. Experiments were carried out in a fused silica capillary of 75 microm I.D. packed with chiral modified silica particles of 5 microm diameter, the detection, was done on-line at 195 nm. Enantiomeric resolution of alprenolol, atenolol, metoprolol, oxprenolol, pindolol, propranolol (basic compounds) and some acidic analytes, namely 2-[(5'-benzoyl-2'-hydroxy)phenyl]propionic acid (DF1738Y), 2-[(4'-benzoyloxy-2'-hydroxy)phenyl]propionic acid (DF1770Y), ketoprofen, indoprofen and suprofen was studied by nano-LC utilizing mobile phases containing methanol-acetonitrile-ammonium formate or acetate. The effect of mobile phase composition (buffer type and concentration, organic modifier type and concentration) on chiral resolution (Rs), retention factor (k) and retention time (tR) was also investigated. Good enantiomeric resolution was achieved for basic compounds utilizing the mobile phase containing 90% (MeCN-MeOH)/5% water/5% of 100 mM ammonium acetate pH 4.5. Acidic compounds such as DF1738Y and DF1770Y were better resolved at lower pH 3.5 while ketoprofen, indoprofen and suprofen exhibited the highest resolution at pH 4.5; in this case the mobile phase contained MeOH or MeCN (90%), 5% buffer and 5% of water. The nano-LC method was validated using R-(+)-propranolol as an internal standard finding good repeatability, detection limit, correlation coefficient and recovery and applied to the assay of a pharmaceutical formulation containing a racemic mixture of metoprolol.

An experimental design methodology applied to the enantioseparation of a non-steroidal anti-inflammatory drug candidate.

An experimental design methodology has been applied to the enantioseparation of a new synthesized aryl propionic acid of pharmaceutical interest, namely 2-[(4'-benzoyloxy-2'-hydroxy)phenyl-propionic acid] (DF-1770y) by chiral capillary zone electrophoresis (CCZE). The chiral separation of the studied compound has been achieved employing vancomycin as the chiral selector. The partial filling-counter current method has been used in order to avoid the presence of the absorbing chiral selector in the path length of the detector and to increase the method sensitivity. A central composite design has been employed to optimize the experimental conditions for a fast separation of the enantiomers of the new synthesized aryl propionic acid. Critical parameters such as chiral selector concentration, pH and temperature have been studied to evaluate how they affected responses such as resolution and migration times. The desirability function approach has been employed in order to find the best compromise between the different experimental responses. The proposed CCZE method provided the baseline enantioseparation of the investigated drug. A Britton-Robinson buffer at pH 6.4 supplemented with 7 mM of vancomycin at 22 degrees C and -20 kV were the optimum experimental conditions allowing to achieve the highest enantioresolution of DF-1770y in less than 8.5 min.

Chiral analysis of UV nonabsorbing compounds by capillary electrophoresis using macrocyclic antibiotics: 1. Separation of aspartic and glutamic acid enantiomers.

Glycopeptide antibiotics, namely vancomycin or teicoplanin, were evaluated in capillary electrophoresis for the analysis of UV nonabsorbing compounds such as aspartic and glutamic acid enantiomers. Electrophoretic runs were performed in laboratory-made polyacrylamide-coated capillaries using the partial filling-counter current method in order to avoid the presence on the detector path of the absorbing chiral selector. The background electrolyte consisted of an aqueous or aqueous-organic buffer in the pH range of 4.5-6.5 of sorbic acid/histidine and the appropriate concentration of chiral selector. Several experimental parameters such as antibiotic concentration and type, buffer pH, organic modifier, type and concentration of absorbing co-ion (for the indirect UV detection) were studied in order to find the optimum conditions for the chiral resolution of the two underivatized amino acids in their enantiomers. Among the two investigated chiral selectors, vancomycin resulted to be the most useful chiral selector allowing relatively high chiral resolution of the studied compounds even at low concentration. The optimized method (10 mM sorbic acid/histidine, pH 5, and 10 mM of vancomycin) was used for the analysis of real samples such as teeth dentine and beer.

Use of vancomycin silica stationary phase in packed capillary electrochromatography I. Enantiomer separation of basic compounds.

Chiral separation of basic compounds was achieved by using 75 or 100 microm ID fused-silica capillaries packed with a vanoomycin-modified diol silica stationary phase. The capillary was firstly packed for about 12 cm with a slurry mixture composed of diolsilica (3:1) then with the vancomycin modified diol-silica (3:1) (23 cm), and finally with diol-silica (3:1) for about 2 cm. Frits were prepared by a heating wire at the two ends of the capillary; the detector window was prepared at 8.5 cm from the end of the capillary where vancomycin was not present. The influence of the mobile phase composition (pH and concentration, organic modifier type and concentration) on the velocity of the electroosmotic flow, chiral resolution and enantioselectivity was studied. Good enantiomeric resolution was achieved for atenolol, oxprenolol, propranolol, and venlafaxine using a mobile phase composition of 100 mM ammonium acetate solution (pH 6)/water/acetonitrile (5:5:90 v/v/v) while for terbutaline a mixture of 5:15:80 v/v/v provided the best separations. The use of methanol instead of acetonitrile caused a general increase of enantiomer resolution of the studied compounds together with a reduction of efficiency and detector response. However, the combination of acetonitrile and methanol in the mobile phase (as, e.g., 10% methanol and 80% acetonitrile) allowed to improve the enantiomer resolution with satisfactory detector response.

Enantioresolution of pharmaceutical compounds by capillary electrophoresis. Use of cyclodextrins and antibiotics.

Capillary electrophoresis (CE) is a powerful tool for the analysis of chiral compounds of pharmaceutical interest. The separation of enantiomers can be achieved using a chiral environment responsible for the diastereoisomers formation (stable or labile in the indirect or direct separation method, respectively). A wide number of chiral selectors have been employed in CE and among them cyclodextrins or their derivatives and antibiotics are the most used stereoselective agents. The review surveys the chiral separation of drugs using the above mentioned chiral selectors by CE. The main parameters influencing the enantioresolution, e.g., chiral selector type and concentration, buffer type, concentration, pH, organic modifier as well as the capillary temperature are discussed. Finally some selected applications to real samples such as pharmaceutical formulations, serum, urine are also discussed.

Optical isomer separation of potential analgesic drug candidates by using capillary electrophoresis.

Using cyclodextrin capillary zone electrophoresis (CD-CZE), baseline separation of synthetic potential analgesic drug diastereoisomer candidates 6,11-dimethyl-1,2,3,4,5,6-hexahydro-3-[(2'-methoxycarbonyl-2'-phenylc yclopropyl)methyl]-2,6-methano-3-benzazocin-8-ol (MPCB) and 6,11-dimethyl-1,2,3,4,5,6-hexahydro-3-[[2'-methoxycarbonyl-2'(4-chloroph enyl)cyclopropyl]methyl]-2,6-methano-3-benzazocin-8-ol (CCB) was achieved. Among the cyclodextrins tested (hydroxypropyl-, carboxymethyl- and sulfobutyl-beta-cyclodextrin (HP-beta-CD, CM-beta-CD and SBE-beta-CD)) SBE-beta-CD was found to be the most effective complexing agent, allowing good optical isomer separation. Resolution was also influenced by the CD concentration, pH of the buffer and presence of organic modifier in the background electrolyte. The optimum experimental conditions for the separation of studied analgesic drugs were found using 25 mM borate buffer at pH 9 containing 40 mM of SBE-beta-CD and 20% v/v of methanol. Using the above-mentioned background electrolyte, it was also possible to separate, in the same run, the enantiomers of normetazocine (NMZ) as well as the optical isomers of (+/-)-cis-2-chloromethyl-1-phenyl cyclopropancarboxylic acid methyl ester (PCE) or (+/-)-cis-2-chloromethyl-1-(4-chlorophenyl)cyclopropancarboxylic acid methyl ester (CPCE) reagents used in the synthesis of the studied analgesic drugs).

Use of a Hepta-tyr glycopeptide antibiotic as chiral selector in capillary electrophoresis.

A new glycopeptide antibiotic, MDL 63,246 (Hepta-tyr), of the teicoplanin family, has been evaluated in capillary electrophoresis for the resolution of chiral compounds of pharmaceutical and environmental interest. Electrophoretic separations were carried out in a polyacrylamide-coated capillary using the partial filling-counter current mode with aqueous-organic buffers in the pH range 4-6. Experimental parameters affecting resolution, such as antibiotic concentration, buffer pH, organic modifier type and capillary temperature, were studied. The Hepta-tyr antibiotic exhibited a high enantiorecognition capability towards the studied compounds at very low concentrations (1-2 mg/mL). The optimum experimental conditions were achieved by using a buffer at pH 5 containing acetonitrile at 25 degrees C.

Direct chiral resolution of tiaprofenic acid in pharmaceutical formulations by capillary zone electrophoresis using cyclodextrins as chiral selector.

Capillary zone electrophoresis (CZE) was used for the enantiomeric separation of (R,S)-tiaprofenic acid ([R,S]-Tia) in a pharmaceutical formulation employing an acetate buffer at pH 4.5 and 2,3,6-tri-O-methyl-beta-cyclodextrin (tri-OMe-beta-CD) as the chiral selector. The effect of the concentration of trimethylated-beta-cyclodextrin in the presence of carboxymethylated-beta-cyclodextrin (CM-beta-CD) on enantiomeric resolution of (R,S)-Tia and (R,S)-5-benzoyl-alpha-methyl-3-thiopheneacetic acid (3-isomer of tiaprofenic acid, 3-Tia) was investigated at pH 4, 4.5, and 5.

Further study on the use of uncharged beta-cyclodextrin polymer in capillary electrophoresis: enantiomeric separation of some alpha-hydroxy acids.

Uncharged beta-cyclodextrin polymer was used as chiral selector for the enantiomeric separation of some alpha-hydroxy acids by capillary electrophoresis. Complexation and enantiomeric resolution of mandelic acid, m-hydroxy and p-hydroxymandelic acid, 3,4-dihydroxymandelic acid, as well as 2- and 3-phenyllactic acid were studied, changing the concentration of the beta-cyclodextrin polymer added to the background electrolyte at different pH in the range of 4.5-7. Furthermore, the effects of the concentration of the background electrolyte, column temperature, and applied voltage on chiral resolution were also examined. The best enantiomeric separations were obtained using a background electrolyte at pH 6 containing 100 mg/mL of beta-cyclodextrin polymer.

Aspartate analysis in formulations using a new enzyme sensor.

A biosensor has been developed for the purpose of directly analysing aspartate in pharmaceutical formulations and aspartame in sweeteners. This biosensor consists of an ammonia-sensitive gas-diffusion electrode and the enzyme L-aspartase immobilized by means of polyazetidine on a dialysis membrane.

Separation of alpha-hydroxy acid enantiomers by high performance capillary electrophoresis using copper(II)-L-amino acid and copper(II)-aspartame complexes as chiral selectors in the background electrolyte.

Optical isomers of some alpha-hydroxy acids, namely 2-, 3-phenyllactic acid, mandelic, p-hydroxy-, m-hydroxy and 3,4-di-hydroxymandelic acid, were separated by means of capillary zone electrophoresis in free solution, using copper (II) complexes with L-amino acid or aspartame ligands in the background electrolyte. The concentration and the pH dependence of the enantiomer separations have been studied in the cases of different chiral ligands and/or analytes. With the use of L-proline as ligand only the optical isomers of 3-phenyllactic acid were resolvable, whereas using L-hydroxyproline the D and L forms of all compounds, except for 2-phenyllactic acid, were separated. Better results were obtained with aspartame as chiral ligand.