[(CH3)2NH2]2PdBr4, a layered hybrid halide perovskite semiconductor with improved optical and electrical properties.

Inspired by the success of three-dimensional hybrid perovskites (CH3NH3)PbX3 (X = Cl, Br, I), two-dimensional (2D) organic-inorganic hybrid metal halides have drawn immense attention due to their highly tunable physical properties. Moreover, although 3D hybrid perovskite materials have been reported, the development of new organic-inorganic hybrid semiconductors is still an area in urgent need of investigation. Here, we used the dimethylammonium cation to construct a palladium-based halide perovskite material [(CH3)2NH2]2PdBr4 with a 2D layered structure. This layered perovskite undergoes one endothermic peak at 415 K corresponding to melting of the organic molecule. The thermal stability of the compound is up to about 500 K. The activation energy and conduction mechanisms are discussed, and the optical study shows a gap energy equal to 2.5 eV. The electrical AC conductivity is in the order of 10-4 Ω-1 cm-1, which confirms the semiconductor character of this material and indicates its importance in the optoelectronic domain.

Supramolecular Frameworks Based on Rhenium Clusters Using the Synthons Approach.

The reaction of the K4[{Re6Si8}(OH)a6]·8H2O rhenium cluster salt with pyrazine (Pz) in aqueous solutions of alkaline or alkaline earth salts at 4 °C or at room temperature leads to apical ligand exchange and to the formation of five new compounds: [trans-{Re6Si8}(Pz)a2(OH)a2(H2O)a2] (1), [cis-{Re6Si8}(Pz)a2(OH)a2(H2O)a2] (2), (NO3)[cis-{Re6Si8}(Pz)a2(OH)a(H2O)a3](Pz)·3H2O (3), [Mg(H2O)6]0.5[cis-{Re6Si8}(Pz)a2(OH)a3(H2O)a]·8.5H2O (4), and K[cis-{Re6Si8}(Pz)a2(OH)a3(H2O)a]·8H2O (5). Their crystal structures are built up from trans- or cis-[{Re6Si8}(Pz)a2(OH)a4-x(H2O)ax]x-2 cluster units. The cohesions of the 3D supramolecular frameworks are based on stacking and H bonding, as well as on H3O2-bridges in the cases of (1), (2), (4), and (5) compounds, while (3) is built from stacking and H bonding only. This evidences that the nature of the synthons governing the cluster unit assembly is dependent on the hydration rate of the unit.

Retraction: Ni2[LnCl6] (Ln = EuII, CeII, GdII): the first LnII compounds stabilized in a pure inorganic lattice.

Retraction of 'Ni2[LnCl6] (Ln = EuII, CeII, GdII): the first LnII compounds stabilized in a pure inorganic lattice' by Bianca Baldo et al., Chem. Commun., 2018, 54, 7531-7534.

Anomalous Dynamics of a Nanoconfined Gas in a Soft Metal-Organics Framework.

Dynamics of confined molecules within porous materials is equally important as local structural order, and it is necessary to quantify it and to reveal the microscopic mechanisms ruling it for better control of adsorption applications. In this study, molecular dynamics simulations were carried out to investigate the translational and the rotational dynamics of methanol trapped into the flexible NH2-MIL-53(Al) metal-organics framework (MOF). Indeed, atomistic simulation is nowadays a relevant tool to explore matter at the nanoscale. Very recently it has been shown that the NH2-MIL-53(Al) MOF material was capable to undergo a reversible structural transition (breathing phenomenon) by combining adsorption and thermal stimuli. This flexibility can drastically affect the dynamics of confined molecules and therefore the successful conduct of adsorption applications such as gas storage and separation. Rotational and translational dynamics of confined methanol through nanoporous flexible NH2-MIL-53(Al) MOF were then deeply investigated by exploring a broad range of dynamical properties to extract the molecular mechanisms ruling them. This study allowed us to shed light on the interplay of dynamics of confined fluids and flexibility of porous material and to highlight the physical insights in diffusion mechanisms of confined molecules. Anomalous translational diffusion was evidenced due to a dynamical heterogeneity caused by a combination of a localized dynamics at the subnanometric scale and translational jumps between nanodomains in a zigzag scheme between the hydroxide group of the NH2-MIL-53(Al). Actually, the non-Fickian dynamics of methanol is the result of the specific host-guest interactions and the MOF flexibility involving the pore opening. Eventually, decoupling between both rotational and translational dynamics related to breaking in the Stokes-Einstein relation was highlighted.

Rational synthesis and dimensionality tuning of MOFs from preorganized heterometallic molecular complexes.

Rational synthesis of a series of new heterometallic MOFs was carried out by the judicious choice of the corresponding pivalate complexes [Li2M2(piv)6(py)2] (M = Zn2+, Co2+, piv- = pivalate anion and py = pyridine) as a source of secondary building units, {LiM(O2CR)3} and an organic tricarboxylate linker as a node defining the dimensionality of the framework by the orientation of the carboxylic group in or out of the central aromatic ring plane. Thus the trimesate (btc3-) linker results in 3D srs topology frameworks with intersecting systems or isolated channels, and 1,3,5-benzenetribenzoate (btb3-) results in layered hcb isostructural compounds additionally stabilized with H-π interactions between the layers. The layered compounds demonstrate a permanent porosity with a BET surface area of up to 688 m2·g-1 with the possibility of selective gas adsorption (CO2 over N2 and CH4). Zn-Based coordination polymers show notable color changes and drastic (up to 30 times) quenching of luminescence upon inclusion of different nitroaromatics.

Thermal and Guest-Assisted Structural Transition in the NH2-MIL-53(Al) Metal Organic Framework: A Molecular Dynamics Simulation Investigation.

Reversible structural transition between the Large (LP) and Narrow Pore (NP) forms (breathing phenomena) of the MIL-53(X, X = Al, Cr, Fe, Ga) Metal Organic Framework (MOF) is probably one of the most amazing physical properties of this class of soft-porous materials. Whereas great attention has been paid to the elucidation of the physical mechanism ruling this reversible transition, the effect of the functionalization on the flexibility has been less explored. Among functionalized MIL-53(Al) materials, the case of NH2-MIL-53(Al) is undoubtedly a very intriguing structural transition rarely observed, and the steadier phase corresponds to the narrow pore form. In this work, the flexibility of the NH2-MIL-53(Al) metal organic framework was investigated by means of molecular dynamics simulations. Guest (methanol) and thermal breathing of the NH2-MIL-53(Al) was thus explored. We show that it is possible to trigger a reversible transition between NP and LP forms upon adsorption, and we highlight the existence of stable intermediate forms and a very large pore phase. Furthermore, the NP form is found thermodynamically stable from 240 to 400 K, which is the result of strong intramolecular hydrogen bonds.

Metal Atom Clusters as Building Blocks for Multifunctional Proton-Conducting Materials: Theoretical and Experimental Characterization.

The search for new multifunctional materials displaying proton-conducting properties is of paramount necessity for the development of electrochromic devices and supercapacitors as well as for energy conversion and storage. In the present study, proton conductivity is reported for the first time in three molybdenum cluster-based materials: (H)4[Mo6Br6S2(OH)6]-12H2O and (H)2[Mo6X8(OH)6]-12H2O (X = Cl, Br). We show that the self-assembling of the luminescent [Mo6L8i(OH)6a]2-/4- cluster units leads to both luminescence and proton conductivity (σ = 1.4 × 10-4 S·cm-1 in (H)2[Mo6Cl8(OH)6]-12H2O under wet conditions) in the three materials. The latter property results from the strong hydrogen-bond network that develops between the clusters and the water molecules and is magnified by the presence of protons that are statistically shared by apical hydroxyl groups between adjacent clusters. Their role in the proton conduction is highlighted at the molecular scale by ab initio molecular dynamics simulations that demonstrate that concerted proton transfers through the hydrogen-bond network are possible. Furthermore, thermogravimetric analysis also shows the ability of the compounds to accommodate more or less water molecules, which highlights that vehicular (or diffusion) transport probably occurs within the materials. An infrared fingerprint of the mobile protons is finally proposed based on both theoretical and experimental proofs. The present study relies on a synergic computational/experimental approach that can be extended to other proton-conducting materials. It thus paves the way to the design and understanding of new multifunctional proton-conducting materials displaying original and exciting properties.

Ni2[LnCl6] (Ln = EuII, CeII, GdII): the first LnII compounds stabilized in a pure inorganic lattice.

Here we report the first examples of 3d-4f compounds based on LnII cations. We have obtained a series of Ni2[LnCl6] isostructural compounds where LnII = Ce 1, Eu 2 and Gd 3 which were characterized in a cubic crystalline system with a Fm3[combining macron]m space group. Magnetic and optical characterization was also performed on this new class of compounds.

Stabilization of Ni2+ dimers in hexacyano Mo6 cluster-based Prussian blue derivatives: experimental and theoretical investigations of magnetic properties.

Herein, two new octahedral molybdenum cyanide cluster compounds, namely [{Ni(NH3)6}4{Ni2(NH3)8}1][Mo6Br6Q2(CN)6]3·12H2O, Q = S (1) and Se (2), have been synthesized as single crystals by slow diffusion of a solution of nickel chloride into aqueous ammonia solutions of a K2Cs2[Mo6Br6Q2(CN)6] molybdenum cyanide cluster-based compound. Both 1 and 2 were structurally characterized by single-crystal X-ray diffraction. They are isostructural and crystallize in the cubic system (Im3[combining macron]m (no. 229); Z = 2, a = 18.147(1) Å, and V = 5976(1) Å3 and a = 18.188(2) Å and V = 6016(2) Å3 for 1 and 2, respectively). 1 and 2 are based on the association of [Mo6Bri6Qi2(CN)a6]4- (Q = S, Se) cluster anions with Ni2+ dimer-based cubic [Ni2(NH3)8]4+ and octahedral [Ni(NH3)6]2+ cations. The structure is based on 2-fold interpenetrated [{Ni(NH3)6}4{Ni2(NH3)8}1][Mo6Br6Q2(CN)6]3 frameworks related to each other by [½, ½, ½] translation. The unit cell is based on a body-centered cubic framework of cubic [Ni2(NH3)8]4+. The [Mo6Bri6Qi2(CN)a6]4- (Q = S, Se) cluster units are located in the middle of the edges and at the center of the faces of the cell. The [{Ni(NH3)6}]2+ cations are located at the center of the cubes of the a/2 edge. The dimers [Ni2(NH3)8]4+ are stabilized by hydrogen bonds between the cyanide ligands of the cluster unit and the hydrogen atoms of the ammonia molecules. Both compounds exhibit a weak antiferromagnetic coupling within the [Ni2(NH3)8]4+ dimer entities at low temperatures together with a paramagnetic behavior originating from the cations of the octahedral [{Ni(NH3)6}]2+ complexes.

First copper(ii) phase M'0.2Mn0.8PS3·0.25H2O and analogous M' = Co(II), Ni(II) and Zn(II) materials obtained by microwave assisted synthesis.

M'0.2Mn0.8PS3·0.25H2O materials are obtained by a mild microwave assisted reaction (M' = Co(II), Ni(II), Cu(II), Zn(II)), which permitted us to obtain the first copper(ii) bimetallic phase. All these materials have a lower energy gap and antiferromagnetic interactions with lower values of the Weiss constant, than that of the pristine phase MnPS3.

Superstructure of a substituted zeolitic imidazolate metal-organic framework determined by combining proton solid-state NMR spectroscopy and DFT calculations.

We report the supercell crystal structure of a ZIF-8 analog substituted imidazolate metal-organic framework (SIM-1) obtained by combining solid-state nuclear magnetic resonance and powder X-ray diffraction experiments with density functional theory calculations.

Effect of co-existing ions during the preparation of alumina by electrolysis with aluminum soluble electrodes: structure and defluoridation activity of electro-synthesized adsorbents.

The electrochemical dissolution of aluminum was carried out to prepare hydrated aluminas which were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), chemical titrations and defluoridation activities. Aluminas were obtained at controlled pH depending upon the counter cations of the electrolyte. A boehmite AlOOH phase was isolated mainly in ammonium solution, while aluminas synthesized in the other media contained a mixture of phases, usually both boehmite and bayerite γ-Al(OH)3. All the boehmite phases contained nano-crystallites of less than 3 nm. Batch defluoridation experiments revealed a second influence of the original electrolyte. Aluminas were very effective in defluoridation with abatement rates of 99.5%, 98.5% and 97.3% from neutral fluoride solution at 10 mgL(-1) when they were prepared in solution of (NH4)2SO4, (NH4)HCO2 and NH4Cl, respectively. The maximum fluoride capacities were 46.94; 10.25 and 12.18 mg g(-1) for aluminas prepared in solution of (NH4)2SO4; (NH4)HCO2 and NH4Cl, respectively. The amount of dissolved Al was found to be less than 0.19 mgL(-1) at neutral pH. These results show that a defluoridation with electro-synthesized aluminas would be more efficient and safe than a direct electrocoagulation.

DFT-assisted structure determination of α1- and α2-VOPO4: new insights into the understanding of the catalytic performances of vanadium phosphates.

Structural investigations on vanadium phosphates, which are extensively used as catalysts in industry, often resulted in important advances in the understanding of the mechanisms driving the catalytic oxidation of light hydrocarbons. Layer translations in the two lamellar vanadium phosphates α1- and α2-VOPO4 phases identified during the catalysis were investigated by the combination of first-principles calculations, synchrotron X-ray powder diffraction, single-crystal X-ray diffraction and solid-state NMR. This analysis reveals an important feature: the α1-form is the only polymorph of VOPO4 to exhibit layer translations that prevent the formation of infinite VO6 chains. A detailed investigation of this structural characteristic in vanadium phosphates reveals the correlation between the presence of infinite VO6 chains and the catalytic performances of related phases.

Yttrium ethyl-enediammonium squarate tetra-hydrate.

The title compound, {(C(2)H(10)N(2))(1.5)[Y(C(4)O(4))(3)(H(2)O)(4)]}(n) {system-atic name: catena-poly[sesqui(ethyl-enediammonium) [[tetra-aquabis-(squarato-κO)yttrium(III)]-µ-squarato-κ(2)O:O']]}, was synthesized by slow evaporation of an acid solution. The asymetric unit contains one yttrium cation in an anti-prismatic environnement, three squarate groups, one and a half protonated ethyl-enediamine mol-ecules and four water mol-ecules. YO(8) polyhedra are connected through bis-(mono-dentate) squarates, leading to infinite zigzag chains, in between which are located ammonium groups. A framework of hydrogen bonds between protonated amine N atoms, water mol-ecules and squarate anions ensures the cohesion of the structure.

A second monoclinic polymorph of ethyl-enediammonium bis-(hydrogen squarate) monohydrate.

The title compound, C(2)H(10)N(2) (2+)·2HC(4)O(4) (-)·H(2)O, a new polymorph of ethyl-enediammonium bis-(hydrogen squarate) monohydrate, was synthesized by slow evaporation of an acid solution. The asymetric unit contains two hydrogen squarate anions, two half-mol-ecules of protonated ethyl-enediamine arranged around a twofold axis and one water mol-ecule. In the crystal, N-H⋯O and O-H⋯O hydrogen bonds between the hydrogen squarate anions, protonated N atoms from the amine group and water mol-ecules lead to a three-dimensional framework. In particular, the cohesion between the squarate groups is ensured by very short intermolecular hydrogen bonds bonds. The title compound crystallized together with the previously reported polymorph [Mathew et al. (2002 ▶). J. Mol. Struct.641, 263-279].

VOPO4·H2O: a stacking faults structure studied by X-ray powder diffraction and DFT-D calculations.

The dehydration process of VOPO(4)·2H(2)O occurs in two steps corresponding to successive elimination of the two crystallographically distinct water molecules. The intermediate phase VOPO(4)·H(2)O has been stabilized for X-ray powder diffraction studies. The resulting data suggest a tetragonal cell (a = 6.2203(2) Å and c = 6.18867(7) Å), but an important anisotropy in the line broadening points out the necessity of considering a not perfectly organized structure. Because of the layered structure of this compound, density functional theory calculations including dispersion corrections have been carried out to evaluate the possible presence of stacking faults. The results of these calculations give information about the nature of the translations and their probabilities using a Boltzmann distribution. DIFFaX+ simulations of the X-ray powder diffraction pattern have been carried out using the results of the theoretical calculations and confirm the presence and nature of stacking faults.

A monoclinic pseudopolymorph of manganese squarate dihydrate, Mn(mu-C(4)O(4))(H(2)O)(2), built from cubic units.

The structure of poly[[[hexaaquatrimanganese(II)]-tri-mu-squarato] monohydrate], {[Mn(3)(C(4)O(4))(3)(H(2)O)(6)].H(2)O}(n), synthesized hydrothermally, consists of a new three-dimensional framework described by secondary building units (SBUs) containing two MnO(6) octahedra and three squarate groups in a cube-shaped arrangement. In the asymmetric unit, one squarate group is located around an inversion centre (4a; 0, 0, 0), two Mn atoms [4d (3/4, 1/4, 0) and 4c (1/4, 1/4, 0)] are located on inversion centres and the third Mn atom is on a twofold axis (4e; 0, y, 1/4). This report illustrates the concept of the SBU and the flexibility of the squarate spacer in the design of new porous topologies.

The Kagomé topology of the gallium and indium metal-organic framework types with a MIL-68 structure: synthesis, XRD, solid-state NMR characterizations, and hydrogen adsorption.

The vanadium-based terephthalate analogs of MIL-68 have been obtained with gallium and indium (network composition: M(OH)(O(2)C-C(6)H(4)-CO(2)), M = Ga or In) by using a solvothermal synthesis technique using N,N-dimethylformamide as a solvent (10 and 48 h, for Ga and In, respectively, at 100 degrees C). They have been characterized by X-ray diffraction analysis; vibrational spectroscopy; and solid-state (1)H and (1)H-(1)H radio-frequency-driven dipolar recoupling (RFDR), (1)H-(1)H double quantum correlation (DQ), and (13)C{(1)H} cross polarization magic angle spinning (CPMAS) NMR spectroscopy. The three-dimensional network with a Kagomé-like lattice is built up from the connection of infinite trans-connected chains of octahedral units MO(4)(OH)(2) (M = Ga or In), linked to each other through the terephthalate ligands in order to generate triangular and hexagonal one-dimensional channels. The presence of DMF molecules with strong interactions within the channels as well as their departure upon calcination (150 degrees C under a primary vacuum) of the materials has been confirmed by subjecting MIL-68 (Ga) to solid-state (1)H MAS NMR. The (1)H-(1)H RFDR and (1)H-(1)H DQ spectra revealed important information on the spatial arrangement of the guest species with respect to the hybrid organic-inorganic network. (13)C{(1)H} CPMAS NMR of activated samples provided crystallographically independent sites in agreement with X-ray diffraction structure determination. Brunauer-Emmett-Teller surface areas are 1117(24) and 746(31) m(2) g(-1) for MIL-98 (Ga) and MIL-68 (In), respectively. Hydrogen adsorption isotherms have been measured at 77 K, and the storage capacities are found to be 2.46 and 1.98 wt % under a saturated pressure of 4 MPa for MIL-68 (Ga) and MIL-68 (In), respectively. For comparison, the hydrogen uptake for the aluminum trimesate MIL-110, which has an open framework with 16 A channels, is 3 wt % under 4 MPa.

New 3pi-2spiro ladder-type phenylene materials: synthesis, physicochemical properties and applications in OLEDs.

New routes to ladder-type phenylene materials 1 and 2 are described. The oligomers 1 and 2, which possess a "3pi-2spiro" architecture, have been synthesized by using extended diketone derivatives 3 and 10 as key intermediates. The physicochemical properties of the new blue-light emitter 2 were studied in detail and compared with those of the less-extended 1. Owing to the recent development of fluorenone derivatives and their corresponding more conjugated analogues as potential electron-transport materials in organic light-emitting diodes (OLEDs) and as n-type materials for photovoltaic applications, we also report herein the thermal, optical and electrochemical behavior of the key intermediates, diketones 3 and 10. Finally, the application of dispiro 2 as a new light-emitting material in OLEDs is reported.

Structural and luminescent properties of micro- and nanosized particles of lanthanide terephthalate coordination polymers.

Reaction in water between rare earth ions (Ln = Y, La-Tm, except Pm) and the sodium salt of terephthalic acid leads to a family of lanthanide-based coordination polymers of general formula [Ln2(C8H4O4)3(H2O)4] n with Ln = La-Tm or Y. The isostructurality of the compounds with the previously reported Tb-containing polymer is ascertained on the basis of their X-ray powder diffraction diagrams. The coordination water molecules can be reversibly removed without destroying the crystal structure for compounds involving one of the lighter lanthanide ions (La-Eu). For compounds involving one of the heavier lanthanide ions (Tb-Tm) or yttrium, a structural change occurs during the drying process. X-ray diffraction data show this new anhydrous phase corresponding to the linking of pairs of Er(III) ions through mu-carboxylate bridges. Porosity profiles calculated for the anhydrous phases of Tb(III) and Er(III) show the presence of channels with very small sections. The luminescent properties of all the compounds have been recorded and the two most luminescent polymers, namely, the europium- and the terbium-containing ones, have been studied in more detail. Tb(III)-containing compounds display large quantum yields, up to 43%. Polyvinylpyrrolidone nanoparticles doped with [Ln2(C8H4O4)3(H2O)4] n (Ln = Eu, Tb, Er) have also been synthesized and characterized. The encapsulation of the coordination polymers results in somewhat reduced luminescence intensities and lifetime, but the nanoparticles can be dispersed in water and remain unchanged in this medium for more than 20 h.