Heterogeneous Photocatalysis and Photoelectrocatalysis: From Unselective Abatement of Noxious Species to Selective Production of High-Value Chemicals.

Heterogeneous photocatalysis and photoelectrocatalysis have been considered as oxidation technologies to abate unselectively noxious species. This article focuses instead on the utilization of these methods for selective syntheses of organic molecules. Some promising reactions have been reported in the presence of various TiO2 samples and the important role played by the amorphous phase has been discussed. The low solubility of most of the organic compounds in water limits the utilization of photocatalysis. Dimethyl carbonate has been proposed as an alternative green organic solvent. The recovery of the products by coupling photocatalysis with pervaporation membrane technology seems to be a solution for future industrial applications. As far as photoelectrocatalysis is concerned, a decrease in recombination of the photogenerated pairs occurs, enhancing the rate of the oxidation reactions and the quantum yield. Another benefit is to avoid reaction(s) between the intermediates and the substrate, as anodic and cathodic reactions take place in different places.

Advances in selective conversions by heterogeneous photocatalysis.

Selective photocatalytic conversions are offering an alternative green route for replacing environmentally hazardous processes with safe and energy efficient routes. This paper reports the most recent advances in the application of heterogeneous photocatalysis to synthesize valuable compounds by selective oxidation and reduction.

Home-prepared anatase, rutile, and brookite TiO(2) for selective photocatalytic oxidation of 4-methoxybenzyl alcohol in water: reactivity and ATR-FTIR study.

TiO(2) catalysts of anatase, rutile and brookite phase were prepared at low temperature and tested for carrying out the photocatalytic partial oxidation of 4-methoxybenzyl alcohol to 4-methoxybenzaldehyde (p-anisaldehyde) in organic-free water suspensions. Traces of 4-methoxybenzoic acid and open-ring products were the only by-products present, CO(2) being the other main oxidation product. Rutile exhibited the highest yield to p-anisaldehyde (62% mol) at a rate of the same order of magnitude of that showed by the other samples. Commercial rutile and anatase photocatalysts were also used for the sake of comparison. The samples have been characterised by an in situ ATR-FTIR investigation carried out in conditions simulating the photoreaction ones.

Oxidation of aromatic alcohols in irradiated aqueous suspensions of commercial and home-prepared rutile TiO(2): a selectivity study.

The photocatalytic oxidation of benzyl alcohol (BA) and 4-methoxybenzyl alcohol (MBA) has been performed in pure water by using commercial TiO(2) samples (Sigma-Aldrich, Merck, Degussa P25) and rutile TiO(2) prepared from TiCl(4) at low temperature. Particular attention has been devoted to the identification of the produced aromatic compounds along with the formed CO(2). Oxidation products such as the corresponding aromatic aldehyde and acid, as well as mono- and dihydroxylated aldehydes have been detected. The home-prepared rutile sample showed a marked selectivity towards the formation of the aromatic aldehyde (38 and 60 % for BA and MBA, respectively), resulting in a three- to sevenfold improvement relative to commercial samples, with the only byproduct being CO(2). This catalyst was found to be the most selective in the formation of aldehyde in water. By using the commercial or the calcined home-prepared samples, many hydroxylated aromatic compounds were detected besides the aldehyde and the acid. This finding points to a higher selectivity performance of the home-prepared rutile relative to the commercial TiO(2) samples. Some of the home-prepared samples were also dialysed to check the influence of the presence of Cl(-) species on catalyst reactivity and selectivity. We have attempted to explain the different reaction rate and selectivity observed for MBA and BA.

Photocatalysis: a promising route for 21st century organic chemistry.

One of the main goals of 21st century chemistry is to replace environmentally hazardous processes with energy efficient routes allowing to totally avoid the use and production of harmful chemicals and to maximise the quantity of raw material that ends up in the final product. Selective photocatalytic conversions will play a major role in this evolution and this account shows how photocatalysis is offering an alternative green route for the production of organics.

Influence of the substituent on selective photocatalytic oxidation of aromatic compounds in aqueous TiO2 suspensions.

Experimental results are reported showing that the photocatalytic oxidation of aromatic compounds containing an electron-donor group (EDG) gives rise mainly to ortho- and para-monohydroxy derivatives while in the presence of an electron-withdrawing group (EWG) all the monohydroxy derivatives are obtained.

Photocatalytic oxidation of methyl-orange in aqueous suspension: comparison of the performance of different polycrystalline titanium dioxide.

The photocatalytic oxidation of methyl-orange (C14H14N3SO3Na) dye was carried out in aqueous suspensions of polycrystalline TiO2 irradiated with artificial light until its complete mineralization was achieved. The performances of two widely used semiconductor powders were studied for comparison purposes. The dependence of dye photo-oxidation rate on various experimental parameters, including substrate concentration, semiconductor amount, and pH was investigated by using both catalysts. The observed dye degradation rates followed pseudo-first order kinetics with respect to the substrate concentration under the experimental conditions used. The two investigated TiO2 powders (Degussa P25 and Merck) showed different photoactivities. TOC analyses confirmed the complete mineralization achievable using both photocatalysts. Three main transient products still maintaining the chromophoric azo group were identified prior to their transformation into other degradation products which are non-absorbing in the visible region.

Azo-dyes photocatalytic degradation in aqueous suspension of TiO2 under solar irradiation.

The photodegradation of two common and very stable azo-dyes, i.e. methyl-orange (C14H14N3SO3Na) and orange II (C16H11N2SO4Na), is reported. The photocatalytic oxidation was carried out in aqueous suspensions of polycrystalline TiO2 irradiated by sunlight. Compound parabolic collectors, installed at the "Plataforma Solar de Almería" (PSA, Spain) were used as the photoreactors and two identical reacting systems allowed to perform photoreactivity runs for the two dyes at the same time and under the same irradiation conditions. The disappearance of colour and substrates together with the abatement of total organic carbon content was monitored. The main sulfonate-containing intermediates were found to be in lower number in respect to those obtained under artificial irradiation. In particular there were no more evidence of the presence of hydroxylated transients. The dependence of dye photooxidation rate on: (i) substrate concentration; (ii) catalyst amount; and (iii) initial pH was investigated. The influence of the presence of strong oxidant species (H2O2, S2O8(2-)) and some ions (Cl-, SO4(2-)) on the process was also studied.

Photocatalytic degradation of actual textile industrial wastewater in aqueous suspensions of polycrystalline TiO2.

Heterogeneous photocatalytic oxidation of contaminants present in wastewater produced by a textile industry was carried out. The samples were withdrawn from the plant before and after a traditional biological treatment. The effluents were named A and A' (before the biological treatment), B and B' (after the biological treatment). Polycrystalline TiO2 (Degussa P25) was used as the catalyst in a batch photoreactor with immersed lamp. An almost complete decolorization was observed after about 0.5 divided by 1 hours for both kinds of effluents, but the decrease of the total organic carbon (TOC) concentration occurred more slowly. The influence of some chemical oxidants, i.e. ozone, hydrogen peroxide and peroxydisulfate on the photo-oxidation rate was also investigated. After addition of H2O2 or S2O8(2-) TOC decreased more quickly only for B and B'. The runs performed by using O3 as bubbling gas showed a mineralization rate higher than that observed in the presence of O2.