A Bifunctional Electrocatalyst for OER and ORR based on a Cobalt(II) Triazole Pyridine Bis-[Cobalt(III) Corrole] Complex.

As alternative energy sources are essential to reach a climate-neutral economy, hydrogen peroxide (H2 O2 ) as futuristic energy carrier gains enormous awareness. However, seeking for stable and electrochemically selective H2 O2 ORR electrocatalyst is yet a challenge, making the design of-ideally-bifunctional catalysts extremely important and outmost of interest. In this study, we explore the application of a trimetallic cobalt(II) triazole pyridine bis-[cobalt(III) corrole] complex CoII TP[CoIII C]2 3 in OER and ORR catalysis due to its remarkable physicochemical properties, fast charge transfer kinetics, electrochemical reversibility, and durability. With nearly 100 % selective catalytic activity towards the two-electron transfer generated H2 O2 , an ORR onset potential of 0.8 V vs RHE and a cycling stability of 50 000 cycles are detected. Similarly, promising results are obtained when applied in OER catalysis. A relatively low overpotential at 10 mA cm-2 of 412 mV, Faraday efficiency 98 % for oxygen, an outstanding Tafel slope of 64 mV dec-1 combined with superior stability.

A Bifunctional Electrocatalyst for OER and ORR based on a Cobalt(II) Triazole Pyridine Bis-[Cobalt(III) Corrole] Complex.

As alternative energy sources are essential to reach a climate-neutral economy, hydrogen peroxide (H2O2) as futuristic energy carrier gains enormous awareness. However, seeking for stable and electrochemically selective H2O2 ORR electrocatalyst is yet a challenge, making the design of-ideally-bifunctional catalysts extremely important and outmost of interest. In this study, we explore the application of a trimetallic cobalt(II) triazole pyridine bis-[cobalt(III) corrole] complex CoIITP[CoIIIC]2 3 in OER and ORR catalysis due to its remarkable physicochemical properties, fast charge transfer kinetics, electrochemical reversibility, and durability. With nearly 100 % selective catalytic activity towards the two-electron transfer generated H2O2, an ORR onset potential of 0.8 V vs RHE and a cycling stability of 50 000 cycles are detected. Similarly, promising results are obtained when applied in OER catalysis. A relatively low overpotential at 10 mA cm-2 of 412 mV, Faraday efficiency 98 % for oxygen, an outstanding Tafel slope of 64 mV dec-1 combined with superior stability.

High strength paper production based on esterification of thermomechanical pulp fibers in the presence of poly(vinyl alcohol).

Thermomechanical pulp (TMP) fibers, generally used to produce newspapers and carton materials, have poor inter- and intra-fiber bonding contributing to low strength properties. Poly(vinyl alcohol) (PVOH) was applied as a co-additive of 1,2,3,4-butanetetracarboxylic acid (BTCA), in the presence of sodium hypophosphite (SHP) as a catalyst, to esterify paper sheets based on TMP fibers. Fourier transform infrared (FTIR) spectroscopy technique was used to confirm the formation of the ester bond. The effects of curing temperature, molar mass and mass amount of the PVOH on the tensile index were investigated. The increasing of the curing temperature improved further the wet tensile index. The presence of PVOH increased both the dry and the wet tensile index of the paper sheets. The rise of both the molar mass and the mass amount of PVOH improved the tensile index.

Correlation between superhydrophobicity and the power spectral density of randomly rough surfaces.

We show experimentally and analytically that for single-valued, isotropic, homogeneous, randomly rough surfaces consisting of bumps randomly protruding over a continuous background, superhydrophobicity is related to the power spectral density of the surface height, which can be derived from microscopy measurements. More precisely, superhydrophobicity correlates with the third moment of the power spectral density, which is directly related to the notion of Wenzel roughness (i.e., the ratio between the real area of the surface and its projected area). In addition, we explain why randomly rough surfaces with identical root-mean-square roughness values may behave differently with respect to water repellence and why roughness components with wavelength larger than 10 µm are not likely to be of importance or, stated otherwise, why superhydrophobicity often requires a contribution from submicrometer-scale components such as nanoparticles. The analysis developed here also shows that the simple thermodynamic arguments relating superhydrophobicity to an increase in the sample area are valid for this type of surface, and we hope that it will help researchers to fabricate efficient superhydrophobic surfaces based on the rational design of their power spectral density.