RESUMO
Nanostarch is unique in that it is highly soluble, thermally stable, non-toxic and inexpensive. Hence, it is utilized in numerous well-established applications, including drug delivery, cosmetics, textiles, foods, and enhanced oil recovery (EOR). These applications take advantage of the special functions that can be achieved through modifications to the structure and properties of native starch. The most common method for the preparation of nanostarch with a relatively higher crystallinity and stability is acid hydrolysis. Technically, the properties of nanostarch are highly dependent on several factors during the hydrolysis process, such as the acid, concentration of acid, reaction time, reaction temperature, and source of starch. The production of nanostarch with desired properties requires a detailed understanding on each of the factors as they are inevitably affected the physical and chemical properties of nanostarch. Hence, it is vital to incorporate optimization technique into the production process to achieve the full potential of nanostarch. Therefore, the current review comprehensively elaborates on the factors that affect acid hydrolysis as well as the optimization techniques used in the preparation of nanostarch.
Assuntos
Nanopartículas , Amido , Ácidos/química , Hidrólise , Nanopartículas/química , Amido/química , TemperaturaRESUMO
Photocatalytic technology offers powerful virus disinfection in wastewater via oxidative capability with minimum harmful by-products generation. This review paper aims to provide state-of-the-art photocatalytic technology in battling transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in wastewater. Prior to that, the advantages and limitations of the existing conventional and advanced oxidation processes for virus disinfection in water systems were thoroughly examined. A wide spectrum of virus degradation by various photocatalysts was then considered to understand the potential mechanism for deactivating this deadly virus. The challenges and future perspectives were comprehensively discussed at the end of this review describing the limitations of current photocatalytic technology and suggesting a realistic outlook on advanced photocatalytic technology as a potential solution in dealing with similar upcoming pandemics. The major finding of this review including discovery of a vision on the possible photocatalytic approaches that have been proven to be outstanding against other viruses and subsequently combatting SARS-CoV-2 in wastewater. This review intends to deliver insightful information and discussion on the potential of photocatalysis in battling COVID-19 transmission through wastewater.
RESUMO
One of the main problems in direct methanol fuel cell (DMFC) application is methanol crossover. In order to solve the problem, an exfoliated void-free electrospun Sulfonated Poly(Ether Ether Ketone) (SPEEK)/cloisite nanocomposite membrane was developed. The membrane was prepared by immersing electrospun SPEEK/cloisite fiber mats onto incomplete solidified SPEEK polymer matrix. A well dispersed and reduction size of cloisite particles that ranges from 0.29â»0.39 µm was observed by using Scanning Electron Microscopy Analysis (SEM) and Atomic Force Microscope (AFM). The effect of the morphology of the composite membrane in terms of degree of dispersion state of the Cloisite on the membrane performance was discussed. SP/e-spunCL15 with fully exfoliated structure exhibited the highest performance as compared to other tested membranes and Nafion® 115 with current density of 1042.2 mAcm-2 and power density of 1.18 mWcm-2. Improved morphological, dimensional change properties, and performance assigned to well-dispersed cloisite15A induced by the electrospinning technique make the membranes more efficient for direct methanol fuel cell applications.
RESUMO
Void-free electrospun SPEEK/Cloisite15A® densed (SP/e-spunCL) membranes are prepared. Different loadings of Cloisite15A® (0.10, 0.15, 0.20, 0.25 and 0.30 wt %) are incorporated into electrospun fibers. The physico-chemical characteristics (methanol permeability, water uptake and proton conductivity) of the membranes are observed. Thermal stability of all membranes is observed using Thermal Gravimetry Analysis (TGA). The thrree stages of degradation range between 163.1 and 613.1 °C. Differential Scanning Calorimetry (DSC) is used to study the wettability of the membranes. SP/e-spunCL15 shows the lowest freezing bound water of 15.27%, which contributed to the lowest methanol permeability. The non-freezing bound water that proportionally increased with proton conductivity of SP/e-spunCL15 membrane is the highest, 10.60%. It is suggested that the electrospinning as the fabricating method has successfully exfoliated the Cloisite in the membrane surface structure, contributing to the decrease of methanol permeability, while the retained water has led to the enhancement of proton conductivity. This new fabrication method of SP/e-spunCL membrane is said to be a desirable polymer electrolyte membrane for future application in direct methanol fuel cell field.