Evaluation of occlusion types, pain severity, and onset of complaints in 127 patients with temporomandibular disorders: A retrospective study.

Objective: The aims of this study are to evaluate if occlusal types affect the type of temporomandibular disorders and if the onset of complaints are related to the type of internal derangements. Methods: One hundred thirty-four patients were evaluated. Occlusion types were grouped as Angle Class I, II, and III. The temporomandibular disorders were classified as masticatory muscle disorders, anterior disc dislocation with reduction, and anterior disc dislocation without reduction. Results: No significant relationships were found between the occlusion types, pain severity, the onset of the complaints, and the temporomandibular disorders. Premature contacts were found to be significantly higher in Class II and Class III patients, but no significant relations were found between premature contacts and temporomandibular disorders. Discussion: Occlusal features are not discriminant factors in the occurrence of temporomandibular disorders. Also, it cannot be concluded that the longer the patients have temporomandibular disorders, the higher their pain scores will be.

Evaluation of the effects of occlusal splint, trigger point injection and arthrocentesis in the treatment of internal derangement patients with myofascial pain disorders.

PURPOSE: In temporomandibular disorders (TMDs), unless splints are effective, combined therapies are performed. The aim of this study is to show the effectiveness of the local anaesthethic injections (trigger point injections) to the masticatory muscles. MATERIALS AND METHODS: The study was composed of TMD patients and the predictor variables were therapy combinations including stabilization splint (SS) therapy, SS+trigger point injection therapy (TPI) and arthrocentesis. The primary outcome variables were pain and jaw movements. The follow-ups were done at 1st and 3rd months. 56 patients who were treated for TMD with only SS or combined therapies were included in the study. The effects of additional TPIs were compared to SS therapy alone. Also the effect of arthrocentesis was evaluated too. RESULTS: All groups revealed significant decreases in pain scores. Decreases in mouth openings were observed in some of the patients in the injection groups. CONCLUSION: The combined treatment method in which the injections were applied at shorter time intervals, was a more effective method for decreasing VAS scores in TMD patients in this study but further studies are required.

Primary Closure of Oroantral Communication Using Pedicled Buccal Fat Pad Following Maxillary Cyst Enucleation.

Odontogenic keratocyst (OKC) is a clinically aggressive developmental odontogenic cyst with a high recurrence rate as 62%. Oroantral communication (OAC) is a gateway through the maxillary sinus and the oral cavity, which, if not treated, will develop into oroantral fistula or chronical sinus diseases. Different methods for closure of OAC were described but only few of them have common usage. In recent years, the use of a pedicled buccal fat pad (BFP) in closure of large oroantral defects has been become popular. In our patient, the OAC resulted from the surgical removal of OKC was closed with BFP.

Infratemporal fossa infection with inferior alveolar nerve involvement.

Abscess of the infratemporal fossa is a rare complication which can be difficult to diagnose. It occurs mostly due to dental infection, tooth extraction, fractures and/or infections involving the maxillary sinus. This condition can be life threatening if not dealt with immediately. The maxillofacial surgeon must be aware of the symptoms and clinical findings of the infection of the infratemporal fossa in order to initiate the treatment as soon as possible. In this case report, a patient with an infratemporal fossa infection presenting with an unusual symptom of inferior alveolar nerve involvement is presented.

Measurement of the lingual position of the lower third molar roots using cone-beam computed tomography.

PURPOSE: The aim of this study was to evaluate the distance between the roots of the impacted third molars and the floor of the mouth to predict the risk of lingual root displacement during surgery. MATERIALS AND METHODS: Thirty-one patients (5 men and 26 women) were evaluated for this study using cone-beam computed tomography (CBCT). The teeth were grouped according to their position on the orthopantomogram as vertical, mesioangular, horizontal, and distoangular. The distance between 2 points on the roots and lingual soft tissues was measured. RESULTS: The average distance between the apex of the root, which is in the most lingual position, and the lingual cortical plate was 1.03 mm. The average distance between the most lingual point on the apical half of the root, which is in closer proximity, and the lingual cortical plate was 0.65 mm. CONCLUSION: The distance between the apices and the lingual plate is very short, which allows displacement of broken roots or teeth, especially when the lingual plate is perforated.

Effects of hemostatic agents on fibroblast cells.

PURPOSE: Hemostatic agents may be used topically to control hemorrhage, especially in patients with bleeding disorders. The agent used may have a negative effect on the tissue prolonging the healing time. The aim of this study was to compare the effects of 3 different hemostatic agents on fibroblast cells on a rat primary fibroblast cell culture model. MATERIALS AND METHODS: Ankaferd Blood Stopper (ABD) (Ankaferd Pharmaceuticals Cosmetics Production and Marketing Co.), fibrin glue, and tranexamic acid were the agents to be evaluated for their effects on cell proliferation, cell numbers, cell viability, and cell morphology. Also lactate dehydrogenase, basic fibroblast growth factor, and vascular endothelial growth factor C levels were measured. RESULTS: It was found that all of the agents used in the study have negative effects on fibroblasts, with ABD having the lowest values of cell proliferation, cell number, and cell viability. CONCLUSION: The results of this study indicate that ABD, fibrin glue, and tranexamic acid may negatively affect tissue healing.

The effects of pulsed electromagnetic field (PEMF) on osteoblast-like cells cultured on titanium and titanium-zirconium surfaces.

BACKGROUND: Commercially pure Ti, together with Ti Ni, Ti-6Al-4V, and Ti-6Al-7Nb alloys, are among the materials currently being used for this purpose. Titanium-zirconium (TiZr) has been developed that allows SLActive surface modification and that has comparable or better mechanical strength and improved biocompatibility compared with existing Ti alloys. Furthermore, approaches have targeted making the implant surface more hydrophilic, as with the Straumann SLActive surface, a modification of the SLA surface. PURPOSE: The aim of this study is to evaluate the effects of pulsed electromagnetic field (PEMF) to the behavior of neonatal rat calvarial osteoblast-like cells cultured on commercially pure titanium (cpTi) and titanium-zirconium alloy (TiZr) discs with hydrophilic surface properties. MATERIALS AND METHODS: Osteoblast cells were cultured on titanium and TiZr discs, and PEMF was applied. Cell proliferation rates, cell numbers, cell viability rates, alkaline phosphatase, and midkine (MK) levels were measured at 24 and 72 hours. RESULTS: At 24 hours, the number of cells was significantly higher in the TiZr group. At 72 hours, TiZr had a significantly higher number of cells when compared to SLActive, SLActive + PEMF, and machine surface + PEMF groups. At 24 hours, cell proliferation was significantly higher in the TiZr group than SLActive and TiZr + PEMF group. At 72 hours, TiZr group had higher proliferation rate than machine surface and TiZr + PEMF. Cell proliferation in the machine surface group was lower than both SLActive + PEMF and machine surface + PEMF. MK levels of PEMF-treated groups were lower than untreated groups for 72 hours. CONCLUSIONS: Our findings conclude that TiZr surfaces are similar to cpTi surfaces in terms of biocompatibility. However, PEMF application has a higher stimulative effect on cells cultured on cpTi surfaces when compared to TiZr.

CAD/CAM glass ceramics for single-tooth implant crowns: a finite element analysis.

PURPOSE: To evaluate the load distribution of CAD/CAM mono-ceramic crowns supported with single-tooth implants in functional area. MATERIALS AND METHODS: A 3-dimensional numerical model of a soft tissue-level implant was constructed with cement-retained abutment to support glass ceramic machinable crown. Implant-abutment complex and the retained crown were embedded in a Ø 1.5 × 1.5 cm geometric matrix for evaluation of mechanical behavior of mono-ceramic CAD/CAM aluminosilicate and leucite glass crown materials. Laterally positioned axial load of 300 N was applied on the crowns. Resulting principal stresses in the mono-ceramic crowns were evaluated in relation to different glass ceramic materials. RESULTS: The highest compressive stresses were observed at the cervical region of the buccal aspect of the crowns and were 89.98 and 89.99 MPa, for aluminosilicate and leucite glass ceramics, respectively. The highest tensile stresses were observed at the collar of the lingual part of the crowns and were 24.54 and 25.39 MPa, respectively. CONCLUSION: Stresses induced upon 300 N static loading of CAD/CAM aluminosalicate and leucite glass ceramics are below the compressive strength of the materials. Impact loads may actuate the progress to end failure of mono-ceramic crowns supported by metallic implant abutments.

Immediate implant placement without bone grafting: a retrospective study of 110 cases with 5 years of follow-up.

PURPOSE: Immediate implant placement not only reduces the number of surgeries necessary but also decreases the treatment time and treatment costs. The purpose of the study was to present the clinical results of 110 cases of immediate implant placement without using graft materials at the end of 5 years. MATERIALS AND METHODS: One hundred and ten implants in 72 patients were included in the study. Inclusion criteria for the patients were presence of at least 2 mm of bone beyond the root apex, the absence of acute signs of infection or inflammation in the treatment area, and the absence of systemic pathologies that would contraindicate bone healing around implants. In cases where bone grafting was necessary, the implant was excluded from the study. RESULTS: Healing progressed uneventfully in 105 cases. Four implants were lost as a result of infection in the first 3 months and 1 implant was lost 1 year after the functional loading of the prosthesis. The soft tissue anatomy was clinically acceptable in all patients. The implants that were placed in the extraction sockets of infectious teeth had also acceptable survival rates and clinical success. CONCLUSION: With proper patient selection, immediate implant placement without bone grafting has predictable survival rates and clinical success.

Low-level laser therapy vs. pulsed electromagnetic field on neonatal rat calvarial osteoblast-like cells.

To compare the effects of pulsed electromagnetic field (PEMF) and low-level laser therapy (LLLT) on osteoblast cells in a cell culture model. Fifty thousand neonatal rat calvarial osteoblast-like cells per milliliter were seeded and 0.06 mT PEMF, 0.2 mT PEMF, and LLLT at 808 nm were applied for 24 and 96 h on the cells. To evaluate cellular proliferation and differentiation, specimens were examined for DNA synthesis, alkaline phosphatase (ALP) activity, cell numbers, and viability of the cells. Morphological appearances of the cells were observed using scanning electron microcopy after 24 and 96 h of incubation. At 24 and 96 h, the control group had a higher cell proliferation than 0.06 and 0.2 mT PEMF groups (p=0.001). At 96 h, 0.2 mT PEMF group had higher cell proliferation rate than 0.06 mT PEMF and LLLT groups (p=0.001). The cell count and cell viability in 0.2 mT PEMF group were higher than the 0.06-mT PEMF and LLLT groups, although these differences were not statistically significant at 96 h (p>0.05). At 24 and 96 h, cell viability in the control group was higher than the test groups. Alkaline phosphatase levels of the groups were comparable in both time intervals (p>0.05). 0.2 mT PEMF application on osteoblast-like cells led to cell proliferation and differentiation better than 0.06 mT PEMF and LLLT at 808 nm, although a remarkable effect of both PEMF and LLLT could not be detected. The ALP activity of 0.2 and 0.06 mT PEMF and LLLT were comparable.

Traumatic bone cyst mimicking radicular cyst.

Traumatic bone cysts were first defined by Lucas and Blum in 1929. It is classified as an intraosseous pseudocyst. They are asymptomatic and are usually seen during routine radiographical examination. According to the 2002 classification of the WHO, traumatic bone cysts are in miscellaneous lesions. This report describes a 16-year-old male patient who had a traumatic bone cyst that mimicked a radicular cyst.

Evaluation of light-emitting diode (LED-660 nm) application over primary osteoblast-like cells on titanium surfaces: an in vitro study.

BACKGROUND: The goal of this study was to evaluate the behavior of neonatal rat calvarial osteoblast-like cells cultured on different implant surfaces and exposed once or three times to a 660-nm light-emitting diode (LED). METHODS: An LED with a 660-nm wavelength was applied once or three times to cultured cells on standard and modified sandblasted acid-etched surfaces (SLA and SLActive; Straumann, Basel, Switzerland). To analyze the effect of the LED on cell proliferation, numbers, and viability, cells were cultured on titanium discs, and measurements were taken after 72 h. Cell proliferation rates were assessed using a bromodeoxyuridine immunohistochemical technique. Cell morphologies were evaluated by scanning electron microscopy (SEM). RESULTS: Osteoblast-like cells proliferated on all tested surfaces, with differences among groups in cell counts and DNA synthesis values. The application of one LED treatment caused a significant increase in cell count in the SLActive group in comparison with the SLA group (p = 0.001), whereas the application of three LED treatments caused a significant decrease in cell count in the SLA group compared with the SLActive group (p < 0.001). After 72 h, the number of cells was highest in the SLActive group exposed once to the LED. CONCLUSIONS: One LED application in the SLActive group resulted in significantly increased cell numbers. However, these findings were not exactly compatible with the SEM findings, which demonstrated fewer cells and weak attachments between cells and to the surface. Thus, further studies using different LED application times are needed to clarify the reason for the increased number of cells that are apparently incapable of attaching to the titanium surfaces after 72 h.

Bisphosphonate-related osteonecrosis: laser-assisted surgical treatment or conventional surgery?

Bisphosphonates (BSPs) are used for the treatment of multiple myeloma, metastatic breast and lung cancer, Paget's disease, osteoporosis, hypercalcemia due to malignancy, and many other skeletal diseases. BSPs reduce osteoclastic functions, which result in bone resorption. Bisphosphonates-related osteonecrosis of jaws (BRONJ) is a newly developed term that is used to describe the significant complication in patients receiving bisphosphonates. BSPs are known to exhibit an anti-angiogenetic effect that initiates tissue necrosis of the hard tissue. There is currently no consensus on the correct approach to this issue. The aim of this retrospective study is to compare the effects of laser surgery with biostimulation to conventional surgery in the treatment of BSP-induced avascular bone necrosis on 20 patients who have been treated in our clinic. BRONJ was evaluated in patients with lung, prostate, and breast cancer under intravenous BSP treatment. Twenty patients in this study developed mandibular or maxillary avascular necrosis after a minor tooth extraction surgery or spontaneously. Bone turnover rates were evaluated by serum terminal C-telopeptide levels (CTX) using the electrochemiluminescence immunoassay technique and patients were treated with laser or conventional surgical treatments and medical therapy. Ten patients were treated with laser surgery and biostimulation. An Er:YAG laser (Fotona Fidelis Plus II® Combine laser equipment, Slovenia) very long pulse (VLP) mode (200 mJ, 20 Hz) using a fiber tip 1.3 mm in diameter and 12 mm in length was used to remove the necrotic and granulation tissues from the area of avascular necrosis. Biostimulation was applied postoperatively using an Nd:YAG laser. Low-level laser therapy (LLLT) was applied to the tissues for 1 min from 4 cm distance using an Nd:YAG laser (Fotona-Slovenia) with a R24 950-µm fiber handpiece long-pulse (LP) mode, 0.25-W, 10 Hz power/cm(2) from the mentioned distance the spot size was 0.4 cm(2), and power output was 2.5 J. Energy density from the mentioned distance was calculated to be 6.25 J/cm(2). The other ten patients were treated with conventional surgery. Treatment outcomes were noted as either complete healing or incomplete healing. There were no statistically significant differences between laser surgery and conventional surgery (p > 0.05). CTX values also did not affect the prognosis of the patients. Treatment outcomes were significantly better in patients with stage II osteonecrosis than in patients with stage I osteonecrosis. Our findings suggest that dental evaluation of the patients prior to medication is an important factor in the prevention of BRONJ. Laser surgery is a beneficial alternative in the treatment of patients with this situation. Further randomized studies with larger patient numbers may also improve our understanding of treatment protocols for this situation.

Effects of bone morphogenetic proteins on osteoblast cells: vascular endothelial growth factor, calcium, inorganic phosphate, and nitric oxide levels.

PURPOSE: Bone morphogenetic proteins (BMPs) play an important role in the initiation of bone formation by affecting cell growth and differentiation in a variety of cell types including osteoblasts. Vascular endothelial growth factor (VEGF) is an important regulator of angiogenesis and vasculogenesis, and also, VEGF signaling is important for skeletal development. Nitric oxide (NO), calcium (Ca), and inorganic Phosphate (Pi) are important molecules for cell functions. In this study, the effects of BMP on VEGF, Ca, NO, and Pi levels were investigated in an osteoblast cell culture. MATERIALS: Fifty thousand cells per milliliter were seeded and cultured on graft materials for 24 and 48 hours. Different concentrations of BMPs (combination of BMPs numbered from 1 to 14) were supplemented to the medium. RESULTS: BMP was found to increase VEGF (P = 0.00), Ca (P = 0.02), and Pi (P = 0.00) especially in the first 24 hours. The increase in the NO in the experimental groups were found to be statistically insignificant (P = 0.12). CONCLUSION: Our data state that further investigation should be performed on the effects of BMPs on osteoblast cell membranes and membrane receptors and cell signaling, together with their known effects on early phases of bone and vascular epithelial tissue formation.

A technique for atraumatic extraction of teeth before immediate implant placement using implant drills.

PURPOSE: The purpose of this article is to present a minimally invasive technique using the implant drills to help extract teeth before the insertion of immediate implants. MATERIALS AND METHODS: Nine patients (7 women and 2 men) aged 24 to 60 years having root fractures and dental caries were included in this study. Inclusion criteria for the study were presence of at least 4 mm of bone beyond the root apex, the absence of acute signs of infection or inflammation in the treatment area, and the absence of systemic pathologies that would contraindicate bone healing around implants. Heavy smokers were not included in the study. Extraction was done after thinning the root walls by the help of the implant drills. After extraction, implant sites were prepared and implants were inserted. In 2 of the cases, the peri-implant bone defect was filled with autogenous bone graft. RESULTS: Healing progressed uneventfully in all 9 cases. The use of implant drills to thin the root walls provided atraumatic tooth extraction protecting the thin buccal bone. At second stage surgery, all implants were asymptomatic, immobile, and osseointegrated. The soft tissue anatomy was clinically acceptable in all patients. Radiographic examination of all 9 implants showed no peri-implant radiolucency at the end of a year. CONCLUSION: Successful osseointegration and complete bone healing were observed for all patients. The new extraction technique was found to be effective in immediate implant cases in order not to damage the thin plate of buccal bone.

Management of a mandibular fracture accompanying a gunshot wound.

Gunshot injuries of the mandible can result in high rates of complications, especially in cases of bone loss. A fractured mandible accompanying a gunshot wound almost always has an external wound; the fracture is always compound and comminuted. Sometimes management of these injuries may require multiple surgical interventions. In this clinical report, treatment of a patient, who had a mandibular fracture due to a gunshot wound, is presented.A 52-year-old man with a mandibular fracture in the right mandibular body accompanying a gunshot wound was operated on. Owing to a nonunion, a second surgery was performed using reconstruction plates after hyperbaric oxygen treatment. Healing was uneventful after the second surgical intervention.

The influence of titanium surfaces in cultures of neonatal rat calvarial osteoblast-like cells: an immunohistochemical study.

BACKGROUND: The goal of this present study was to evaluate the behavior of neonatal rat calvarial osteoblast-like cells cultured on different implant surfaces. MATERIALS: Sandblasted acid-etched (SLA) surfaces of 2 different companies with different alloy properties were used. These were named as SLA-1 and SLA-2. The osteoblasts behavior were analyzed on sand blasted-acid etched (SLA-1) surface (Straumann, Basel, Switzerland), sand blasted-acid etched (SLA-2) surface (Alpha bio, Petach-tikva, Israel), acid-etched surface (Alpha bio), machined surface (Alpha bio). To analyze the effect of titanium surfaces on cell proliferation, cell numbers, and cell viability cells were cultured on titanium discs for 7 days and measurements were held out at 24 hours and on day 7. Cell proliferation rate was assessed by bromodeoxyuridine (BrdU) immunohistochemical technique. Cell morphologies were evaluated by scanning electron microscopy. RESULTS: The highest number of BrdU labeled cells were seen on SLA-1 group at the end of 24 hours. The number of cells was found to be the highest in the acid-etched group on the 7th day, even though there were no significant differences between the groups at the end of 24 hours. Scanning electron microscopy views showed the morphological differences between the groups. Osteoblasts were able to proliferate on all of the tested surfaces, with differences in cell count and DNA synthesis values between the groups. CONCLUSION: Implant surface characteristics may modulate the biological response of osteoblast-like cells depending on the manufacturing techniques and cell culturing procedures.

Effects of bone morphogenetic protein on neonatal rat calvarial osteoblast-like cells: an in vitro study.

Bone morphogenetic proteins (BMPs) are factors that promote osteoblastic differentiation and osteogenesis. The aim of this study was to examine the behavior of neonatal rat calvarial osteoblast cells cultured on different concentrations of BMP graft materials. Fifty thousand cells per milliliter were seeded and cultured on graft materials for 24 and 48 h. Different concentrations of BMPs (combination of BMPs numbered from 1 to 14) were supplemented to the medium. To evaluate cellular proliferation and differentiation, specimens were examined for DNA synthesis, alkaline phosphatase (ALP) activity, cell numbers, and viability of the cells. Further, transforming growth factor-beta(1) (TGF-beta(1)) and lactate dehydrogenase (LDH) levels were investigated. Morphological appearance of the specimens at 24 and 48 h of incubation was evaluated using scanning electron microcopy. Evaluations of DNA synthesis, cell count, and cell viability data revealed that a significant difference existed at 24 and 48 h (p < 0.05). The TGF-beta(1) and ALP analysis showed only a significant difference between the groups at the end of 24 h (p < 0.05). Regarding the lactate dehydrogenase activity there was not any significant difference at 24 and 48 h (p > 0.05). No morphological differences were observed in cell morphology on BMP graft material and the control group. These results indicate that BMPs have an inductive effect on osteoblast differentiation and a possible inhibitory effect in the early phases of cell proliferation.

Biocompatibility of different barrier membranes in cultures of human CRL 11372 osteoblast-like cells: an immunohistochemical study.

OBJECTIVE: The aim of this study was to evaluate the biocompatibility of two different barrier materials in cultures of human osteoblast-like cells (CRL 11372) in vitro. MATERIAL AND METHODS: Polylactic acid (Epi-Guide; EG) and collagen membrane (Bio-Collagen, BC) were examined. To analyze the effect of materials on cell proliferation, cell numbers and cell viability, cells were cultured on the barrier membranes for 24 and 72 h. Cells plated on culture dishes (CD) served as positive controls. Cell proliferation rate was assessed by the bromodeoxyuridine (BrdU) immunohistochemical technique. The cell numbers of each well were counted. Cell viability was estimated by counting the number of cells, which excluded trypan blue solution. Scanning electron microscopy (SEM) was used to observe the interactions between osteoblastic cells and barrier membranes. RESULTS: The highest number of BrdU-labeled cells were seen on CD after both of the time periods. In comparison with the other two groups, BC showed significantly fewer cells after both time periods. Regarding cell numbers, after 24 and 72 h of incubations CD showed the highest number of cells. The number of viable cells was similar for all the groups. After 72 h for the EG group, SEM view showed flat cells. After 72-h time periods, the BC group revealed a weak adhesion of cells to the barriers. CONCLUSION: The results demonstrate that cells were able to proliferate on these materials and EG promoted the proliferation of human osteoblast like cells. We prefer to use the EG membrane.

The effects of naproxen sodium on specific parameters of L-strain cells over guided bone regeneration barrier materials.

There is strong evidence that nonsteroidal antiinflammatory drugs (NSAID) may exert a significant antiproliferative effect. This study evaluated the influence of NSAID on specific parameters of fibroblastic cells, in vitro, over two-guided bone regeneration (GBR) barrier materials. Fibroblast cells were cultured on bioabsorbable membrane made of collagen (Bio-Gide(R)- BG) and the most common nonresorbable membrane which is made of expanded polytetrafluoroethylene (ePTFE, Gore-Tex(R)- GT). Naproxen sodium (10 mM) was used as an analgesic drug. The fibroblast cells were cultured in vitro for 24 h and examined by scanning electron microscopy (SEM). Cells were cultured in the presence of (3)H-thymidine to study cell proliferation. And also cell numbers and viabilities were measured. The difference between the means for each group were analyzed for statistical significance by Kruskal-Wallis one-way ANOVA followed by post hoc comparisons using the Dunn statistical method. Of all the six groups, the control group stimulated DNA synthesis more than the others. With respect to cell numbers, there was statistically significant difference between the control group and naproxen planted BG membrane group. The interpretation of our SEM images is that these two barriers and naproxen seem to have had the least effect on cellular morphology. These data suggest naproxen have an inhibitory effect on stimulation of DNA synthesis, cell numbers and viabilities. And also lacking adherence of cells to the membranes may be due to the physical properties of the materials.