Inhalation of multi-wall carbon nanotubes changes the expression of apoptosis and cancer genes in rat brain and lungs.

One of the important issues in urban areas is air pollution which causes respiratory disorders. A significant association between exposure to inhaled particulate matter (PM), mainly ultrafine particles, and increased neurological and pulmonary morbidity and mortality was observed in some research. This study aimed to demonstrate the relation between multi-wall carbon nanotubes (MWCNTs) inhalation and the carcinogenic effect of these materials in the brain and lungs. For this purpose, we investigated gene expression in rat brain and lung tissues induced by exposure to MWCNTs. Rats were exposed to MWCNTs in diameters of 10 and 100 nm (pure and impure) at a concentration of 5 mg/m3. Exposure was done through a whole-body exposure chamber for 5 h/day, 5 days/week for 14 days. After exposure, both brain and lung tissues were isolated to evaluate certain gene expressions including Bax, Bcl2, Rac1, Tp53, Mmp12, and Arc. The results showed that exposure to impure and pure MWCNTs (10 and 100 nm) at a concentration of 5 mg/m3 causes up-regulation or down-regulation of some of these genes. The results suggest that impure and pure MWCNTs (10 and 100 nm) can increase the risk of central nervous system disorders such as Alzheimer's disease and increase the risk of carcinogenesis in the lung tissues of rats exposed to MWCNTs (Tab. 2, Fig. 2, Ref. 64). Text in PDF www.elis.sk Keywords: multi-wall carbon nanotube, inhalation, gene expression, carcinogenicity, brain, lung.

Cytotoxic effects of crystalline silica in form of micro and nanoparticles on the human lung cell line A549.

Airborne crystalline silica (SiO2) particles are one of the most common pollutants in stone industries. Limited studies have investigated the health effects of crystalline SiO2 nanoparticles. Hence, the objective of this study was to study the cytotoxicity of SiO2 in nano and micron sizes. A mineral quartz sample in the range of 0.2-0.8 mm sizes was purchased. These particles were ground at about 5 and 0.1 microns. Human cell line A549 was exposed to micro and nanometer particles at concentrations of 10, 50, 100, and 250 µg/ml for 24 and 72 h. Subsequently, the cytotoxicity of exposed cells was investigated by measuring cell survival, ROS generation, mitochondrial permeability, and intracellular glutathione content. The results showed that crystalline SiO2 nano and microparticles decreased cell survival, increased ROS generation, damaged the mitochondrial membrane, and lowered the antioxidant content of these cells in a concentration- and time-dependent manner. The toxicity of crystalline SiO2 microparticles at concentrations ≤50 µg/mL was greater than for nanoparticles, which was the opposite at concentrations ≥100 µg/mL. Exposure time and concentration were crucial factors for the cytotoxicity of exposed A549 cells to crystalline SiO2 particles, which can affect the severity of the effect of particle size. Due to the limitation of exposure concentration and test durations in this study, further studies on the parameters of nanoparticle toxicity and underlying mechanisms could advance our knowledge.

Toxicity of Carbon-Based Nanomaterials in the Human Lung: A Comparative In-Vitro Study.

Background: Carbon-based nanomaterials (CBNs) are the key elements in nanotechnology. The main challenge presented by CBNs is their relationship with the toxicity exposed in the biological systems, because of the incomplete information on their toxicity. This study is aimed to compare the cytotoxicity of graphite nanoparticles (GRNPs), graphene nanoparticles (GNPs), and multi-walled carbon nanotubes (MWCNTs) in A549 cells. Materials and Methods: The physicochemical properties of nanomaterials were determined by instrumental techniques. CBNs were dispersed by the nongenotoxic standard procedure. After the cells were cultured, they were exposed to different concentrations of CBNs. Cellular viability was determined by the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) method. Moreover, toxicological indicators were obtained using linear probit regression. Results: The degree of cytotoxicity of CBNs in A549 cells was related to the time and, particularly, dose. At the concentrations of lower than 300 µg/mL, GNPs had stronger toxicity than MWCNTs, but the cytotoxic effects were reversed with the increase of the concentrations. The no-observed-adverse-effect concentration (NOAEC) of GRNPs, GNPs, and MWCNTs was 1.76, 0.06, and 0.65 µg/mL, respectively. Conclusion: The results indicated that CBNs were toxic and GNPs had stronger toxicity than the others. The experimental results can be useful in increasing the knowledge about the toxicity and health risk management of CBNs.

Interactive toxicity effect of combined exposure to hematite and amorphous silicon dioxide nanoparticles in human A549 cell line.

The study on the health effects of combined exposure to various contaminants has been recommended by many authors. The objective of the present study was to examine the effects of the co-exposure to hematite and amorphous silicon dioxide (A-SiO2) nanoparticles on the human lung A549 cell line. The A549 cell line was exposed to 10, 50, 100, and 250 µg/ml concentrations of hematite and A-SiO2 nanoparticles both independently and in combination. Their toxicity in both circumstances was investigated by MTT, intracellular reactive oxygen species, cell glutathione content, and mitochondrial membrane potential tests, and the type of interaction was investigated by statistical analysis using Statistical Package for Social Sciences (SPSS, v. 21). Results showed that the independent exposure to either hematite or A-SiO2 compared with the control group produced more toxic effects on the A549 cell line. The toxicity of combined exposure of the nanoparticles was lower compared with independent exposure, and antagonistic interactive effects were detected. The findings of this study could be useful in clarifying the present debate on the health effects of combined exposure of hematite and A-SiO2 nanoparticles. Because of the complexities of combined exposures, further studies of this kind are recommended.

Apigenin ameliorates oxidative stress and mitochondrial damage induced by multiwall carbon nanotubes in rat kidney mitochondria.

The toxicity of carbon nanotubes (CNTs) toward the mitochondria of the kidney is not fully recognized and still needs further research. Apigenin (APG) is known as a flavonoid compound and natural antioxidant. The purpose of this study was to assess the ameliorative role of APG against multiwall CNT (MWCNT)-induced kidney toxicity in rats. The animals were administrated with APG (10 mg/kg) for 2 weeks and then were exposed to MWCNTs (5 mg/m3 ) in pure and impure forms (10 and 100 nm) for 5 h/day and 5 days/week. Then, mitochondria were isolated from the kidney tissue and mitochondrial toxicity parameters were measured. Decreases in succinate dehydrogenase activity have been reported in all groups exposed to MWCNTs. Results indicated that MWCNTs in both forms and sizes were able to increase the generation of reactive oxygen species, decline mitochondrial membrane potential, induce mitochondrial swelling, and release cytochrome c in isolated kidney mitochondria. The pretreatment of APG decreased all the abovementioned mitochondrial damage and oxidative stress parameters induced by both pure and impure MWCNTs. Our results showed that MWCNTs have the ability to enter the body, subsequently, cross cellular barriers, and reach the kidney as a sensitive organ, which can result in mitochondrial damage in kidney cells including renal tubular cells. In addition, APG can be an effective nutritional antioxidant regimen against MWCNT-induced kidney damage.

CFD simulation for dispersion of benzene at a petroleum refinery in diverse atmospheric conditions.

Atmospheric parameters play a vital role in the dispersion of air pollutants. Benzene is a confirmed human carcinogen. It is also a neurotoxin and an irritant compound. The objective of this study was to examine the CFD simulation by Fluent16 software to simulate and analyze the effect of atmospheric conditions on the dispersion of benzene in eight different scenarios in a petroleum refinery. According to the results of this study, the highest and lowest impacts of atmospheric parameters occurred on spring days and autumn nights, respectively. Wind direction did not have a significant effect on the benzene distribution due to the artificial ceiling of piping installations in the computational domain. However, the wind speed had a critical role in the benzene dispersion. The maximum concentration occurred at 36- to 37-m distance from the inlet boundary for all scenarios except winter nights. On winter nights, this distance increased to 38 m. Benzene concentrations were the highest at their sources of release. They decreased after the artificial ceiling of the pipelines was at 5.5- to 7-m height where the air displacement was not sufficient, and therefore, leading to a gradual reduction in concentration. The accumulation of benzene concentration in the small domain was noticeable compared to the benzene concentration distributed in the total computational domain, and the authors recommended control measures in this domain. This study demonstrated CFD simulation methodology could enable the investigators to predict the benzene concentration dispersion in the atmosphere of a petroleum refinery plant. These findings can be used by occupational health engineers for health risk assessment of refinery personnel involved with maintenance operations and engineering control systems.

The Effect of Particle Size on the Cytotoxicity of Amorphous Silicon Dioxide: An in Vitro Toxicological Study.

INTRODUCTION: Amorphous silicon dioxide (A-SiO2) is abundant in the Earth's crust, the A-SiO2 nano and microparticles are released into the air through industrial and manufacturing activities. Due to the limited available toxicological information, the objective of the present study was to evaluate the toxicity of different sizes of A-SiO2 particles on the A549 cell-lines in an in vitro study. MATERIALS AND METHODS: The A-SiO2 particles in two categories of nano (10-100 nm) and micro (< 5um) were used in this study. The human lung A549 cell-line was exposed to either nano- or micro-sized A-SiO2 particles at 10, 50, 100, and 250 µg/ml, and the effects were investigated. RESULTS: The cytotoxicity of A-SiO2 nano and microparticles in both 24- and 72-hour exposure times resulted in decreased cell survival, mitochondrial membrane potential, and increased ROS generation which was concentration-time dependent (P <0.05) but glutathione content was not affected in a time-dependent manner. Cytotoxicity of nanoparticles, contrary to the previous study, was not higher than microparticles in the comparable dose and exposure times. CONCLUSION: The rate of ROS generation in the A549 cell-line exposed to A-SiO2 nanoparticles was higher than microparticles. And at the same time, cell survival for exposed cells to A-SiO2 nano and microparticles were higher for nanoparticles in shorter exposure periods and was inversely concentration- and time-dependent. Further studies on exploring the effect of size and its possible toxic mechanism are recommended to achieve a more credible risk assessment.

Comparing in vitro cytotoxicity of graphite, short multi-walled carbon nanotubes, and long multi-walled carbon nanotubes.

Occupational and environmental exposures to carbon-based materials in nano- and micro-size have been reported. There is incomplete information on the impact of size on the toxicity of carbon-based materials. The objective of this study is to compare the toxicity of graphite, short multi-walled carbon nanotubes (S-MWCNTs), and long multi-walled carbon nanotubes (L-MWCNTs) in lung cells (A 549). The physicochemical properties of MWCNTs were determined using analytical instruments. The fibers of MWCNTs were dispersed in the sterile-filtered 0.05% bovine serum albumin in MilliQ water. Cytotoxicity of graphite and MWCNTs were assessed using the cell viability, reactive oxygen species (ROS), and lipid peroxidation experiments. Results showed that MWCNTs induced cytotoxicity through the generation of oxidative stress in the exposed lung cells. Mean cytotoxicity of S-MWCNTs was statistically more than that of L-MWCNTs. The graphite induced cytotoxicity only at high concentrations. The mean cytotoxicity of both S-MWCNTs and L-MWCNTs was statistically more than that of graphite. The results also indicated that oxidative stress was the probable toxicity mechanism of carbon-based materials. The decreasing size of carbon-based materials could increase their toxicity. Because of the toxicity of MWCNTs, it is imperative to consider health and safety issues in working with nanomaterials.

Additive toxicity of Co-exposure to pristine multi-walled carbon nanotubes and benzo α pyrene in lung cells.

The Mixture exposure to pristine multi-walled carbon nanotubes (P-MWCNTs) and polycyclic aromatic hydrocarbons (PAHs) such as benzo α pyrene (BaP) in the environment is inevitable. Assessment toxicity of P-MWCNTs and BaP individually may not provide sufficient toxicological information. The objective of this work is to investigate the combined toxicity of P-MWCNTs and BaP in human epithelial lung cells (A549). The physico-chemical properties of P-MWCNTs were determined suing analytical instruments. The toxicity of P-MWCNTs and BaP on A549 lung cells individually or combined were assessed. For toxicity assessment, cell viability, ROS generation, oxidative DNA damage, and apoptosis experiments were conducted. The results of this study demonstrated that P-MWCNTs and BaP individually reduced cell viability in A549 lung cells, and oxidative stress was as the possible mechanism of cytotoxicity. The co-exposure to P-MWCNTs and BaP enhanced the cytotoxicity compared to exposure to P-MWCNTs and BaP individually, but not statistically significant. The two-factorial analysis demonstrated an additive toxicity interaction for co-exposure to P-MWCNTs and BaP. The complicated toxicity interaction among BaP with fibers and metal impurities of P-MWCNTS could be probable reasons for additive toxicity interaction. Results of this study could be helpful as the basis for future studies and risk assessment of co-exposure to MWCNTs and PAHs.

Investigation of the effect of magnetite iron oxide particles size on cytotoxicity in A549 cell line.

INTRODUCTION: Magnetite as iron oxide is widely used in various industries, in the pharmaceutical industry in particular where it is used for its magnetic properties. The environmental and occupational exposure to airborne nanoparticles and microparticles of iron oxide compounds have been reported. Since authors have reported contradictory results, the objective of this study was to investigate the effect of particles' size in their toxicities. METHODS: The human cell line A549 was exposed with magnetite iron oxide in two size categories of micro (≥5 µm) and nano (<100 nm), with four concentrations of 10, 50, 100, and 250 µg/ml at two time periods of 24 and 72 h. The cell viability, reactive oxygen species (ROS), changes in mitochondrial membrane potential, and incidence of apoptosis were studied. RESULTS: Nano and micro magnetite particles demonstrated diverse toxicity effects on the A549 cell line at the 24- and 72-h exposure periods; however, the effects produced were time- and concentration-dependent. Nano magnetite particles produced greater cellular toxicities in forms of decreased viabilities at concentration exposures greater than 50 µg/ml (p < 0.05), along with increased ROS (p < 0.05), decreased cellular membrane potential (p < 0.05), and reduced rate of apoptosis (p < 0.05). DISCUSSION: The results of this study demonstrated that magnetite iron in nano-range sizes had a greater absorbability for the A549 cell line compared to micro sizes, and at the same time, nanoparticles were more toxic than microparticles, demonstrating higher production of ROS and decreased viabilities. Considering the greater toxicity of nanoparticles of magnetite iron in this study, thorough precautionary control measures must be taken before they can be used in various industries.

The effect of single and combined exposures to magnetite and polymorphous silicon dioxide nanoparticles on the human A549 cell line: in vitro study.

The increasing trend of nanoparticle usage in science and technology has led to significant human exposure. Occupational exposure to iron oxides and silica dust has been reported in mining, manufacturing, construction, and pharmaceutical operations. The combined toxicological effects of nanoparticles and simultaneous exposure to other compounds have given rise to a new concern. Hence, the objective of this study was to investigate the toxicological effects of magnetite and polymorphous silicon dioxide nanoparticles in single and combined exposures. The polymorphous silicon dioxide nanoparticles were obtained from the milled quartz particles under 100 nm in diameter. The milled particles were purified through chloric and nitric acid wash processes. The toxic effects of the magnetite nanoparticles were investigated independently and in combination with quartz using the A549 cell line for durations of 24 and 72 h, and using diverse concentrations of 10, 50, 100, and 250 µg/mL. MTT, ROS, mitochondrial membrane potential, and cell glutathione content assays were used to evaluate the amount of cell damage in this study. The statistical significance level in one-way ANOVA and independent t test was considered to be at the 5% confidence level. The size and purity of polymorphous silicon dioxide nanoparticles were measured by TEM and ICP-OES analysis, respectively. The particles' diameters were under 100 nm and demonstrated a purity of higher than 99%. The toxicity results of this study showed a dependency on concentration and exposure duration in reducing the cell viability, cellular glutathione content, and mitochondrial membrane potential, as well as increasing the ROS generation in single and combined exposures with magnetite and polymorphous silicon dioxide nanoparticles. The toxic effects of combined exposure to these nanoparticles were less than the single exposures, and statistically significant antagonistic interactions were detected. Combined exposure to polymorphous silicon dioxide and magnetite nanoparticles, in comparison with their single exposures, could affect health in an antagonistic manner. Since this study has been the first of its kind, further studies investigating the health effects of single and combined exposures to these compounds are needed to verify our findings. Generally, studies such as this one could contribute to the field of combined toxicity effects.

Antagonistic effect of co-exposure to short-multiwalled carbon nanotubes and benzo[a]pyrene in human lung cells (A549).

In theenvironment, co-exposure to short-multiwalled carbon nanotubes (S-MWCNTs) and polycyclic aromatic compounds (PAHs) has been reported. In the co-exposure condition, the adsorption of PAHs onto MWCNTs may reduce PAHs toxic effect. The objective of this study was to investigate the cytotoxicity of S-MWCNTs and benzo[a]pyrene (B[a]P) individually, and in combination in human lung cell lines (A549). The adsorption of B[a]P onto MWCNTs was measured spectrometrically. In vitro toxicity was assessed through cell viability, reactive oxygen species (ROS) generation, apoptosis, and 8-hydroxy-2'-deoxyguanosine (8-OHdG) generation experiments. The S-MWCNTs demonstrated cytotoxicity through the generation of ROS, apoptosis, and 8-OHdG in A549 cells. Co-exposure to S-MWCNTs and B[a]P demonstrated a significant reduction in ROS generation and apoptosis compared with the sum of their separate toxic effects at the same concentrations. Decreasing the bioavailability of B[a]P by MWCNT interaction is the probable reason for the antagonistic effects of the co-exposure condition. The findings of this study will contribute to a better understanding of the health effects of co-exposures to air pollutants and could be a starting point for modifying future health risk assessments.

Neurological risk assessment of co-exposure to heavy metals (chromium and nickel) in chromium-electroplating workers.

BACKGROUND: Metal co-exposure of human subjects is an important matter of public health concern. It has been shown that Acetylcholinesterase activity is a suitable biomarker for the neurological risk assessment of some metals. A few studies have reported neurotoxicity risk among humans in co-exposure to chromium and nickel. OBJECTIVE: In this study, AChE activity was assessed in occupational exposure to chromium (VI) and co-exposure to nickel (II) and chromium (VI). METHODS: Air sampling was done in chromium electroplating workshops with the NIOSH 7600 and OSHA ID-121 methods for chromium and nickel assessment. Thirty-two workers from hard chromium plating and 30 from decorative chromium plating were evaluated, while AChE activity was measured by the Elman method. RESULTS: Personal exposure to chromium in 20% of the studied people exceeded the TWA set by ACGIH. Occupational exposure to nickel in 47% of the DCP subjects was found to be higher than TWA. Cholinergic inhibition in plating workers was marked by a decrease in AChE compared to controls. Subjects with chromium (VI) exposure contained significantly higher inhibition of AChE activity (p < 0.001) than workers with co-exposure to nickel (II) and chromium (VI). CONCLUSIONS: The chromium-matched electroplaters have no significant difference in AChE activity. It can be concluded that cholinergic inhibition with chromium (VI) is higher than nickel (II) exposure.

Individual and combined toxicity of carboxylic acid functionalized multi-walled carbon nanotubes and benzo a pyrene in lung adenocarcinoma cells.

Co-exposure to carboxylic acid functionalized multi-walled carbon nanotubes (F-MWCNTs) and polycyclic aromatic hydrocarbons (PAHs) such as benzo a pyrene (BaP) in ambient air have been reported. Adsorption of BaP to F-MWCNTs can influence combined toxicity. Studying individual toxicity of F-MWCNTs and BaP might give unrealistic data. Limited information is available on the combined toxicity of F-MWCNTs and BaP in human cells. The objective of the present work is to evaluate the toxicity of F-MWCNTs and BaP individually and combined in human lung adenocarcinoma (A549 cells). The in vitro toxicity is evaluated through cell viability, the production of reactive oxygen species (ROS), apoptosis, and the production of 8-OHdG assays. Adsorption of BaP to F-MWCNTs was confirmed using a spectrophotometer. The results indicated that the F-MWCNTs and BaP reduce cell viability individually and produce ROS, apoptosis, and 8-OHdG in exposed cells. Stress oxidative is found to be a mechanism of cytotoxicity for both F-MWCNTs and BaP. Combined exposure to F-MWCNTs and BaP decreases cytotoxicity compared to individual exposure, but the difference is not statistically significant in all toxicity assays; hence, the two-factorial analysis indicated an additive toxic interaction. Adsorption of BaP to F-MWCNTs could mitigate the bioavailability and toxicity of BaP in biological systems. Considering the mixture toxicity of MWCNTs and BaP is required for risk assessment of ambient air contaminants.

Occupational Exposure to Respirable Dust, Crystalline Silica and Its Pulmonary Effects among Workers of a Cement Factory in Kermanshah, Iran.

BACKGROUND: Although the main hazard in cement processing is dust, and its effects on pulmonary function constitute the most important group of occupational diseases in this industry, evidence for association between exposure to cement dust and pulmonary function has not been conclusive. This study was performed with the aim to evaluate the impact of cement dust in the workplace on decreasing pulmonary function parameters among the workers. MATERIALS AND METHODS: In this cross-sectional study 283 workers were studied, of which 140 workers were considered as exposed group and 143 workers as non-exposed group. Fifty samples of respirable dust were collected from breathing zone of workers in different sections of cement factory. Visible absorption spectrophotometry was used according to the NIOSH Method 7601 to measure crystalline silica content of reparable dust samples. Spirometry test was also applied to assess workers' pulmonary function parameters. RESULTS: Respirable dust concentration was in the range of 1.77 to 6.12 mg/m3. The concentration of crystalline silica in all units was higher than the Threshold Limit Value (TLV) (0.025 mg / m3). There were a significant difference in the Peak Expiratory Flow (PEF) parameter among workers in the two exposed and non-exposed groups to respirable dust (P= 0.017). In other parameters of pulmonary function (FVC, FEV1, FEF 25-75, FEV1/FVC %), there were no significant differences between the two groups under study (P= 0.45, P= 0.14, P= 0.29 and P= 0.23, respectively). CONCLUSION: The findings of this study have provided an evidence to confirm the hypothesis that exposure to cement dust can cause complication in PEF parameter of cement industry workers.

Public health risk management case concerning the city of Isfahan according to a hypothetical release of HF from a chemical plant.

Accidents have happened in the chemical industries all over the world with serious consequences for the adjacent heavily populated areas. In this study, the impact of the probable hypothetical event, releasing considerable amounts of hydrogen fluoride (HF) as a strong irritant into the atmosphere over the city of Isfahan from a strategic chemical plant, was simulated by computational fluid dynamics (CFD). In this model, the meteorological parameters were integrated into time and space, and dispersion of the pollutants was estimated based on a probable accidental release of HF. According to the hypothetical results of the simulation model in this study, HF clouds reached Isfahan in 20 min and exposed 80% of the general public to HF concentration in the range of 0-34 ppm. Then, they dissipated 240 min after the time of the incident. Supposing the uniform population density within the proximity of the city of Isfahan with the population of 1.75 million, 5% of the population (87,500 people) could be exposed for a few minutes to a HF concentration as high as 34 ppm. This concentration is higher than a very hazardous concentration described as the Immediate Danger to Life and Health (30 ppm). This hypothetical risk evaluation of environmental exposure to HF with the potential of health risks was very instrumental for the general public of Isfahan in terms of risk management. Similar studies based on probable accidental scenarios along with the application of a simulation model for computation of dispersed pollutants are recommended for risk evaluation and management of cities in the developing countries with a fast pace of urbanization around the industrial sites.

Risk assessment of occupational exposure to benzene using numerical simulation in a complex geometry of a reforming unit of petroleum refinery.

There has been an increasing concern about the continuous and the sudden release of volatile organic pollutants from petroleum refineries and occupational and environmental exposures. Benzene is one of the most prevalent volatile compounds, and it has been addressed by many authors for its potential toxicity in occupational and environmental settings. Due to the complexities of sampling and analysis of benzene in routine and accidental situations, a reliable estimation of the benzene concentration in the outdoor setting of refinery using a computational fluid dynamics (CFD) could be instrumental for risk assessment of occupational exposure. In the present work, a computational fluid dynamic model was applied for exposure risk assessment with consideration of benzene being released continuously from a reforming unit of a refinery. For simulation of benzene dispersion, GAMBIT, FLUENT, and CFD post software are used as preprocessing, processing, and post-processing, respectively. Computational fluid dynamic validation was carried out by comparing the computed data with the experimental measurements. Eventually, chronic daily intake and lifetime cancer risk for routine operations through the two seasons of a year are estimated through the simulation model. Root mean square errors are 0.19 and 0.17 for wind speed and concentration, respectively. Lifetime risk assessments of workers are 0.4-3.8 and 0.0096-0.25 per 1000 workers in stable and unstable atmospheric conditions, respectively. Exposure risk is unacceptable for the head of shift work, chief engineer, and general workers in 141 days (38.77%) in a year. The results of this study show that computational fluid dynamics is a useful tool for modeling of benzene exposure in a complex geometry and can be used to estimate lifetime risks of occupation groups in a refinery setting.

How far are we from full implementation of health promoting workplace concepts? A review of implementation tools and frameworks in workplace interventions.

INTRODUCTION: Health promoting workplace frameworks provide a holistic view on determinants of workplace health and the link between individuals, work and environment, however, the operationalization of these frameworks has not been very clear. This study provides a typology of the different understandings, frameworks/tools used in the workplace health promotion practice or research worldwide. It discusses the degree of their conformity with Ottawa Charter's spirit and the key actions expected to be implemented in health promoting settings such as workplaces. METHOD: A comprehensive online search was conducted utilizing relevant key words. The search also included official websites of related international, regional, and national organizations. After exclusion, 27 texts were analysed utilizing conventional content analyses. RESULTS: The results of the analysis were categorized as dimensions (level or main structure) of a healthy or health promoting workplaces and subcategorized characteristics/criteria of healthy/health promoting workplace. DISCUSSION AND CONCLUSION: Our analysis shows diversity and ambiguity in the workplace health literature regarding domains and characteristics of a healthy/health promoting workplace. This may have roots in lack of a common understanding of the concepts or different social and work environment context. Development of global or national health promoting workplace standards in a participatory process might be considered as a potential solution.

The Effect of Wood Aerosols and Bioaerosols on the Respiratory Systems of Wood Manufacturing Industry Workers in Golestan Province.

BACKGROUND: Occupational exposure to dust leads to acute and chronic respiratory diseases, occupational asthma, and depressed lung function. In the light of a lack of comprehensive studies on the exposure of Iranian workers to wood dusts, the objective of this study was to monitor the occupational exposure to wood dust and bioaerosol, and their correlation with the lung function parameters in chipboard manufacturing industry workers. MATERIALS AND METHODS: A cross-sectional study was conducted on chipboard workers in Golestan Province; a total of 150 men (100 exposed cases and 50 controls) were assessed. Workers were monitored for inhalable wood dust and lung function parameters, i.e., FVC, FEV1, FEV1/FVC, and FEF25-75%. The workers' exposure to bioaerosols was measured using a bacterial sampler; a total of 68 area samples were collected. The analysis was performed using the Mann-Whitney, Kruskal-Wallis, and regression statistical tests. RESULTS: The geometric mean value and geometric standard deviation of inhalable wood dust for the exposed and control groups were 19 ± 2.00 mg/m3 and 0.008 ± 0.001 mg/m3, respectively. A statistically significant correlation was observed between the lung parameters and cumulative exposure to inhalable wood dust, whereas a statistically significant correlation was not observed between the lung parameters and bioaerosol exposure. However, the exposure of Iranian workers to bioaerosols was higher, compared to their foreign coworkers. CONCLUSION: Considering the high level of exposure among workers in this study along with their lung function results, long-term exposure to wood dust may be detrimental to the workers' health and steps to limit their exposure should be considered seriously.

Respiratory Effects of Simultaneous Exposure to Respirable Crystalline Silica Dust, Formaldehyde, and Triethylamine of a Group of Foundry Workers.

BACKGROUND: Foundry workers are occupationally exposed to hazardous substances such as silica dusts and toxic gases. The aim of this study was to examine the effects of simultaneous exposure to complex mixtures of silica dust, formaldehyde, and triethylamine on lung function parameters. STUDY DESIGN: A cross-sectional study. METHODS: This study was conducted on 55 male workers of core making unit of a foundry plant (the case group) and 55 workers in a food industry were enrolled as a control group in 2015. Workers were monitored for personal exposure to crystalline silica respirable dust, according the NIOSH method No.7602. The concentrations of formaldehyde and triethylamine were measured using a PID instrument. Lung function tests were performed according to the ERS/ATS standards. RESULTS: The mean concentrations of personal exposure to silica dust, formaldehyde, and triethylamine in the core making workers were 0.23 mg/m3, 2.85 ppm, and 5.55 ppm and respective exposures of control subjects were less than the LOD (limit of detection). There were significant associations between exposure to silica dust and decreases in FVC (Forced vital capacity) values (P<0.05). The findings showed a statistically significant synergistic effect of silica dust and triethylamine on FVC values (P<0.05). CONCLUSIONS: The mean exposure of all studied substances was higher than occupational exposure limits. Synergistic effects of exposure to silica dust and triethylamine on some lung function parameters were observed. Simultaneous exposure of foundry workers to silica dust and triethylamine could impair lung function.