Femtosecond laser fabrication of monolithic double volume phase-gratings in glass.

A diffractive optical element was fabricated by monolithically integrating two volume phase-gratings (VPGs) in the bulk of a single-piece transparent material. A computer model of the diffraction generated by the double volume phase-grating (DVPG) was made with a rigorous coupled wave analysis simulator. Simulations and experiments show that the diffractive behavior of a DVPG can be controlled by arranging the relative displacement and the distance between the VPGs according to Talbot self-imaging planes. In order to diffract the total incident light, the phase accumulation in the VPGs has to be π/2, which was achieved by single-scan femtosecond laser processing of a nanocrystal doped glass as the substrate material. Ex situ microscope images of the cross-sections are presented for laser processed lines in the form of VPGs and DVPGs. The far-field diffraction of DVPGs formed by selectively located VPGs was characterized with a monochromatic 633 nm and a supercontinuum white light. Functional designs of high diffraction efficiency with potential applications in photonics were successfully fabricated in a one-step and free of chemicals process.

Femtosecond laser fabrication of volume-phase gratings in CdSxSe1-x-doped borosilicate glass at a low repetition rate.

Volume-phase gratings (VPGs) were fabricated in CdSxSe1-x quantum-dot-doped borosilicate glass at a low repetition rate (800 nm, 140 fs, 1 kHz). The VPGs were designed based on rigorous coupled wave analysis simulations. Results indicate that the inscribed thickness (L) is the key parameter to maximize the diffraction efficiency at order 1. Microscope images of the cross sections and diffraction efficiency measurements were taken in order to characterize the modification of the material at different laser-inscription parameters. A maximum VPG diffraction efficiency of 67% (at order 1) was achieved. Also, a refractive index change of Δn=2.25·10-3 is estimated from these VPG diffraction efficiency measurements. The measurements regarding polarization-insensitive diffraction efficiency showed that the birefringence produced in the substrate is negligible.

Author Correction: Tailoring diamond's optical properties via direct femtosecond laser nanostructuring.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Tailoring diamond's optical properties via direct femtosecond laser nanostructuring.

We demonstrate a rapid, accurate, and convenient method for tailoring the optical properties of diamond surfaces by employing laser induced periodic surface structuring (LIPSSs). The characteristics of the fabricated photonic surfaces were adjusted by tuning the laser wavelength, number of impinging pulses, angle of incidence and polarization state. Using Finite Difference Time Domain (FDTD) modeling, the optical transmissivity and bandwidth was calculated for each fabricated LIPSSs morphology. The highest transmission of ~99.5% was obtained in the near-IR for LIPSSs structures with aspect ratios of the order of ~0.65. The present technique enabled us to identify the main laser parameters involved in the machining process, and to control it with a high degree of accuracy in terms of structure periodicity, morphology and aspect ratio. We also demonstrate and study the conditions for fabricating spatially coherent nanostructures over large areas maintaining a high degree of nanostructure repeatability and optical performance. While our experimental demonstrations have been mainly focused on diamond anti-reflection coatings and gratings, the technique can be easily extended to other materials and applications, such as integrated photonic devices, high power diamond optics, or the construction of photonic surfaces with tailored characteristics in general.