Surface termination effects on Raman spectra of Ti3C2Tx MXenes: an in situ UHV analysis.

Ti3C2Tx MXenes have typically a mixed surface termination of oxygen, hydroxyl and fluorine groups (Tx). In this work, we investigate the influence of the surface termination on the vibrational properties of Ti3C2Tx by performing thermal desorption and in situ Raman spectroscopy in ultra-high-vacuum (UHV). Significant changes in the Raman spectra occur after annealing above 600 °C, correlated with the desorption of approximately 80% of the fluorine termination, as confirmed by mass spectrometry and X-ray photoemission spectra. In particular, the intense Raman mode at 203 cm-1, usually attributed to a Ti-C-layer stretching vibration, is strongly damped upon fluorine desorption, while the broad spectral features between 220 and 680 cm-1, usually attributed to surface group vibrations, are not changing significantly. We show that the Raman spectra and the change induced by fluorine desorption are well represented by the phonon density of states instead of zone-center phonon modes. Disorder-induced Raman scattering strongly contributes to the Raman spectra. Moreover, due to the metallic nature of MXenes, charge density fluctuation scattering contributes as well. We show that the two scattering mechanisms, deformation potential and charge density fluctuation, may lead to opposite interpretations concerning the symmetry of the fluorine-related mode at 203 cm-1. This study provides new insights into the interpretation of the Raman spectra of MXenes, especially regarding the relation between surface chemistry and vibrational spectroscopy.

Nanoscale Surface and Bulk Electronic Properties of Ti3C2Tx MXene Unraveled by Multimodal X-Ray Spectromicroscopy.

2D layered materials, such as transition metal carbides or nitrides, known as MXenes, offer an ideal platform to investigate charge transfer processes in confined environment, relevant for energy conversion and storage applications. Their rich surface chemistry plays an essential role in the pseudocapacitive behavior of MXenes. However, the local distribution of surface functional groups over single flakes and within few- or multilayered flakes remains unclear. In this work, scanning X-ray microscopy (SXM) is introduced with simultaneous transmission and electron yield detection, enabling multimodal nanoscale chemical imaging with bulk and surface sensitivity, respectively, of individual MXene flakes. The Ti chemical bonding environment is found to significantly vary between few-layered hydrofluoric acid-etched Ti3C2Tx MXenes and multilayered molten salt (MS)-etched Ti3C2Tx MXenes. Postmortem analysis of MS-etched Ti3C2Tx electrodes cycled in a Li-ion battery further illustrates that simultaneous bulk and surface chemical imaging using SXM offers a method well adapted to the characterization of the electrode-electrolyte interactions at the nanoscale.

Nanointerfaces: Concepts and Strategies for Optical and X-ray Spectroscopic Characterization.

Interfaces at the nanoscale, also called nanointerfaces, play a fundamental role in physics and chemistry. Probing the chemical and electronic environment at nanointerfaces is essential in order to elucidate chemical processes relevant for applications in a variety of fields. Many spectroscopic techniques have been applied for this purpose, although some approaches are more appropriate than others depending on the type of the nanointerface and the physical properties of the different phases. In this Perspective, we introduce the major concepts to be considered when characterizing nanointerfaces. In particular, the interplay between the characteristic length of the nanointerfaces, and the probing and information depths of different spectroscopy techniques is discussed. Differences between nano- and bulk interfaces are explained and illustrated with chosen examples from optical and X-ray spectroscopies, focusing on solid-liquid nanointerfaces. We hope that this Perspective will help to prepare spectroscopic characterization of nanointerfaces and stimulate interest in the development of new spectroscopic techniques adapted to the nanointerfaces.

Overcoming Diffusion Limitation of Faradaic Processes: Property-Performance Relationships of 2D Conductive Metal-Organic Framework Cu3 (HHTP)2 for Reversible Lithium-Ion Storage.

Faradaic reactions including charge transfer are often accompanied with diffusion limitation inside the bulk. Conductive two-dimensional frameworks (2D MOFs) with a fast ion transport can combine both-charge transfer and fast diffusion inside their porous structure. To study remaining diffusion limitations caused by particle morphology, different synthesis routes of Cu-2,3,6,7,10,11-hexahydroxytriphenylene (Cu3 (HHTP)2 ), a copper-based 2D MOF, are used to obtain flake- and rod-like MOF particles. Both morphologies are systematically characterized and evaluated for redox-active Li+ ion storage. The redox mechanism is investigated by means of X-ray absorption spectroscopy, FTIR spectroscopy and in situ XRD. Both types are compared regarding kinetic properties for Li+ ion storage via cyclic voltammetry and impedance spectroscopy. A significant influence of particle morphology for 2D MOFs on kinetic aspects of electrochemical Li+ ion storage can be observed. This study opens the path for optimization of redox active porous structures to overcome diffusion limitations of Faradaic processes.

Insights into Electrolytic Pre-Lithiation: A Thorough Analysis Using Silicon Thin Film Anodes.

Pre-lithiation via electrolysis, herein defined as electrolytic pre-lithiation, using cost-efficient electrolytes based on lithium chloride (LiCl), is successfully demonstrated as a proof-of-concept for enabling lithium-ion battery full-cells with high silicon content negative electrodes. An electrolyte for pre-lithiation based on γ-butyrolactone and LiCl is optimized using boron-containing additives (lithium bis(oxalato)borate, lithium difluoro(oxalate)borate) and CO2 with respect to the formation of a protective solid electrolyte interphase (SEI) on silicon thin films as model electrodes. Reversible lithiation in Si||Li metal cells is demonstrated with Coulombic efficiencies (CEff ) of 95-96% for optimized electrolytes comparable to 1 m LiPF6 /EC:EMC 3:7. Formation of an effective SEI is shown by cyclic voltammetry and X-ray photoelectron spectroscopy (XPS). electrolytic pre-lithiation experiments show that notable amounts of the gaseous product Cl2 dissolve in the electrolyte leading to a self-discharge Cl2 /Cl- shuttle mechanism between the electrodes lowering pre-lithiation efficiency and causing current collector corrosion. However, no significant degradation of the Si active material and the SEI due to contact with elemental chlorine is found by SEM, impedance, and XPS. In NCM111||Si full-cells, the capacity retention in the 100th cycle can be significantly increased from 54% to 78% by electrolytic pre-lithiation, compared to reference cells without pre-lithiation of Si.

Demonstrating Apparently Inconspicuous but Sensitive Impacts on the Rollover Failure of Lithium-Ion Batteries at a High Voltage.

Layered oxides, such as Li[Ni0.5Co0.2Mn0.3]O2 (NCM523), are promising cathode materials for operation at a high voltage, i.e., high-energy lithium-ion batteries. The instability-reasoned transition metal dissolution remains a major challenge, which initiates electrode cross-talk, alteration of the solid electrolyte interphase, and enhanced Li-metal dendrite formation at the graphite anode, consequently leading to rollover failure. In this work, relevant impacts on this failure mechanism are highlighted. For example, a conventional coating of NCM523 with aluminum oxide as a typical high-voltage modification improves kinetic aspects but can only postpone the rollover failure to later charge/discharge cycles. Interestingly, a similar effect on the rollover failure is observed merely after modification of the cell formation protocol, i.e., the first cycles. Further influences of specific test protocols are highlighted and show that the rollover failure even disappears at C-rates above 2C, which can be attributed to a more homogeneous distribution of Li-metal dendrite formation. It is worth noting that a variation of anode porosity can reveal similar effects, as, e.g., variations in anode processing also impact Li dendrite distribution and the appearance of rollover failure. Overall, the rollover failure is a valid but complex phenomenon, which sensitively depends on apparently inconspicuous parameters and should not be disregarded.

Solvent Co-Intercalation-Induced Activation and Capacity Fade Mechanism of Few-/Multi-Layered MXenes in Lithium Ion Batteries.

MXenes attract tremendous research efforts since their discovery in 2011 due to their unique physical and chemical properties, allowing for application in various fields. One of them is electrochemical energy storage due to their pseudocapacitive (=redox) behavior, high electronic conductivity, and charge storage versatility regarding the cationic species (e.g., Li+ ). MXenes typically display stable charge/discharge cycling behavior over hundreds of cycles in numerous electrolytes, however, a drastic loss of reversible capacity is detectable during the initial cycles. Furthermore, an electrochemical "activation" is also reported in the literature, especially for free-standing electrodes. Here, these electrochemical phenomena are investigated by electrochemical and analytical means to decipher the responsible mechanism by comparing few-layered and multi-layered Ti3 C2 Tx . A change in the pseudocapacitive behavior of MXenes during cycling can be explained by in situ X-ray diffraction studies, revealing solvent co-intercalation in the first cycle for the morphologically different MXenes. This co-intercalation is responsible for the capacity decay detected in the first cycles and is also responsible for the ongoing "activation" occurring in later cycles.

Scalable Synthesis of MAX Phase Precursors toward Titanium-Based MXenes for Lithium-Ion Batteries.

MXenes have emerged as one of the most interesting material classes, owing to their outstanding physical and chemical properties enabling the application in vastly different fields such as electrochemical energy storage (EES). MXenes are commonly synthesized by the use of their parent phase, i.e., MAX phases, where "M" corresponds to a transition metal, "A" to a group IV element, and "X" to carbon and/or nitrogen. As MXenes display characteristic pseudocapacitive behaviors in EES technologies, their use as a high-power material can be useful for many battery-like applications. Here, a comprehensive study on the synthesis and characterization of morphologically different titanium-based MXenes, i.e., Ti3C2 and Ti2C, and their use for lithium-ion batteries is presented. First, the successful synthesis of large batches (≈1 kg) of the MAX phases Ti3AlC2 and Ti2AlC is shown, and the underlying materials are characterized mainly by focusing on their structural properties and phase purity. Second, multi- and few-layered MXenes are successfully synthesized and characterized, especially toward their ever-present surface groups, influencing the electrochemical behavior to a large extent. Especially multi- and few-layered Ti3C2 are achieved, exhibiting almost no oxidation and similar content of surface groups. These attributes enable the precise comparison of the electrochemical behavior between morphologically different MXenes. Since the preparation method for few-layered MXenes is adapted to process both active materials in a "classical" electrode paste processing method, a better comparison between both materials is possible by avoiding macroscopic differences. Therefore, in a final step, the aforementioned electrochemical performance is evaluated to decipher the impact of the morphology difference of the titanium-based MXenes. Most importantly, the delamination leads to an increased non-diffusion-limited contribution to the overall pseudocapacity by enhancing the electrolyte access to the redox-active sites.

Solvent Co-intercalation into Few-layered Ti3C2Tx MXenes in Lithium Ion Batteries Induced by Acidic or Basic Post-treatment.

MXenes, as an emerging class of 2D materials, display distinctive physical and chemical properties, which are highly suitable for high-power battery applications, such as lithium ion batteries (LIBs). Ti3C2Tx (Tx = O, OH, F, Cl) is one of the most investigated MXenes to this day; however, most scientific research studies only focus on the design of multilayered or monolayer MXenes. Here, we present a comprehensive study on the synthesis of few-layered Ti3C2Tx materials and their use in LIB cells, in particular for high-rate applications. The synthesized Ti3C2Tx MXenes are characterized via complementary XRD, Raman spectroscopy, XPS, EDX, SEM, TGA, and nitrogen adsorption techniques to clarify the structural and chemical changes, especially regarding the surface groups and intercalated cations/water molecules. The structural changes are correlated with respect to the acidic and basic post-treatment of Ti3C2Tx. Furthermore, the detected alterations are put into an electrochemical perspective via galvanostatic and potentiostatic investigations to study the pseudocapacitive behavior of few-layered Ti3C2Tx, exhibiting a stable capacity of 155 mAh g-1 for 1000 cycles at 5 A g-1. The acidic treatment of Ti3C2Tx synthesized via the in situ formation of HF through LiF/HCl is able to increase the initial capacity in comparison to the pristine or basic treatment. To gain further insights into the structural changes occurring during (de)lithiation, in situ XRD is applied for LIB cells in a voltage range from 0.01 to 3 V to give fundamental mechanistic insights into the structural changes occurring during the first cycles. Thereby, the increased initial capacity observed for acidic-treated MXenes can be explained by the reduced co-intercalation of solvent molecules.

Exploiting the Degradation Mechanism of NCM523 || Graphite Lithium-Ion Full Cells Operated at High Voltage.

Invited for this month's cover is the group of Tobias Placke and Martin Winter at the MEET Battery Research Center (University of Münster). The image shows the failure mechanism of high-voltage operated NCM523 || graphite lithium-ion cells, that is, the dissolution of transition metals (Mn, Co, Ni) from the NCM523 cathode and subsequent deposition at the graphite anode, resulting in formation of Li metal dendrites. The Full Paper itself is available at 10.1002/cssc.202002113.

Exploiting the Degradation Mechanism of NCM523 ∥ Graphite Lithium-Ion Full Cells Operated at High Voltage.

Layered oxides, particularly including Li[Nix Coy Mnz ]O2 (NCMxyz) materials, such as NCM523, are the most promising cathode materials for high-energy lithium-ion batteries (LIBs). One major strategy to increase the energy density of LIBs is to expand the cell voltage (>4.3 V). However, high-voltage NCM ∥ graphite full cells typically suffer from drastic capacity fading, often referred to as "rollover" failure. In this study, the underlying degradation mechanisms responsible for failure of NCM523 ∥ graphite full cells operated at 4.5 V are unraveled by a comprehensive study including the variation of different electrode and cell parameters. It is found that the "rollover" failure after around 50 cycles can be attributed to severe solid electrolyte interphase growth, owing to formation of thick deposits at the graphite anode surface through deposition of transition metals migrating from the cathode to the anode. These deposits induce the formation of Li metal dendrites, which, in the worst cases, result in a "rollover" failure owing to the generation of (micro-) short circuits. Finally, approaches to overcome this dramatic failure mechanism are presented, for example, by use of single-crystal NCM523 materials, showing no "rollover" failure even after 200 cycles. The suppression of cross-talk phenomena in high-voltage LIB cells is of utmost importance for achieving high cycling stability.

Impact of the Crystalline Li15Si4 Phase on the Self-Discharge Mechanism of Silicon Negative Electrodes in Organic Electrolytes.

Because of their high specific capacity and rather low operating potential, silicon-based negative electrode materials for lithium-ion batteries have been the subject of extensive research over the past 2 decades. Although the understanding of the (de)lithiation behavior of silicon has significantly increased, several major challenges have not been solved yet, hindering its broad commercial application. One major issue is the low initial Coulombic efficiency and the ever-present self-discharge of silicon electrodes. Self-discharge itself affects the long-term stability of electrochemical storage systems and, additionally, must be taken into consideration for inevitable prelithiation approaches. The impact of the crystalline Li15Si4 phase is of great interest as the phase transformation between crystalline (c) and amorphous (a) phases not only increases the specific surface area but also causes huge polarization. Moreover, there is the possibility for electrochemical over-lithiation toward the Li15+aSi4 phase because of the electron-deficient Li15Si4 phase, which can be highly reactive toward the electrolyte. This poses the question about the impact of the c-Li15Si4 phase on the self-discharge behavior in comparison to its amorphous counterpart. Here, silicon thin films used as model electrodes are lithiated to cut-off potentials of 10 mV and 50 mV versus Li|Li+ (U10mV and U50mV) in order to systematically investigate their self-discharge mechanism via open-circuit potential (UOCP) measurements and to visualize the solid electrolyte interphase (SEI) growth by means of scanning electrochemical microscopy. We show that the c-Li15Si4 phase is formed for the U10mV electrode, while it is not found for the U50mV electrode. In turn, the U50mV electrode displays an almost linear self-discharge behavior, whereas the U10mV electrode reaches a UOCP plateau at ca. 380 mV versus Li|Li+, which is due to the phase transition from c-Li15Si4 to the a-LixSi phase. At this plateau potential, the phase transformation at the Si|electrolyte interface results in an electronically more insulating and more uniform SEI (U10mV electrode), while the U50mV electrode displays a less uniform SEI layer. In summary, the self-discharge mechanism of silicon electrodes and, hence, the irreversible decomposition of the electrolyte and the corresponding SEI formation process heavily depend on the structural nature of the underlying lithium-silicon phase.