Improving lithium-ion cells by replacing polyethylene terephthalate jellyroll tape.

Polyethylene terephthalate (PET) tape is widely used by well-known lithium-ion battery manufacturers to prevent electrode stacks from unwinding during assembly. PET tape is selected since it has suitable mechanical and electrical properties, but its chemical stability has been largely overlooked. In the absence of effective electrolyte additives, PET can depolymerize into its monomer dimethyl terephthalate, which is an unwanted redox shuttle that induces substantial self-discharge in a lithium-ion cell. This study presents a chemical screening experiment to probe the PET decomposition mechanism involving in situ generated methanol and lithium methoxide from dimethyl carbonate, one of the most common electrolyte solvents in lithium-ion cells. By screening other polymers, it is found that polypropylene and polyimide (Kapton) are stable in the electrolyte. Finally, it is demonstrated that reversible self-discharge of LiFePO4-graphite cells can be virtually eliminated by replacing PET jellyroll tape with chemically stable polypropylene tape.

A Toolbox for the Determination of Nitroaromatic Explosives in Marine Water, Sediment, and Biota Samples on Femtogram Levels by GC-MS/MS.

To determine the amount of the explosives 1,3-dinitrobenzene, 2,4-dinitrotoluene, 2,4,6-trinitrotoluene, and its metabolites in marine samples, a toolbox of methods was developed to enhance sample preparation and analysis of various types of marine samples, such as water, sediment, and different kinds of biota. To achieve this, established methods were adapted, improved, and combined. As a result, if explosive concentrations in sediment or mussel samples are greater than 10 ng per g, direct extraction allows for time-saving sample preparation; if concentrations are below 10 ng per g, techniques such as freeze-drying, ultrasonic, and solid-phase extraction can help to detect even picogram amounts. Two different GC-MS/MS methods were developed to enable the detection of these explosives in femtogram per microliter. With a splitless injector, limits of detection (LODs) between 77 and 333 fg/µL could be achieved in only 6.25 min. With the 5 µL programmable temperature vaporization-large volume method (PTV-LVI), LODs between 8 and 47 fg/µL could be achieved in less than 7 min. The detection limits achieved by these methods are among the lowest published to date. Their reliability has been tested and confirmed by measuring large and diverse sample sets.