RESUMO
An ink dating method based on solvent analysis was recently developed using thermal desorption followed by gas chromatography/mass spectrometry (GC/MS) and is currently implemented in several forensic laboratories. The main aims of this work were to implement this method in a new laboratory to evaluate whether results were comparable at three levels: (i) validation criteria, (ii) aging curves, and (iii) results interpretation. While the results were indeed comparable in terms of validation, the method proved to be very sensitive to maintenances. Moreover, the aging curves were influenced by ink composition, as well as storage conditions (particularly when the samples were not stored in "normal" room conditions). Finally, as current interpretation models showed limitations, an alternative model based on slope calculation was proposed. However, in the future, a probabilistic approach may represent a better solution to deal with ink sample inhomogeneity.
RESUMO
Several ink dating methods based on solvents analysis using gas chromatography/mass spectrometry (GC/MS) were proposed in the last decades. These methods follow the drying of solvents from ballpoint pen inks on paper and seem very promising. However, several questions arose over the last few years among questioned documents examiners regarding the transparency and reproducibility of the proposed techniques. These questions should be carefully studied for accurate and ethical application of this methodology in casework. Inspired by a real investigation involving ink dating, the present paper discusses this particular issue throughout four main topics: aging processes, dating methods, validation procedures and data interpretation. This work presents a wide picture of the ink dating field, warns about potential shortcomings and also proposes some solutions to avoid reporting errors in court.
RESUMO
Two main approaches can be used for determining the age of an ink: indirect dating and direct dating. Indirect dating is based on the chemical analysis of an ink followed by comparison with known samples in a reference collection. The collection should contain information about the inks including the market introduction dates. This approach may allow for an anachronism to be detected. The second concept is based on measuring ink components that change with age. The analysis of solvents in ballpoint inks may be a useful parameter for determining the age of ink on paper. In a previous study, the authors demonstrated that thermal desorption of ink directly from paper, followed by chemical analysis using gas chromatography-mass spectrometry (GC-MS), is a promising procedure for characterizing ink-binder resins and solvents. Preliminary tests showed that monitoring the evaporation of ink solvent from ink on paper is not a suitable method for ink dating. Thermal analysis of ink on paper in two steps revealed that fresh ink releases a relative amount of solvent at a certain low temperature in a defined period of time, which decreases as the ink ages. As a consequence, this relative amount of solvent released at a certain low temperature, and its decrease with time, can be used to estimate ink age. This age-dependent parameter was studied in 85 different inks ranging in age from 1 week to 1.5 years. It was found that some inks showed a significant decrease of this parameter up to an age of several months, and that the aging process can be monitored within this period. For other inks, however, the age-dependent parameter decreases relatively fast, e.g., within a few days, to a constant level, which can be too fast for casework. Based on these results, a general procedure for assessing the age of ballpoint pen inks on paper was developed.
RESUMO
The characterization of ink on paper is of importance for dating and comparing questioned ink entries in forensic document examination. Inks are commonly characterized by their colorant profile that is identified by well-established analytical methods. Numerous ink formulations show identical colorant profiles, though. In order to differentiate inks that are not distinguishable by colorant analysis, a method for the characterization of colorless ink ingredients, namely binders, solvents and additives is necessary. In this paper, we propose a technique for the analysis of colorless compounds in ballpoint inks using direct thermal desorption of the ink on paper followed by chemical analysis of the desorbed volatile compounds by gas chromatography-mass spectrometry. As compared to liquid extraction and subsequent analysis of the extracts, the technique avoids possible contamination risks. Sensitivity is very high due to the enrichment of volatile components by thermal desorption. Even from old samples, the chromatograms obtained by the method enable the determination of binder polymers, solvents and additives. Pure binders as used by ink manufacturers were analyzed for unambiguous assignment of analytical results to specific polymers. To prove the practical applicability, we analyzed 121 ballpoint pens, not all having the same colorant profile, and grouped the pens into resin and solvent categories.
RESUMO
Differentiation and classification of ink entries with dated samples of a reference collection are important aspects in the examination of questioned documents. Classification of writing inks is presently achieved by analysis of dyes and colorants contained in the ink. This technique has its limitations in newly developed ink formulations with identical dye composition but differing in their solvents and binder resins. This paper introduces a method for the determination of solvents and binder resins of an ink sample directly from paper without sample preparation. This aim is accomplished by thermodesorption of the sample followed by gas chromatography/mass spectroscopy. The method was tested on numerous samples of ballpoint pen inks, which were subsequently grouped into several solvent and resin subgroups. A case study shows the applicability of the newly developed method.
