In Situ Characterization of Mixtures of Linear and Branched Hydrocarbons Confined within Porous Media Using 2D DQF-COSY NMR Spectroscopy.

The analysis of 1D anti-diagonal spectra from the projections of 2D double-quantum filtered correlation spectroscopy NMR spectra is presented for the determination of the compositions of liquid mixtures of linear and branched alkanes confined within porous media. These projected spectra do not include the effects of line broadening and therefore retain high-resolution information even in the presence of inhomogeneous magnetic fields as are commonly found in porous media. A partial least-square regression analysis is used to characterize the mixture compositions. Two case studies are considered. First, mixtures of 2-methyl alkanes and n-alkanes are investigated. It is shown that estimation of the mol % of branched species present was achieved with a root-mean-square error of prediction (RMSEP) of 1.4 mol %. Second, the quantification of multicomponent mixtures consisting of linear alkanes and 2-, 3-, and 4-monomethyl alkanes was considered. Discrimination of 2-methyl and linear alkanes from other branched isomers in the mixture was achieved, although discrimination between 3- and 4- monomethyl alkanes was not possible. Compositions of the linear alkane, 2-methyl alkane, and the total composition of 3- and 4-methyl alkanes were estimated with a RMSEP <3 mol %. The approach was then used to estimate the composition of the mixtures in terms of submolecular groups of CH3CH2, (CH3)2CH, and CH2CH(CH3)CH2 present in the mixtures; a RMSEP <1 mol % was achieved for all groups. The ability to characterize the mixture compositions in terms of molecular subgroups allows the application of the method to characterize mixtures containing multimethyl alkanes. The motivation for this work is to develop a method for determining the mixture composition inside the catalyst pores during Fischer-Tropsch synthesis. However, the method reported is generic and can be applied to any system in which there is a need to characterize mixture compositions of linear and branched alkanes.

Experimental Determination of H2 and CO Diffusion Coefficients in a Wax Mixture Confined in a Porous Titania Catalyst Support.

The ability to measure and predict molecular diffusion coefficients in multicomponent mixtures is not only of fundamental scientific interest but also of significant relevance in understanding how catalytic processes proceed. In the present work, the direct measurement of the molecular diffusion of H2 and CO gas-phase species diffusing in n-alkane mixtures using pulsed-field gradient (PFG) nuclear magnetic resonance (NMR) methods is reported. The work is of direct relevance to Fischer-Tropsch (FT) catalysis, with the measurements being made of the gas-wax system with the wax in both the bulk liquid state and when confined within a titania catalyst support, at temperatures and pressures typical of low-temperature FT synthesis. Molecular diffusion coefficients of H2 and CO within wax-saturated porous titania in the range (1.00-2.43) × 10-8 and (6.44-8.50) × 10-9 m2 s-1, respectively, were measured in the temperature range of 140-240 and 200-240 °C for H2 and CO, respectively, at a pressure of 40 bar. The wax mixture was typical of a wax produced during FT catalysis and had a molar average carbon number of 36. It is shown that the hydrogen diffusion coefficient within this wax mixture is consistent, to within experimental error, with the hydrogen diffusion coefficient measured in pure single-component n-hexatriacontane (n-C36) wax; this result held with the waxes in the bulk liquid state and when confined within the porous titania. The tortuosity of the porous titania was also measured using PFG NMR and found to be 1.77; this value is independent of temperature. The ability of existing correlations to predict these experimentally determined data was then critically evaluated. Although the Wilke-Chang correlation was found to underestimate the molecular diffusion coefficients of both H2 and CO diffusing in the wax in both the bulk state and when confined within the porous titania, parameterized correlations based on the rough hard sphere model, having accounted for the experimentally determined tortuosity factor, predicted the H2 and CO diffusion within bulk and confined wax to within 3%.

Mesoscopic Elastic Distortions in GaAs Quantum Dot Heterostructures.

Quantum devices formed in high-electron-mobility semiconductor heterostructures provide a route through which quantum mechanical effects can be exploited on length scales accessible to lithography and integrated electronics. The electrostatic definition of quantum dots in semiconductor heterostructure devices intrinsically involves the lithographic fabrication of intricate patterns of metallic electrodes. The formation of metal/semiconductor interfaces, growth processes associated with polycrystalline metallic layers, and differential thermal expansion produce elastic distortion in the active areas of quantum devices. Understanding and controlling these distortions present a significant challenge in quantum device development. We report synchrotron X-ray nanodiffraction measurements combined with dynamical X-ray diffraction modeling that reveal lattice tilts with a depth-averaged value up to 0.04° and strain on the order of 10-4 in the two-dimensional electron gas (2DEG) in a GaAs/AlGaAs heterostructure. Elastic distortions in GaAs/AlGaAs heterostructures modify the potential energy landscape in the 2DEG due to the generation of a deformation potential and an electric field through the piezoelectric effect. The stress induced by metal electrodes directly impacts the ability to control the positions of the potential minima where quantum dots form and the coupling between neighboring quantum dots.