Removal of Pharmaceutical Residues from Water and Wastewater Using Dielectric Barrier Discharge Methods-A Review.

Persistent pharmaceutical pollutants (PPPs) have been identified as potential endocrine disruptors that mimic growth hormones when consumed at nanogram per litre to microgram per litre concentrations. Their occurrence in potable water remains a great threat to human health. Different conventional technologies developed for their removal from wastewater have failed to achieve complete mineralisation. Advanced oxidation technologies such as dielectric barrier discharges (DBDs) based on free radical mechanisms have been identified to completely decompose PPPs. Due to the existence of pharmaceuticals as mixtures in wastewater and the recalcitrance of their degradation intermediate by-products, no single advanced oxidation technology has been able to eliminate pharmaceutical xenobiotics. This review paper provides an update on the sources, occurrence, and types of pharmaceuticals in wastewater by emphasising different DBD configurations previously and currently utilised for pharmaceuticals degradation under different experimental conditions. The performance of the DBD geometries was evaluated considering various factors including treatment time, initial concentration, half-life time, degradation efficiency and the energy yield (G50) required to degrade half of the pollutant concentration. The review showed that the efficacy of the DBD systems on the removal of pharmaceutical compounds depends not only on these parameters but also on the nature/type of the pollutant.

Review of the methods for determination of reactive oxygen species and suggestion for their application in advanced oxidation induced by dielectric barrier discharges.

Advanced oxidation processes (AOPs) particularly non-thermal plasmas based on electrical discharges have been widely investigated for water and wastewater treatment. Dielectric barrier discharges (DBDs) generate large amounts of selective and non-selective reactive oxygen species (ROS) such as ozone, hydrogen peroxide, atomic oxygen, superoxide molecular anions and hydroxyl radicals, having been proved to be efficient for water decontamination among various forms of electrical discharge systems. The detection and quantification methods of these oxygen species in non-thermal plasmas have been reviewed. However, their application in dielectric barrier discharge has not been well studied. It is therefore imperative to summarise the various detection and quantification methods for oxygen-based species determination in AOPs, aqueous systems and non-thermal plasma processes. Thereafter, reviewed methods are suggested for the determination of ROS in DBD configurations to understand the consumption trend of these oxidants during treatment of water effluents and to evaluate the performance of the treatment reactor configuration towards the degradation of targeted pollutants.

Leaching and antimicrobial properties of silver nanoparticles loaded onto natural zeolite clinoptilolite by ion exchange and wet impregnation.

This study aimed to compare the leaching and antimicrobial properties of silver that was loaded onto the natural zeolite clinoptilolite by ion exchange and wet impregnation. Silver ions were reduced using sodium borohydride (NaBH4). The leaching of silver from the prepared silver-clinoptilolite (Ag-EHC) nanocomposite samples and their antimicrobial activity on Escherichia coli Epi 300 were investigated. It was observed that the percentage of silver loaded onto EHC depended on the loading procedure and the concentration of silver precursor used. Up to 87% of silver was loaded onto EHC by wet impregnation. The size of synthesized silver nanoparticles varied between 8.71-72.67 nm and 7.93-73.91 nm when silver was loaded by ion exchange and wet impregnation, respectively. The antimicrobial activity of the prepared nanocomposite samples was related to the concentration of silver precursor used, the leaching rate and the size of silver nanoparticles obtained after reduction. However, only in the case of the nanocomposite sample (Ag-WEHC) obtained after loading 43.80 ± 1.90 µg of Ag per gram zeolite through wet impregnation was the leaching rate lower than 0.1 mg L-1 limit recommended by WHO, with an acceptable microbial killing effect.

Flavonols and an oxychromonol from Piliostigma reticulatum.

The leaf extract from the plant Piliostigma reticulatum was found to exhibit antimicrobial activity against some bacteria and fungi such as Staphylococcus aureus (NCTC 6571), Escherichia coli (NCTC 10418), Bacillus subtilis (NCTC 8236), Proteus vulgaris (NCTC 4175), Aspergillus niger (ATCC 10578) and Candida albicans (ATCC 10231). Upon investigation of the chemical constituents present in the leaf extract, a total of seven compounds were isolated and their structures were unambiguously established by spectroscopic methods including HR-MS and NMR spectrometry. Four of the isolated compounds were novel, namely 6-C-methyl-2-p-hydroxyphenyloxychromonol (piliostigmol), 1, 6,8-di-C-methylquercetin-3,3',7-trimethyl ether, 2, 6,8-di-C-methylquercetin-3,3'-dimethyl ether, 3 and 3',6,8,-tri-C-methylquercetin-3,7-dimethyl ether, 4. The other three were known C-methylated flavonols and they were isolated from P. reticulatum for the first time. These were 6-C-methylquercetin-3-methyl ether, 5, 6,8-di-C-methylkaempferol-3-methyl ether, 6 and 6-C-methylquercetin-3,3',7-trimethyl ether 7. All the isolated compounds were tested for cytotoxicity using the brine shrimp toxicity assay and all of them were active albeit at different levels. With respect to antibacterial activity piliostigmol, 1 showed the highest activity against E. coli (MIC=2.57 microg/ml, 0.006 micromol), which is three times more that of Amoxicillin, where as 4 and 7 showed the least activity.