Experimental studies of particle removal and probability of COVID-19 infection in passenger railcars.

A series of experiments in stationary and moving passenger railcars was conducted to measure the removal rates of particles in the size ranges of SARS-CoV-2 viral aerosols, and the air changes per hour provided by the existing and modified air handling systems. The effect of ventilation and air filtration systems on removal rates and their effects on estimated probability (i.e., risk) of infection was evaluated in a range of representative conditions: (1) for two different ratios of recirculated air (RA) to outdoor air (OA) (90:10 RA:OA and 67:33 RA:OA); (2) using minimum efficiency reporting value (MERV) filters with standard (MERV-8) and increased (MERV-13) filtration ratings; and (3) in the presence and absence of a portable high-efficiency particulate-air (HEPA) room air purifier system operated at clean air delivery rate (CADR) of 150 and 550 cfm. The higher-efficiency MERV-13 filters significantly increased particle removal rates on average by 3.8 to 8.4 hr-1 across particle sizes ranging from 0.3 to 10 µm (p < 0.01) compared to MERV-8 filters. The different RA:OA ratios and the use of a portable HEPA air purifier system had little effect on particle removal rates. MERV-13 filters reduced the estimated probability of infection by 42% compared to the MERV-8 filter. The use of a HEPA-air purifier with a MERV-13 filter causes a 50% reduction in the estimated probability of infection. Upgrading the efficiency of HVAC filters from MERV-8 to MERV-13 in public transit vehicles is the most effective exposure control method resulting in a clear reduction in the removal rates of aerosol particles and the estimated probability of infection.

Little cigars and cigarillos harbor diverse bacterial communities that differ between the tobacco and the wrapper.

Despite their potential importance with regard to infectious and chronic diseases among tobacco users, microbial constituents of tobacco products lack characterization. Specifically, to our knowledge, there are no data describing the bacterial diversity of little cigars or cigarillos. To address this knowledge gap, we tested four brands of little cigars and cigarillos. Tobacco and wrapper subsamples (n = 132) were separately subjected to DNA extraction, followed by PCR amplification of the V3V4 hypervariable region of the 16S rRNA gene, and sequencing using Illumina HiSeq. Sequences were analyzed using QIIME and Phyloseq implemented in R. We identified 2,681 operational taxonomic units across all products. Significant differences in alpha and beta diversity were observed between Swisher Sweets and Cheyenne products. Alpha and beta diversity was also significantly different between tobacco and wrapper subsamples within the same product. Beta diversity analyses of only tobacco samples identified no significant differences in the bacterial microbiota of different lots of the same products; however, the microbiota in the wrapper differed significantly across lots for all brands. Overall, Firmicutes were found to dominate in the wrapper, whereas Proteobacteria were most abundant in the tobacco. At the genus level, Bacillus and Lactobacillus dominated in the wrappers, and Staphylococcus and Pseudomonas dominated in the tobacco. Our findings suggest that the bacterial microbiota of little cigars and cigarillos is diverse and differs significantly between the tobacco and the wrapper, and across brands. Future work is necessary to evaluate the potential public health implications of these findings.

Standardizing industrial hygiene data collection forms used by workers' compensation insurers.

Workers' compensation (WC) insurers collect large amounts of industrial hygiene (IH) data in the United States. The data collected is not easily accessible for research or surveillance purposes. Individual WC insurers are using computerized systems to standardize and store the IH data, leaving a gap in standardization among the different WC insurers. This study sought to standardize IH data collection among WC insurers and to determine the feasibility of pooling collected IH data. IH air and noise survey forms were collected from WC insurers. Data fields on the forms were evaluated for importance and a study list of core fields was developed. The core study list was presented to an IH review panel for review before finalization. The final core study list was compared to recommendations published by the American Conference of Governmental Industrial Hygienists (ACGIH) and the American Industrial Hygiene Association (AIHA). Fifty-nine forms from 10 organizations were collected. Industrial hygienists from research organizations, state-based WC insurers, and private WC insurers participated in the data field evaluation and on the review panel. For both air and noise survey forms, more than half the data fields (55% and 54%, respectively) were ranked as "essential." Three of the four fields in the worker and control observations category ranked "essential" were found less than half of the time on both types of survey forms. The study list of core data elements consisted of more than half of the data fields from both the air and noise survey forms. Three additional fields were added based on the comparison to the ACGIH-AIHA recommendations. Data fields essential to standardizing IH data collection were identified and verified. The "essential" data fields will be made available and have the potential to be incorporated into WC insurers electronic IH data management systems. Future research should focus on other IH survey forms, such as those used in ergonomic assessments and specific chemical exposures, and methods to transfer data fields to electronic platforms.

Occupational exposure monitoring data collection, storage, and use among state-based and private workers' compensation insurers.

Despite substantial financial and personnel resources being devoted to occupational exposure monitoring (OEM) by employers, workers' compensation insurers, and other organizations, the United States (U.S.) lacks comprehensive occupational exposure databases to use for research and surveillance activities. OEM data are necessary for determining the levels of workers' exposures; compliance with regulations; developing control measures; establishing worker exposure profiles; and improving preventive and responsive exposure surveillance and policy efforts. Workers' compensation insurers as a group may have particular potential for understanding exposures in various industries, especially among small employers. This is the first study to determine how selected state-based and private workers' compensation insurers collect, store, and use OEM data related specifically to air and noise sampling. Of 50 insurers contacted to participate in this study, 28 completed an online survey. All of the responding private and the majority of state-based insurers offered industrial hygiene (IH) services to policyholders and employed 1 to 3 certified industrial hygienists on average. Many, but not all, insurers used standardized forms for data collection, but the data were not commonly stored in centralized databases. Data were most often used to provide recommendations for improvement to policyholders. Although not representative of all insurers, the survey was completed by insurers that cover a substantial number of employers and workers. The 20 participating state-based insurers on average provided 48% of the workers' compensation insurance benefits in their respective states or provinces. These results provide insight into potential next steps for improving the access to and usability of existing data as well as ways researchers can help organizations improve data collection strategies. This effort represents an opportunity for collaboration among insurers, researchers, and others that can help insurers and employers while advancing the exposure assessment field in the U.S.

Characterizing workforces exposed to current and emerging non-carbonaceous nanomaterials in the U.S.

OBJECTIVE: Toxicology studies suggest that exposure to certain types of engineered nanomaterials (ENMs) may cause adverse health effects, but little is known about the workforce in the United States that produces or uses these materials. In addition, occupational exposure control strategies in this industry are not well characterized. This study identified U.S. ENM manufacturers and users (other than carbon nanotubes and nanofibers, which have been characterized elsewhere), determined workforce size, characterized types and quantities of materials used, occupational exposure control strategies, and the feasibility of occupational ENM exposure studies. METHODS: Eligible companies were identified and information was collected through phone surveys on nanomaterials produced or used, workforce size, location, work practices, and exposure control strategies. The companies were classified into groups for additional examinations. RESULTS: Forty-nine companies producing or using ENMs in the U.S. were identified. These companies employed at least 1,500 workers. Most companies produced or used some form of nanoscale metal. More than half of the eligible companies were suppliers for the coatings, composite materials, or general industries. Each company provided information about worker exposure reduction strategies through engineering controls, administrative controls, or personal protective equipment. Production-scale companies reported greater use of specific exposure control strategies for ENMs than laboratory-scale companies. CONCLUSIONS: Workplaces producing or using ENMs report using engineering and administrative controls as well as personal protective equipment to control worker exposure. Industrywide exposure assessment studies appear feasible due to workforce size. However, more effort must be taken to target industries using specific ENMs based on known toxicological effects and health risks.

Mentholation affects the cigarette microbiota by selecting for bacteria resistant to harsh environmental conditions and selecting against potential bacterial pathogens.

BACKGROUND: There is a paucity of data regarding the microbial constituents of tobacco products and their impacts on public health. Moreover, there has been no comparative characterization performed on the bacterial microbiota associated with the addition of menthol, an additive that has been used by tobacco manufacturers for nearly a century. To address this knowledge gap, we conducted bacterial community profiling on tobacco from user- and custom-mentholated/non-mentholated cigarette pairs, as well as a commercially-mentholated product. Total genomic DNA was extracted using a multi-step enzymatic and mechanical lysis protocol followed by PCR amplification of the V3-V4 hypervariable regions of the 16S rRNA gene from five cigarette products (18 cigarettes per product for a total of 90 samples): Camel Crush, user-mentholated Camel Crush, Camel Kings, custom-mentholated Camel Kings, and Newport Menthols. Sequencing was performed on the Illumina MiSeq platform and sequences were processed using the Quantitative Insights Into Microbial Ecology (QIIME) software package. RESULTS: In all products, Pseudomonas was the most abundant genera and included Pseudomonas oryzihabitans and Pseudomonas putida, regardless of mentholation status. However, further comparative analysis of the five products revealed significant differences in the bacterial compositions across products. Bacterial community richness was higher among non-mentholated products compared to those that were mentholated, particularly those that were custom-mentholated. In addition, mentholation appeared to be correlated with a reduction in potential human bacterial pathogens and an increase in bacterial species resistant to harsh environmental conditions. CONCLUSIONS: Taken together, these data provide preliminary evidence that the mentholation of commercially available cigarettes can impact the bacterial community of these products.