Modification of halloysite lumen with dopamine derivatives as filler for antibiofilm coating.

HYPOTHESIS: Development of nanocomposite coating with antibiofilm properties is of fundamental importance to efficient fight biofilm formation preventing infections in biomedical area. In this context, halloysite nanotubes (HNTs), biocompatible and low-cost clay mineral, have been efficiently used as filler for different polymeric matrices affording several nanocomposites with appealing antimicrobial properties. The modification of HNTs surfaces represents a valuable strategy to improve the utilization of the clay for biological purposes. EXPERIMENTS: Herein, the covalent modification of the HNTs lumen with properly designed dopamine derivatives with different perfluoroalkyl chain length is reported. The obtained nanomaterials are thoroughly characterized by several techniques. As proof of concept the antibiofilm properties on E. coli strain of the nanomaterials are assayed as well. Finally, the HNTs fillers were introduced into a polydopamine matrix allowing for the preparation of functional coatings, resistant to formation of microbial biofilms. FINDINGS: All characterization methods proved the selectivity of the modification and the increased hydrophobicity of the lumen. In particular 27Al solid state nuclear magnetic resonance (NMR) spectra showed a upfield shift of the Al signal. Studies on the antibiofilm properties highlighted different activities according to the length of perfluoroalkyl chains of organic molecules as proved by 19F solid state NMR spectra. The synthetized materials were promising for future application as coatings on medical implants.

Kumagawa and Soxhlet Solvent Fractionation of Lignin: The Impact on the Chemical Structure.

We investigated the effects of solvent fractionation on the chemical structures of two commercial technical lignins. We compared the effect of Soxhlet and Kumagawa extraction. The aim of this work was to compare the impact of the methods and of the solvents on lignin characteristics. Our investigation confirmed the potentialities of fractionation techniques in refining lignin properties and narrowing the molecular weight distribution. Furthermore, our study revealed that the Kumagawa process enhances the capacity of oxygenated solvents (ethanol and tetrahydrofuran) to extract lignin that contains oxidized groups and is characterized by higher average molecular weights. Furthermore, the use of tetrahydrofuran after ethanol treatment enabled the isolation of lignin with a higher ratio between carbonyl and other oxidized groups. This result was confirmed by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), 13C NMR and two-dimensional (2D) NMR spectroscopies, gel permeation chromatography (GPC), and analytical pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) analysis. Ultraviolet-visible (UV-vis) spectra evidenced the enrichment in the most conjugated species observed in the extracted fractions. Elemental analyses pointed at the cleavage of C-heteroatom bonds enhanced by the Kumagawa extraction.

Reductive Amination Reaction for the Functionalization of Cellulose Nanocrystals.

Cellulose nanocrystals (CNCs) represent intriguing biopolymeric nanocrystalline materials, that are biocompatible, sustainable and renewable, can be chemically functionalized and are endowed with exceptional mechanical properties. Recently, studies have been performed to prepare CNCs with extraordinary photophysical properties, also by means of their functionalization with organic light-emitting fluorophores. In this paper, we used the reductive amination reaction to chemically bind 4-(1-pyrenyl)butanamine selectively to the reducing termini of sulfated or neutral CNCs (S_CNC and N_CNC) obtained from sulfuric acid or hydrochloric acid hydrolysis. The functionalization reaction is simple and straightforward, and it induces the appearance of the typical pyrene emission profile in the functionalized materials. After a characterization of the new materials performed by ATR-FTIR and fluorescence spectroscopies, we demonstrate luminescence quenching of the decorated N_CNC by copper (II) sulfate, hypothesizing for these new functionalized materials an application in water purification technologies.

Synthesis and Computational Study of Semicroconaines and Nonsymmetric Croconaines.

The synthesis of two new dye families of croconic acid derivatives, semicroconaine and nonsymmetric croconaine dyes, is reported for the first time. These compounds show strong absorption in the UV-visible and NIR, respectively. Semicroconaine dyes were obtained by a scalable and efficient condensation of croconic acid with aromatic heterocyclic methylene-active compounds. The subsequent reaction of the semicroconaine dyes with aromatic heterocyclic compounds affords nonsymmetric croconaines. The structure and electronic properties of the synthesized compounds have been investigated by preliminary theoretical calculations at DFT level of approximation.

Tailoring water stability of cellulose nanopaper by surface functionalization.

Cellulose nanopaper (CNP) features appealing properties, including transparency, flatness, a low thermal expansion coefficient and thermal stability, often outperforming conventional paper. However, free-standing crystalline cellulose films usually swell in water or upon moisture sorption, compromising part of their outstanding properties. This remains a major problem whenever working in a water environment is required. Freestanding cellulose nanopaper is prepared by solution casting water suspensions of cellulose nanocrystals with an average width of 10 nm and an average aspect ratio of 28, isolated from Avicel by acid hydrolysis and extensively characterized by AFM and FE-SEM measurements and GPC detection of their degree of polymerization. We demonstrate by elemental analyses, FT-IR, Raman spectroscopy, XRD measurements and water contact angle detection that wet treatment with lauroyl chloride results in surface hydrophobization of nanopaper. The hydrophobized nanopaper, C12-CNP, shows a more compact surface morphology than the starting CNP, due to the effect of chemical functionalization, and presents enhanced resistance to water, as assessed by electrochemical permeation experiments. The new hydrophobized nanopaper is a promising substrate for thin film devices designed to work in a humid environment.

Pd-Catalyzed Thiophene-Aryl Coupling Reaction via C-H Bond Activation in Deep Eutectic Solvents.

Direct arylation of 5-octylthieno[3,4-c]pyrrole-4,6-dione with a series of functionalized aryl iodides via C-H bond activation is demonstrated in a deep eutectic solvent made of choline chloride and urea in non-anhydrous conditions and without exclusion of air. This is the first demonstration of a thiophene-aryl coupling via direct arylation in deep eutectic solvents.

Discrimination of mercuric ions in piezoelectric sensors with a conjugated polymeric active layer.

The synthetic conjugated poly(1,4-arylene-2,5-thienylene) containing benzo[c][2,1,3]thiadiazole monomeric units (Bz-PAT) is proposed as active layer for the selective detection of mercuric ions. The Bz-PAT polymer chemical structure induces the formation of a disordered film with numerous vacancies and the size of these defects could be exploited for a reversible trapping of mercuric ions. For these reasons the Langmuir-Schaefer (LS) deposition method has been employed for transferring Bz-PAT layers with the desired accurate bi-dimensional organization control of the layer and with a high control of the deposition parameters. In this contribution, the frequency variation of quartz crystal microbalances functionalized with 10, 20, 30 and 40 LS runs of Bz-PAT have been investigated in response to the injection of aqueous solutions of HgCl2, Pb(NO3)2, NiCl2, CdCl2 and ZnSO4 at different concentrations (0.5 mM, 1 mM, 5 mM). An almost linear dependence on the number of the LS layers and hence on the film thickness, measured by means of ellipsometric spectroscopy, has been found in terms of sensor response to concentration of Hg2+ ions fluxed. By means of UV-Vis spectroscopy, the variations in the π-π* absorption band of the polymer, attributed to the thiophene segment, induced by HgCl2 injection has been analyzed and explained as a consequence of the electron transfer from the mercuric ion to the polymer solid film. These results, together with the linear relation found between the number of deposited layers and LS film thickness, suggest that the sensing mechanism can be explained both by an electron interaction between active layer and analyte and a diffusion mechanism of Hg2+ into the solid film that reaches an asymptotic value at 30 runs (about 80 nm), then a higher number of layers does not influence the sensor sensibility.

MALDI-TOF/MS analysis of archaebacterial lipids in lyophilized membranes dry-mixed with 9-aminoacridine.

A method of direct lipid analysis by MALDI mass spectrometry in intact membranes, without prior extraction/separation steps, is described. The purple membrane isolated from the extremely halophilic archaeon Halobacterium salinarum was selected as model membrane. Lyophilized purple membrane were grinded with 9-aminoacridine (9-AA) as dry matrix, and the powder mixture was crushed in a mechanical die press to form a thin pellet. Small pieces of the pellet were then attached to the MALDI target and directly analyzed. In parallel, individual archaebacterial phospholipids and glycolipids, together with the total lipid extract of the purple membrane, were analyzed by MALDI-TOF/MS using 9-AA as the matrix in solution. Results show that 9-AA represents a suitable matrix for the conventional MALDI-TOF/MS analysis of lipid extracts from archaeal microorganisms, as well as for fast and reliable direct dry lipid analysis of lyophilized archaebacterial membranes. This method might be of general application, offering the advantage of quickly gaining information about lipid components without disrupting or altering the membrane matrix.

Lipidomic analysis of porcine olfactory epithelial membranes and cilia.

The use of the matrix 9-aminoacridine has been recently introduced in matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry analysis of both anionic and cationic phospholipids. In the present study, we take advantage of this technique to analyze the lipids of porcine olfactory mucosa and a membrane fraction enriched in cilia. Thin-layer chromatography (TLC) and (31)P-NMR analyses of the lipid extracts were also performed in parallel. MALDI-TOF-MS allowed the identification of lipid classes in the total lipid extract and individual lipids present in the main TLC bands. The comparison between the composition of the two lipid extracts showed that: (1) cardiolipin, present in small amount in the whole olfactory mucosa lipid extract, was absent in the extract of membranes enriched in olfactory cilia, (2) phosphatidylethanolamine species were less abundant in ciliary than in whole epithelial membranes, (3) sulfoglycosphingolipids were detected in the lipid extract of ciliary membranes, but not in that of epithelial membranes. Our results indicate that the lipid pattern of ciliary membranes is different from that of whole-tissue membranes and suggest that olfactory receptors require a specific lipid environment for their functioning.

Tailoring density and optical and thermal behavior of gold surfaces and nanoparticles exploiting aromatic dithiols.

Self-assembled monolayers (SAMs) derived of 4-methoxy-terphenyl-3'',5''-dimethanethiol (TPDMT) and 4-methoxyterphenyl-4''-methanethiol (TPMT) have been prepared by chemisorption from solution onto gold thin films and nanoparticles. The SAMs have been characterized by spectroscopic ellipsometry, Raman spectroscopy and atomic force microscopy to determine their optical properties, namely the refractive index and extinction coefficient, in an extended spectral range of 0.75-6.5 eV. From the analysis of the optical data, information on SAMs structural organization has been inferred. Comparison of SAMs generated from the above aromatic thiols to well-known SAMs generated from the alkanethiol dodecanethiol revealed that the former aromatic SAMs are densely packed and highly vertically oriented, with a slightly higher packing density and a absence of molecular inclination in TPMT/Au. The thermal behavior of SAMs has also been monitored using ellipsometry in the temperature range 25-500 degrees C. Gold nanoparticles functionalized by the same aromatic thiols have also been discussed for surface enhanced Raman spectroscopy applications. This study represents a step forward tailoring the optical and thermal behavior of surfaces as well as nanoparticles.

Iridium(III) complexes with sulfonyl and fluorine substituents: synthesis, stereochemistry and effect of functionalisation on their photophysical properties.

The synthesis and photophysical and electrochemical characterisation of new heteroleptic iridium complexes with electron-withdrawing sulfonyl groups and fluorine atoms bound to phenylpyridine ligands are reported. The emission energy of these materials strongly depends on the position of the sulfonyl groups and on the number of fluorine substituents. A 90 nm wide tuning range of photoluminescence from the blue-green (lambda(em)=468 nm) of iridium(III)bis[2-(4'-benzylsulfonyl)phenylpyridinato-N,C2'][3-(pentafluorophenyl)-pyridin-2-yl-1,2,4-triazolate] to the orange (lambda(em)=558 nm) of iridium(III)bis[2-(3'-benzylsulfonyl)phenylpyridinato-N,C2'](2,4-decanedionate) has been achieved. Emission quantum yields ranging from 47 to 71% have also been found for degassed solutions of the complexes, and a surprisingly high value of 16% was recorded for iridium(III)bis[2-(5'-benzylsulfonyl-3',6'-difluoro)phenylpyridinato-N,C2'](2,4-decanedionate) in air-equilibrated dichloromethane. A unusual stereochemistry of the benzylsulfonyl-substituted dimer and heteroleptic complexes has been detected by (1)H NMR spectroscopy, and is characterised by the mutual cis disposition of the pyridyl nitrogen atoms of the phenylpyridine ligands, which differs from the most common trans arrangement reported in the literature.

A sensitivity-enhanced field-effect chiral sensor.

Organic thin-film transistor sensors have been recently attracting the attention of the plastic electronics community for their potential exploitation in novel sensing platforms. Specificity and sensitivity are however still open issues: in this respect chiral discrimination-being a scientific and technological achievement in itself--is indeed one of the most challenging sensor bench-tests. So far, conducting-polymer solid-state chiral detection has been carried out at part-per-thousand concentration levels. Here, a novel chiral bilayer organic thin-film transistor gas sensor--comprising an outermost layer with built-in enantioselective properties-is demonstrated to show field-effect amplified sensitivity that enables differential detection of optical isomers in the tens-of-parts-per-million concentration range. The ad-hoc-designed organic semiconductor endowed with chiral side groups, the bilayer structure and the thin-film transistor transducer provide a significant step forward in the development of a high-performance and versatile sensing platform compatible with flexible organic electronic technologies.

Synthesis of S-acetyl oligoarylenedithiols via Suzuki-Miyaura cross-coupling.

Oligoarylenes with three or four aromatic rings, bearing two S-acetylated mercaptomethyl groups in 1,3 position on one end of the polyaromatic system and presenting various functionalities on the other terminal ring, have been synthesized by the Suzuki-Miyaura cross-coupling reaction. The use of palladium complexes with a Buchwald's phosphine as ligand allowed us to perform this coupling reaction also in the presence of benzylic S-acetyl-protected functionalities on the aromatic halide. The obtained oligoarylenes are potential novel candidates for the generation of self-assembling monolayers on metal substrates.

A novel cyclization reaction between 2,3-bis(trimethylsilyl)buta-1,3-diene and acyl chlorides with straightforward formation of polysubstituted furans.

A novel cyclization process of 2,3-bis(trimethylsilyl)buta-1,3-diene with various acyl chlorides in the presence of aluminium trichloride affords 2,5-disubstituted or 2,3,5-trisubstituted furans in short reaction time; a subsequent acylation process of the furan ring occurs if the reaction time is prolonged.

Photochemical tuning of light emission in a conjugated polymer containing norbornadiene units in the main chain.

A conjugated alternating copolymer containing norbornadiene and bis(ethynylene)phenylene units was prepared by the Cassar-Heck-Sonogashira cross-coupling reaction. Its electroluminescence was tested in a device, and its fluorescence colour could be tuned by light-induced norbornadiene-quadricyclane isomerization.

Fluorinated organic materials for electronic and optoelectronic applications: the role of the fluorine atom.

In this article we highlight, by means of selected examples drawn from work performed in our or other laboratories, the features of some classes of fluorinated conjugated materials and their use in electronic devices such as electroluminescent diodes or field effect transistors. A variety of fluorinated conjugated systems, either molecular or polymeric, such as poly(phenylenevinylene)s, poly(phenyleneethynylene)s, polythiophenes, polyphenylenes, are dealt with. Attention is also focused on a different class of electroluminescent compounds, represented by the cyclometalated iridium complexes with various forms (mer and fac). In particular, fluorine atoms lower both the HOMO and LUMO energy levels. Consequently, the electron injection is made easier, the materials display a greater resistance against the degradative oxidation processes and organic n-type or ambipolar semiconducting materials may result. Moreover, the C-H...F interactions play an important role in the solid state supramolecular organization, originating a typical pi-stack arrangement which enhances the charge carrier mobility.

Novel sulfonolipid in the extremely halophilic bacterium Salinibacter ruber.

Salinibacter ruber is an extremely halophilic bacterium, phylogenetically affiliated with the Flavobacterium/Cytophaga branch of the domain Bacteria. Electrospray mass analyses (negative ion) of the total lipid extract of a pure culture of S. ruber shows a characteristic peak at m/z 660 as the most prominent peak in the high-mass range of the spectrum. A novel sulfonolipid, giving rise to the molecular ion [M-H]- of m/z 660, has been identified. The sulfonolipid isolated and purified by thin-layer chromatography was shown by chemical degradation, mass spectrometry, infrared spectroscopy, and nuclear magnetic resonance analysis to have the structure 2-carboxy-2-amino-3-O-(13'-methyltetradecanoyl)-4-hydroxy-18-methylnonadec-5-ene-1-sulfonic acid. This lipid represents about 10% of total cellular lipids, and it appears to be a structural variant of the sulfonolipids found as main components of the cell envelope of gliding bacteria of the genus Cytophaga and closely related genera (W. Godchaux and E. R. Leadbetter, J. Bacteriol. 153:1238-1246, 1983) and of diatoms (R. Anderson, M. Kates, and B. E. Volcani, Biochim. Biophys. Acta 528:89-106, 1978). Since this sulfonolipid has never been observed in any other extreme halophilic microorganism, we consider the peak at m/z 660 the lipid signature of Salinibacter. This study suggests that this novel sulfonolipid may be used as a chemotaxonomic marker for the detection of Salinibacter within the halophilic microbial community in saltern crystallizer ponds and other hypersaline environments.

Osmotic shock stimulates de novo synthesis of two cardiolipins in an extreme halophilic archaeon.

The present report illustrates the response to osmotic stress of an extreme halophilic archaeon, Halorubrum sp., isolated from the saltern ponds of Margherita di Savoia in southern Italy. The hypotonic stress induces relevant changes in the membrane lipid composition: archaeal cardiolipin content markedly increases, whereas phosphatidylglycerol (PG) decreases. Membranes isolated from this archaeon after cell disruption by osmotic shock are highly enriched in archaeal cardiolipin and reveal the presence of a novel phospholipid. Electrospray ionization mass spectrometry and NMR analyses revealed that this novel lipid has the structure of a sulfo-diglyco-diether-phosphatidic acid, i.e., a phospholipid dimer or a novel cardiolipin analogue. As NMR analyses showed that the sugars in the novel phospholipid dimer are the same and in the same order of a sulfated diglycosyl diphytanylglycerol diether (S-DGD-5) present as a major lipid component in the archaeon membranes, the novel phospholipid dimer was named S-DGD-5-PA. We conclude that osmotic shock induces a specific increase in the membrane content of the two cardiolipins and suggest that PG and S-DGD-5 are intermediates for the de novo synthesis of archaeal cardiolipin and S-DGD-5-PA, respectively.

Synthesis of poly(aryleneethynylene)s bearing glucose units as substituents.

A series of poly(aryleneethynylene)s functionalized with acetylated glucopyranosyl units were synthesized by the Pd-catalyzed reaction of trimethylsilylethynyl derivatives with aromatic halides in the presence of silver oxide.

Thin film construction and characterization and gas-sensing performances of a tailored phenylene-thienylene copolymer.

An alternating copolymer, poly(2,5-dioctyloxy-1,4-phenylene-alt-2,5-thienylene), has been synthesized and used in this research. The behavior of the floating film at the air-water interface has been investigated by measuring surface pressure versus area Langmuir isotherms and contemporaneously by reflection spectroscopy and Brewster angle microscopy. The floating films were transferred by the Langmuir-Schäfer (horizontal lifting) method onto various substrates. It is apparent from these analyses that the effective conjugation length is larger than those in other electroactive polymers and that a strong coplanarity and interchain association takes place above all in the floating film on the water surface and in the transferred multilayers. Such films were used as the active layers in resistive chemical gas sensor devices, thus revealing excellent sensitivity toward NO(2), reversibility, and time stability of the response.