Polarization-independent edge detection based on the spin-orbit interaction of light.

In previous edge detection schemes based on the spin-orbit interaction of light, the direction and intensity of the edge-enhanced images are influenced by the incident polarization state. In this study, we develop an edge detection strategy that is insensitive to changes in both the incident polarization and the incident angle. The output intensity and transfer function remain entirely impervious to changes in incident polarization, being explicitly formulated as functions of the incident angle, specifically in terms of cot 2⁡θ i and cot⁡θ i , respectively. This behavior is attributed to the opposing nature of the polarization components E~r H-H and E~r V-V in the x-direction after undergoing mapping through the Glan polarizer, while the sum of polarization components E~r H-V and E~r V-H in the y-direction can be simplified to terms independent of incident polarization. Furthermore, we propose a metasurface design to achieve the required optical properties in order to realize the derived edge detection scheme.

Tailoring high-refractive-index nanocomposites for manufacturing of ultraviolet metasurfaces.

Nanoimprint lithography (NIL) has been utilized to address the manufacturing challenges of high cost and low throughput for optical metasurfaces. To overcome the limitations inherent in conventional imprint resins characterized by a low refractive index (n), high-n nanocomposites have been introduced to directly serve as meta-atoms. However, comprehensive research on these nanocomposites is notably lacking. In this study, we focus on the composition of high-n zirconium dioxide (ZrO2) nanoparticle (NP) concentration and solvents used to produce ultraviolet (UV) metaholograms and quantify the transfer fidelity by the measured conversion efficiency. The utilization of 80 wt% ZrO2 NPs in MIBK, MEK, and acetone results in conversion efficiencies of 62.3%, 51.4%, and 61.5%, respectively, at a wavelength of 325 nm. The analysis of the solvent composition and NP concentration can further enhance the manufacturing capabilities of high-n nanocomposites in NIL, enabling potential practical use of optical metasurfaces.

Hydrogels for active photonics.

Conventional photonic devices exhibit static optical properties that are design-dependent, including the material's refractive index and geometrical parameters. However, they still possess attractive optical responses for applications and are already exploited in devices across various fields. Hydrogel photonics has emerged as a promising solution in the field of active photonics by providing primarily deformable geometric parameters in response to external stimuli. Over the past few years, various studies have been undertaken to attain stimuli-responsive photonic devices with tunable optical properties. Herein, we focus on the recent advancements in hydrogel-based photonics and micro/nanofabrication techniques for hydrogels. In particular, fabrication techniques for hydrogel photonic devices are categorized into film growth, photolithography (PL), electron-beam lithography (EBL), and nanoimprint lithography (NIL). Furthermore, we provide insights into future directions and prospects for deformable hydrogel photonics, along with their potential practical applications.

Spin-Selective Angular Dispersion Control in Dielectric Metasurfaces for Multichannel Meta-Holographic Displays.

Angle-dependent next-generation displays have potential applications in 3D stereoscopic and head-mounted displays, image combiners, and encryption for augmented reality (AR) and security. Metasurfaces enable such exceptional functionalities with groundbreaking achievements in efficient displays over the past decades. However, limitations in angular dispersion control make them unfit for numerous nanophotonic applications. Here, we propose a spin-selective angle-dependent all-dielectric metasurface with a unique design strategy to manifest distinct phase information at different incident angles of light. As a proof of concept, the phase masks of two images are encoded into the metasurface and projected at the desired focal plane under different angles of left circularly polarized (LCP) light. Specifically, the proposed multifunctional metasurface generates two distinct holographic images under LCP illumination at angles of +35 and -35°. The presented holographic displays may provide a feasible route toward multifunctional meta-devices for potential AR displays, encrypted imaging, and information storage applications.

Trichannel Spin-Selective Metalenses.

Metalenses have the potential to revolutionize optical devices into the next generation of consumer devices. Through new inventive strategies, metalenses with advanced functionalities have been released to integrate multiple responses into a single flat device. Here, we design metalenses that are sensitive to the incident spin angular momentum to provide three distinct modes based on the handedness of the incident and transmitted light. Propagation phase is employed to encode a hyperbolic lens phase to the metalens, while geometric phase is exploited for additional spin-selective properties. We experimentally demonstrate two different metalenses: the co-polarized channels function as a standard metalens, while the cross-polarized channels (1) deflect and (2) introduce orbital angular momentum to the transmitted light. We experimentally characterize the metalenses and prove their use for spin-selective imaging of visible light. We envision that such trichannel metalenses could be employed in chiral bioimaging, optical computing, and computer vision.

Bright-Field and Edge-Enhanced Imaging Using an Electrically Tunable Dual-Mode Metalens.

The imaging of microscopic biological samples faces numerous difficulties due to their small feature sizes and low-amplitude contrast. Metalenses have shown great promise in bioimaging as they have access to the complete complex information, which, alongside their extremely small and compact footprint and potential to integrate multiple functionalities into a single device, allow for miniaturized microscopy with exceptional features. Here, we design and experimentally realize a dual-mode metalens integrated with a liquid crystal cell that can be electrically switched between bright-field and edge-enhanced imaging on the millisecond scale. We combine the concepts of geometric and propagation phase to design the dual-mode metalens and physically encode the required phase profiles using hydrogenated amorphous silicon for operation at visible wavelengths. The two distinct metalens phase profiles include (1) a conventional hyperbolic metalens for bright-field imaging and (2) a spiral metalens with a topological charge of +1 for edge-enhanced imaging. We demonstrate the focusing and vortex generation ability of the metalens under different states of circular polarization and prove its use for biological imaging. This work proves a method for in vivo observation and monitoring of the cell response and drug screening within a compact form factor.

One-step printable platform for high-efficiency metasurfaces down to the deep-ultraviolet region.

A single-step printable platform for ultraviolet (UV) metasurfaces is introduced to overcome both the scarcity of low-loss UV materials and manufacturing limitations of high cost and low throughput. By dispersing zirconium dioxide (ZrO2) nanoparticles in a UV-curable resin, ZrO2 nanoparticle-embedded-resin (nano-PER) is developed as a printable material which has a high refractive index and low extinction coefficient from near-UV to deep-UV. In ZrO2 nano-PER, the UV-curable resin enables direct pattern transfer and ZrO2 nanoparticles increase the refractive index of the composite while maintaining a large bandgap. With this concept, UV metasurfaces can be fabricated in a single step by nanoimprint lithography. As a proof of concept, UV metaholograms operating in near-UV and deep-UV are experimentally demonstrated with vivid and clear holographic images. The proposed method enables repeat and rapid manufacturing of UV metasurfaces, and thus will bring UV metasurfaces more close to real life.

Ultraviolet-Visible Multifunctional Vortex Metaplates by Breaking Conventional Rotational Symmetry.

Metasurfaces have shown remarkable potential to manipulate many of light's intrinsic properties, such as phase, amplitude, and polarization. Recent advancements in nanofabrication technologies and persistent efforts from the research community result in the realization of highly efficient, broadband, and multifunctional metasurfaces. Simultaneous control of these characteristics in a single-layered metasurface will be an apparent technological extension. Here, we demonstrate a broadband multifunctional metasurface platform with the unprecedented ability to independently control the phase profile for two orthogonal polarization states of incident light over dual-wavelength spectra (ultraviolet to visible). In this work, multiple single-layered metasurfaces composed of bandgap-engineered silicon nitride nanoantennas are designed, fabricated, and optically characterized to demonstrate broadband multifunctional light manipulation ability, including structured beam generation and meta-interferometer implementation. We envision the presented metasurface platform opening new avenues for broadband multifunctional applications including ultraviolet-visible spectroscopy, spatially modulated illumination microscopy, optical data storage, and information encoding.

Humidity-Responsive RGB-Pixels via Swelling of 3D Nanoimprinted Polyvinyl Alcohol.

Humidity-responsive structural coloration is actively investigated to realize real-time humidity sensors for applications in smart farming, food storage, and healthcare management. Here, humidity-tunable nano pixels are investigated with a 700 nm resolution that demonstrates full standard RGB (sRGB) gamut coverage with a millisecond-response time. The color pixels are designed as Fabry-Pérot (F-P) etalons which consist of an aluminum mirror substrate, humidity-responsive polyvinyl alcohol (PVA) spacer, and a top layer of disordered silver nanoparticles (NPs). The measured volume change of the PVA reaches up to 62.5% when the relative humidity (RH) is manipulated from 20 to 90%. The disordered silver NP layer permits the penetration of water molecules into the PVA layer, enhancing the speed of absorption and swelling down to the millisecond level. Based on the real-time response of the hydrogel-based F-P etalons with a high-throughput 3D nanoimprint technique, a high-resolution multicolored color print that can have potential applications in display technologies and optical encryption, is demonstrated.

Multicolor and 3D Holography Generated by Inverse-Designed Single-Cell Metasurfaces.

Metasurface-generated holography has emerged as a promising route for fully reproducing vivid scenes by manipulating the optical properties of light using ultra-compact devices. However, achieving multiple holographic images using a single metasurface is still difficult due to the capacity limit of a single meta-atom. In this work, an inverse design method based on gradient-descent optimization is presented to encode multiple pieces of holographic information into a single metasurface. The proposed method allows the inverse design of single-cell metasurfaces without the need for complex meta-atom design strategies, facilitating high-throughput fabrication using broadband low-loss materials. By exploiting the proposed design method, both multiplane red-green-blue (RGB) color and three-dimensional (3D) holograms are designed and experimentally demonstrated. Multiplane RGB color holograms with nine distinct holograms are achieved, which demonstrate the state-of-the-art data capacity of a phase-only metasurface. The first experimental demonstration of metasurface-generated 3D holograms with completely independent and distinct images in each plane is also presented. The current research findings provide a viable route for practical metasurface-generated holography by demonstrating the high-density holography produced by a single metasurface. It is expected to ultimately lead to optical storage, display, and full-color imaging applications.

Tunable metasurfaces via the humidity responsive swelling of single-step imprinted polyvinyl alcohol nanostructures.

The application of hydrogels in nanophotonics has been restricted due to their low fabrication feasibility and refractive index. Nevertheless, their elasticity and strength are attractive properties for use in flexible, wearable-devices, and their swelling characteristics in response to the relative humidity highlight their potential for use in tunable nanophotonics. We investigate the use of nanostructured polyvinyl alcohol (PVA) using a one-step nanoimprinting technique for tunable and erasable optical security metasurfaces with multiplexed structural coloration and metaholography. The resolution of the PVA nanoimprinting reaches sub-100 nm, with aspect ratios approaching 10. In response to changes in the relative humidity, the PVA nanostructures swell by up to ~35.5%, providing precise wavefront manipulation of visible light. Here, we demonstrate various highly-secure multiplexed optical encryption metasurfaces to display, hide, or destroy encrypted information based on the relative humidity both irreversibly and reversibly.

Metasurface-driven full-space structured light for three-dimensional imaging.

Structured light (SL)-based depth-sensing technology illuminates the objects with an array of dots, and backscattered light is monitored to extract three-dimensional information. Conventionally, diffractive optical elements have been used to form laser dot array, however, the field-of-view (FOV) and diffraction efficiency are limited due to their micron-scale pixel size. Here, we propose a metasurface-enhanced SL-based depth-sensing platform that scatters high-density ~10 K dot array over the 180° FOV by manipulating light at subwavelength-scale. As a proof-of-concept, we place face masks one on the beam axis and the other 50° apart from axis within distance of 1 m and estimate the depth information using a stereo matching algorithm. Furthermore, we demonstrate the replication of the metasurface using the nanoparticle-embedded-resin (nano-PER) imprinting method which enables high-throughput manufacturing of the metasurfaces on any arbitrary substrates. Such a full-space diffractive metasurface may afford ultra-compact depth perception platform for face recognition and automotive robot vision applications.

Thermally-curable nanocomposite printing for the scalable manufacturing of dielectric metasurfaces.

Metasurfaces consisting of artificially designed meta-atoms have been popularized recently due to their advantages of amplitude and phase of light control. However, the electron beam lithography method for metasurface fabrication has high cost and low throughput, which results in a limitation for the fabrication of metasurfaces. In this study, nanocomposite printing technology is used to fabricate high-efficiency metasurfaces with low cost. To demonstrate the efficiency of the proposed fabrication method, a metahologram is designed and fabricated using a nanocomposite. The metahologram exhibits conversion efficiencies of 48% and 35% at wavelengths of 532 and 635 nm, respectively. The nanocomposite is composed of polymers with nanoparticles, so durability tests are also performed to evaluate the effects of temperature and humidity on the metasurfaces. The test verifies that at temperatures below the glass transition temperature of the base resin, the nanostructures do not collapse, so the efficiency of the metasurfaces remains almost the same. The surrounding humidity does not affect the nanostructures at all. Hence, the durability of the nanocomposite metasurfaces can be further enhanced by replacing the base resin, and this nanocomposite printing method will facilitate practical metasurface use at low cost.

Single-Step Fabricable Flexible Metadisplays for Sensitive Chemical/Biomedical Packaging Security and Beyond.

Secure packaging and transportation of light-sensitive chemical and biomedical test tubes are crucial for environmental protection and public health. Benefiting from the compact form factor and high efficiency of optical metasurfaces, we propose a broad-band polarization-insensitive flexible metasurface for the security of sensitive packages in the transport industry. We employ both the propagation and the geometric phase of novel TiO2 resin-based anisotropic nanoresonators to demonstrate a flexible and broad-band polarization-insensitive metasurface in the visible domain. The ultraviolet nanoimprint lithographic technique (UV-NIL) is used to fabricate high-index TiO2 nanoparticle-embedded-resin (nano-PER) structures that are patterned on a flexible substrate. This novel approach provides swift single-step fabrication without secondary fabrication steps such as deposition and etching. Moreover, replicating and transforming patterns over flexible substrates make the proposed technique highly suitable for large-throughput commercial manufacturing. As the proposed metahologram manifests high transmission efficiency in the visible domain, such flexible metaholographic platforms could find several exciting applications in bendable/curved displays, wearable devices, and holographic labeling for interactive displays.

Three-Dimensional Plasmonic Nanocluster-Driven Light-Matter Interaction for Photoluminescence Enhancement and Picomolar-Level Biosensing.

Plasmonic nanoparticle clusters promise to support unique engineered electromagnetic responses at optical frequencies, realizing a new concept of devices for nanophotonic applications. However, the technological challenges associated with the fabrication of three-dimensional nanoparticle clusters with programmed compositions remain unresolved. Here, we present a novel strategy for realizing heterogeneous structures that enable efficient near-field coupling between the plasmonic modes of gold nanoparticles and various other nanomaterials via a simple three-dimensional coassembly process. Quantum dots embedded in the plasmonic structures display ∼56 meV of a blue shift in the emission spectrum. The decay enhancement factor increases as the total contribution of radiative and nonradiative plasmonic modes increases. Furthermore, we demonstrate an ultracompact diagnostic platform to detect M13 viruses and their mutations from femtoliter volume, sub-100 pM analytes. This platform could pave the way toward an effective diagnosis of diverse pathogens, which is in high demand for handling pandemic situations.

Liquid crystal-powered Mie resonators for electrically tunable photorealistic color gradients and dark blacks.

Taking inspiration from beautiful colors in nature, structural colors produced from nanostructured metasurfaces have shown great promise as a platform for bright, highly saturated, and high-resolution colors. Both plasmonic and dielectric materials have been employed to produce static colors that fulfil the required criteria for high-performance color printing, however, for practical applications in dynamic situations, a form of tunability is desirable. Combinations of the additive color palette of red, green, and blue enable the expression of further colors beyond the three primary colors, while the simultaneous intensity modulation allows access to the full color gamut. Here, we demonstrate an electrically tunable metasurface that can represent saturated red, green, and blue pixels that can be dynamically and continuously controlled between on and off states using liquid crystals. We use this to experimentally realize ultrahigh-resolution color printing, active multicolor cryptographic applications, and tunable pixels toward high-performance full-color reflective displays.

Nanostructured chromium-based broadband absorbers and emitters to realize thermally stable solar thermophotovoltaic systems.

The efficiency of traditional solar cells is constrained due to the Shockley-Queisser limit, to circumvent this theoretical limit, the concept of solar thermophotovoltaics (STPVs) has been introduced. The typical design of an STPV system consists of a wideband absorber with its front side facing the sun. The back of this absorber is physically attached to the back of a selective emitter facing a low-bandgap photovoltaic (PV) cell. We demonstrate an STPV system consisting of a wideband absorber and emitter pair achieving a high absorptance of solar radiation within the range of 400-1500 nm (covering the visible and infrared regions), whereas the emitter achieves an emittance of >95% at a wavelength of 2.3 µm. This wavelength corresponds to the bandgap energy of InGaAsSb (0.54 eV), which is the targeted PV cell technology for our STPV system design. The material used for both the absorber and the emitter is chromium due to its high melting temperature of 2200 K. An absorber and emitter pair is also fabricated and the measured results are in agreement with the simulated results. The design achieves an overall solar-to-electrical simulated efficiency of 21% at a moderate temperature of 1573 K with a solar concentration of 3000 suns. Furthermore, an efficiency of 15% can be achieved at a low temperature of 873 K with a solar concentration of 500 suns. The designs are also insensitive to polarization and show negligible degradation in solar absorptance and thermal emittance with a change in the angle of incidence.

Three-dimensional artificial chirality towards low-cost and ultra-sensitive enantioselective sensing.

Artificial chiral structures have potential applications in the field of enantioselective signal sensing. Advanced nanofabrication methods enable a large diversity in geometric structures and broad selectivity of materials, which can be exploited to manufacture artificial three-dimensional chiral structures. Various chiroptical phenomena exploiting spin and orbital angular momentum at the nanoscale have been continuously exploited as a way to effectively detect enantiomers. This review introduces precisely controlled bottom-up and large-area top-down metamaterial fabrication methods to solve the limitations of high manufacturing cost and low production speed. Particle synthesis, self-assembly, glanced angled vapor deposition, and three-dimensional plasmonic nanostructure printing are introduced. Furthermore, emerging sensitive chiral sensing methods such as cavity-enhanced chirality, photothermal circular dichroism, and helical dichroism of single particles are discussed. The continuous progress of nanofabrication technology presents the strong potential for developing artificial chiral structures for applications in biomedical, pharmaceutical, nanophotonic systems.