Novel Porous Organic Polymer Catalyst with Phosphate and Sulfonic Acid Sites for Facile Esterification of Levulinic Acid.

Biomass-derived value-added materials such as levulinic acid (LA) are favorable natural resources for producing ester-based biolubricants owing to their biodegradability, nontoxicity, and excellent metal-adhering properties. However, highly active catalysts must be developed to carry out efficient esterification of LA with aliphatic alcohols, especially long-chain aliphatic alcohols. In this study, we developed a novel porous covalent organic polymer catalyst (BPOP-SO3H) with dual acid sites, phosphate and sulfonic acid sites, for the esterification of LA. The prepared BPOP-SO3H catalyst was verified using various surface analysis techniques. BPOP-SO3H exhibited 98% LA conversion with n-butanol and 99% selectivity for butyl levulinate ester within 30 min, which is superior to that of most reported catalysts. BPOP-SO3H also showed high LA conversion and ester selectivity when other aliphatic alcohols were used. Moreover, BPOP-SO3H showed good recyclability for five consecutive cycles. We believe that incorporating a high density of acid sites into a porous polymer with a large surface area and hierarchical pores is a promising approach for developing heterogeneous acid catalysts for the production of alkyl levulinate esters from LA.

Polymer-Infiltrated Metal-Organic Frameworks for Thin-Film Composite Mixed-Matrix Membranes with High Gas Separation Properties.

Thin-film composite mixed-matrix membranes (TFC-MMMs) have potential applications in practical gas separation processes because of their high permeance (gas flux) and gas selectivity. In this study, we fabricated a high-performance TFC-MMM based on a rubbery comb copolymer, i.e., poly(2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl] ethyl methacrylate)-co-poly(oxyethylene methacrylate) (PBE), and metal-organic framework MOF-808 nanoparticles. The rubbery copolymer penetrates through the pores of MOF-808, thereby tuning the pore size. In addition, the rubbery copolymer forms a defect-free interfacial morphology with polymer-infiltrated MOF-808 nanoparticles. Consequently, TFC-MMMs (thickness = 350 nm) can be successfully prepared even with a high loading of MOF-808. As polymer-infiltrated MOF is incorporated into the polymer matrix, the PBE/MOF-808 membrane exhibits a significantly higher CO2 permeance (1069 GPU) and CO2/N2 selectivity (52.7) than that of the pristine PBE membrane (CO2 permeance = 431 GPU and CO2/N2 selectivity = 36.2). Therefore, the approach considered in this study is suitable for fabricating high-performance thin-film composite membranes via polymer infiltration into MOF pores.

High-Performance Adsorbent for Ethane/Ethylene Separation Selected through the Computational Screening of Aluminum-Based Metal-Organic Frameworks.

The development of a high-performance ethane (C2H6)-selective adsorbent for the separation of ethane/ethylene (C2H6/C2H4) gas mixtures has been investigated for high-efficiency adsorption-based gas separation. Herein, we investigated Al-based metal-organic frameworks (MOFs) to identify an efficient C2H6-selective adsorbent (CAU-11), supported by a computational simulation study. CAU-11 exhibited numerous advantageous properties (such as low material cost, structural robustness, high reaction yield, and high C2H6/C2H4 selectivity) compared to other Al-based MOFs, indicating immense potential as a C2H6-selective adsorbent. CAU-11 exhibited preferential C2H6 adsorption in single-component gas adsorption experiments, and its predicted ideal adsorption solution theory selectivity of C2H6/C2H4 was over 2.1, consistent with the simulation analysis. Dynamic breakthrough experiments using representative compositions of the C2H6/C2H4 gas mixture confirmed the excellent separation ability of CAU-11; it produced high-purity C2H4 (>99.95%) with productivity values of 0.79 and 2.02 mol L-1 while repeating the cyclic experiment with 1:1 and 1:15 v/v C2H6/C2H4 gas mixtures, respectively, at 298 K and 1 bar. The high C2H6/C2H4 separation ability of CAU-11 could be attributed to its non-polar pore environment and optimum pore dimensions which strengthen the interaction of its pores (via C-H···π interactions) with C2H6 to a greater extent than with C2H4.

Discovery of High-Performing Metal-Organic Frameworks for On-Board Methane Storage and Delivery via LNG-ANG Coupling: High-Throughput Screening, Machine Learning, and Experimental Validation.

Liquefied natural gas (LNG) gasification coupled with adsorbed natural gas (ANG) charging (LNG-ANG coupling) is an emerging strategy for efficient delivery of natural gas. However, the potential of LNG-ANG to attain the advanced research projects agency-energy (ARPA-E) target for onboard methane storage has not been fully investigated. In this work, large-scale computational screening is performed for 5446 metal-organic frameworks (MOFs), and over 193 MOFs whose methane working capacities exceed the target (315 cm3 (STP) cm-3 ) are identified. Furthermore, structure-performance relationships are realized under the LNG-ANG condition using a machine learning method. Additional molecular dynamics simulations are conducted to investigate the effects of the structural changes during temperature and pressure swings, further narrowing down the materials, and two synthetic targets are identified. The synthesized DUT-23(Cu) and DUT-23(Co) show higher working capacities (≈373 cm3 (STP) cm-3 ) than that of any other porous material under ANG or LNG-ANG conditions, and excellent stability during cyclic LNG-ANG operation.

Novel benzylphosphate-based covalent porous organic polymers for the effective capture of rare earth elements from aqueous solutions.

It has been a major challenge to develop stable and cost-effective porous materials that efficiently recover heavy rare earth elements (HREEs) due to ever-increasing demand, low availability and high cost of HREEs. This study presents two novel benzylphosphate-based covalent porous organic polymers (BPOP-1 and BPOP-2) that were prepared by facile one-pot Friedel-Crafts reactions. Various analytical techniques are used to investigate the successful syntheses of BPOP materials and establish their material properties, which include an unusual crystalline nature, large surface area, hierarchical pore structure, and superior chemical stabilities. The BPOPs effectively adsorb, and thus remove HREEs from aqueous media. In particular, BPOP-1 had higher phosphate content and exhibits superior adsorption capacities (Eu3+: 289.5; Gd3+: 292.7; Tb3+: 294.4; Dy3+: 301.9 mg/g) than BPOP-2, while BPOP-2 had higher mesoporosity and correspondingly supports faster adsorption kinetics. Remarkably, both BPOP materials exhibit some of the highest HREE adsorption capacities reported to date, the selective capture of Dy3+ ions, and excellent cyclic adsorption/desorption properties. We provide a potential adsorption mechanism for Dy3+ capture by the BPOP adsorbent. These demonstrate that introducing phosphate functionality into a robust porous polymer backbone with high surface area is a promising strategy for selective HREEs capture from wastewater.

Comparison between Fe2O3/C and Fe3C/Fe2O3/Fe/C Electrocatalysts for N2 Reduction in an Alkaline Electrolyte.

Cost-effective and nonprecious iron-based catalysts were synthesized, evaluated, and compared for electrocatalytic N2 reduction reaction (NRR) under alkaline conditions in the potential range from -0.4 to 0.1 V [vs reversible hydrogen electrode (RHE)] at low temperature (≤60 °C) and atmospheric pressure. The tested H-type cell was separated by an anion exchange membrane in 6 M KOH alkaline electrolyte (pH = over 14) in order to minimize hydrogen evolution reaction and to directly form NH3 gas. The amount of ammonia synthesized was quantified using an indophenol blue method and cross-checked with 1H nuclear magnetic resonance spectroscopy and ion chromatography using both 14N2 and 15N2 gases. Because of the synergistic effect between the Fe3C, Fe2O3, and Fe composites in the NRR, both the ammonia formation rate and faradaic efficiency in Fe3C/Fe2O3/Fe/C were approximately fourfold higher than those in Fe2O3/C at 60 °C and 0.1 V (vs RHE). These results can provide insights into designing Fe-based electrocatalysts for NRR at atmospheric pressure.

Positional Installation of Unsymmetrical Fluorine Functionalities onto Metal-Organic Frameworks for Efficient Carbon Dioxide Separation under Humid Conditions.

Unsymmetrical trifluoro functional groups were installed onto metal-organic frameworks (MOFs) at positions regulated by ligand exchange for efficient CO2 separation under humid conditions. These trifluoro groups induced molecular separation via dipole-dipole interactions. Their installation onto amino-functionalized MOF surfaces produced hydrophobic and CO2-philic core-shell MOFs for efficient CO2 adsorption.

The Origin of p-Xylene Selectivity in a DABCO Pillar-Layered Metal-Organic Framework: A Combined Experimental and Computational Investigation.

We report high experimental p-xylene (pX) selectivity in a pillar-layered metal-organic framework, DUT-8(Cu). Vapor- and liquid-phase adsorption experiments were carried out to confirm high pX selectivity and large pX uptakes in DUT-8(Cu). Grand canonical Monte Carlo simulation results show that the presence of DABCO ligands allows for the packing of pX molecules and is responsible for the pX selective nature of the material. The simulation also suggests that the presence of isooctane solvents in the liquid-phase experiments plays an essential role by lowering the adsorption of other xylene isomers, and leads to increased pX selectivity in the liquid-phase as compared to the vapor phase. Density functional theory simulations show that the preferential arrangement is due to the preferential adsorption of pX on the DABCO ligand and the preferential adsorption of isooctane over other xylene isomers.

Synergistic Effects of Various Ceramic Fillers on Thermally Conductive Polyimide Composite Films and Their Model Predictions.

In this study, thermally conductive composite films were fabricated using an anisotropic boron nitride (BN) and hybrid filler system mixed with spherical aluminum nitride (AlN) or aluminum oxide (Al2O3) particles in a polyimide matrix. The hybrid system yielded a decrease in the through-plane thermal conductivity, however an increase in the in-plane thermal conductivity of the BN composite, resulting from the horizontal alignment and anisotropy of BN. The behavior of the in-plane thermal conductivity was theoretically treated using the Lewis⁻Nielsen and modified Lewis⁻Nielsen theoretical prediction models. A single-filler system using BN exhibited a relatively good fit with the theoretical model. Moreover, a hybrid system was developed based on two-population approaches, the additive and multiplicative. This development represented the first ever implementation of two different ceramic conducting fillers. The multiplicative-approach model yielded overestimated thermal conductivity values, whereas the additive approach exhibited better agreement for the prediction of the thermal conductivity of a binary-filler system.

Coordinative Reduction of Metal Nodes Enhances the Hydrolytic Stability of a Paddlewheel Metal-Organic Framework.

Enhancement of hydrolytic stability of metal-organic frameworks (MOFs) is a challenging issue in MOF chemistry because most MOFs have shown limitations in their applications under a humid environment. Meanwhile, inner sphere electron transfer has constituted one of the most intensively studied subjects in contemporary chemistry. In this report, we show, for the first time, a new conceptual coordinative reduction of Cu2+ ion, which is realized in a paddlewheel MOF, HKUST-1, with a postsynthetic manner via inner sphere "single" electron transfer from hydroquinone (H2Q) to Cu2+ through its coordination bond. H2Q treatment of HKUST-1 under anhydrous conditions leads to the single charge (1+) reduction of approximately 30% of Cu2+ ions. Thus, this coordinative reduction is an excellent reduction process to be self-controlled in both oxidation state and quantity. As described below, once Cu2+ ions are reduced to Cu+, the reduction reaction does not proceed further, in terms of their oxidation state as well as their amount. Also, we demonstrate that a half of the Cu+ ions (about 15%) remains in paddlewheel framework with pseudo square planar geometry and the other half of the Cu+ ions (about 15%) forms [Cu(MeCN)4]+ complex in a small cage in the fashion of a ship-in-a-bottle after dissociation from the framework. Furthermore, we show that the coordinative reduction results in substantial enhancement of the hydrolytic stability of HKUST-1 to the extent that its structure remains intact even after exposure to humid air for two years.

Selective separation of Xe/Kr and adsorption of water in a microporous hydrogen-bonded organic framework.

We have studied the adsorption properties of Xe and Kr in a highly microporous hydrogen-bonded organic framework based on 1,3,5-tris(4-carboxyphenyl)benzene, named HOF-BTB. HOF-BTB can reversibly adsorb both noble gases, and it shows a higher affinity for Xe than Kr. At 1 bar, the adsorption amounts of Xe were 3.37 mmol g-1 and 2.01 mmol g-1 at 273 K and 295 K, respectively. Ideal adsorbed solution theory (IAST) calculation predicts selective separation of Xe over Kr from an equimolar binary Xe/Kr mixture, and breakthrough experiments demonstrate the efficient separation of Xe from the Xe/Kr mixture under a dynamic flow condition. Consecutive breakthrough experiments with simple regeneration treatment at 298 K reveal that HOF-BTB would be an energy-saving adsorbent in an adsorptive separation process, which could be attributed to the relatively low isosteric heat (Q st) of adsorption of Xe. The activated HOF-BTB is very stable in both water and aqueous acidic solutions for more than one month, and it also shows a well-preserved crystallinity and porosity upon water/acid treatment. Besides, HOF-BTB adsorbs about 30.5 wt%, the highest value for HOF materials, of water vapor during the adsorption-desorption cycles, with a 19% decrease in adsorption amounts of water vapor after five cycles.

Efficient separation of C2 hydrocarbons in a permanently porous hydrogen-bonded organic framework.

A highly robust porous hydrogen-bonded organic framework (HOF) constructed by 4,4',4''-benzene-1,3,5-triyl-tris(benzoic acid) not only achieves the highest uptakes of ethylene and ethane among the HOF materials, but also exhibits unusual adsorption selectivity of C2H6 over other C2 gases. Besides, it exhibits the second highest acetylene uptake among all the reported HOF materials.

Observation of Olefin/Paraffin Selectivity in Azo Compound and Its Application into a Metal-Organic Framework.

Olefin/paraffin separation is an important and challenging issue because the two molecules have similar physicochemical properties. Although a couple of olefin adsorbents have been developed by introducing inorganic nanoparticles into metal-organic frameworks (MOFs), there has been no study on the development of an olefin adsorbent by introducing a certain organic functional group into a MOF. In this study, we posited that azo compounds could offer olefin/paraffin selectivity. We have revealed using first-principles calculations that the simplest aromatic azo compound (azobenzene, Azob) has an unusual propylene/propane selectivity due to special electrostatic interactions between Azob and propylene molecules. On the basis of this interesting discovery, we have synthesized a novel propylene adsorbent, MIL-101(Cr)_DAA, by grafting 4,4'-diaminoazobenzene (DAA) into open metal sites in a mesoporous MIL-101(Cr). Remarkably, MIL-101(Cr)_DAA exhibited enhanced propylene/propane selectivity as well as considerably higher propylene heat of adsorption compared to pristine MIL-101(Cr) while maintaining the high working capacity of MIL-101(Cr). This clearly indicates that azo compounds when introduced into MOFs can provide propylene selectivity. Moreover, MIL-101(Cr)_DAA showed good C3H6/C3H8 separation and easy regeneration performances from packed-bed breakthrough experiments and retained its propylene adsorption capacity even after exposure to air for 12 h. As far as we know, this is the first study that improves the olefin selectivity of MOF by postsynthetically introducing an organic functional group.

Highly selective adsorption of CO over CO2 in a Cu(I)-chelated porous organic polymer.

Cu(I) species were successfully chelated to nitrogen atoms in a nitrogen-rich porous organic polymer (SNW-1) by mixing with a CuCl solution (Scheme 1). Although pristine SNW-1 adsorbs CO2 better than CO, Cu(I)-incorporated SNW-1 (nCu(I)@SNW-1) shows selective CO adsorption over CO2 because of the π-complexation of CO with Cu(I). To the best of our knowledge, this is the first CO/CO2 selectivity observed for POP-based materials. 1.3Cu(I)@SNW-1 exhibits high CO/CO2 selectivity (23) at 1bar and a large CO working capacity (0.6mmol/g) at 0.1-1bar. Moreover, the breakthrough and thermogravimetric experiments show that 1.3Cu(I)@SNW-1 can effectively separate CO from CO2 under dynamic mixture conditions and can be easily regenerated under mild regeneration conditions without heating the column. Furthermore, 1.3Cu(I)@SNW-1 exhibited a good stability under exposure to atmospheric air for 3h or 9h. These results suggest that chelating Cu(I) species to a nitrogen-rich porous organic polymer can be an efficient strategy to separate and recover CO from CO/CO2 mixtures.

Power partial-discard strategy to obtain improved performance for simulated moving bed chromatography.

A novel power partial-discard (PPD) strategy was developed as a variant of the partial-discard (PD) operation to further improve the separation performance of the simulated moving bed (SMB) process. The PPD operation varied the flow rates of discard streams by introducing a new variable, the discard amount (DA) as well as varying the reported variable, discard length (DL), while the conventional PD used fixed discard flow rates. The PPD operations showed significantly improved purities in spite of losses in recoveries. Remarkably, the PPD operation could provide more enhanced purity for a given recovery or more enhanced recovery for a given purity than the PD operation. The two variables, DA and DL, in the PPD operation played a key role in achieving the desired purity and recovery. The PPD operations will be useful for attaining high-purity products with reasonable recoveries.

Synthesis of a Zr-Based Metal-Organic Framework with Spirobifluorenetetrabenzoic Acid for the Effective Removal of Nerve Agent Simulants.

A new microporous Zr(IV)-based metal-organic framework (MOF) containing 4,4',4″,4‴-(9,9'-spirobi[fluorene]-2,2',7,7'-tetrayl)tetrabenzoic acid (Spirof-MOF) was synthesized, characterized, and size-controlled for the adsorption and decomposition of a nerve agent simulant, dimethyl 4-nitrophenylphosphate (DMNP). Spirof-MOF showed a hydrolysis half-life (t1/2) of 7.5 min to DMNP, which was confirmed by using in situ 31P NMR spectroscopy. Additionally, size-controlled Spirof-MOFb (∼1 µm) exhibited a half-life of 1.8 min and 99% removal within 18 min for DMNP. The results show that Spirof-MOF is a new active material in removing nerve agent simulants by adsorption and hydrolytic decomposition.

Selective nitrogen capture by porous hybrid materials containing accessible transition metal ion sites.

Selective dinitrogen binding to transition metal ions mainly covers two strategic domains: biological nitrogen fixation catalysed by metalloenzyme nitrogenases, and adsorptive purification of natural gas and air. Many transition metal-dinitrogen complexes have been envisaged for biomimetic nitrogen fixation to produce ammonia. Inspired by this concept, here we report mesoporous metal-organic framework materials containing accessible Cr(III) sites, able to thermodynamically capture N2 over CH4 and O2. This fundamental study integrating advanced experimental and computational tools confirmed that the separation mechanism for both N2/CH4 and N2/O2 gas mixtures is driven by the presence of these unsaturated Cr(III) sites that allows a much stronger binding of N2 over the two other gases. Besides the potential breakthrough in adsorption-based technologies, this proof of concept could open new horizons to address several challenges in chemistry, including the design of heterogeneous biomimetic catalysts through nitrogen fixation.

Adsorptive separation of xenon/krypton mixtures using a zirconium-based metal-organic framework with high hydrothermal and radioactive stabilities.

The separation of xenon/krypton mixtures is important for both environmental and industrial purposes. The potential of three hydrothermally stable MOFs (MIL-100(Fe), MIL-101(Cr), and UiO-66(Zr)) for use in Xe/Kr separation has been experimentally investigated. From the observed single-component Xe and Kr isotherms, isosteric heat of adsorption (Qsto), and IAST-predicted Xe/Kr selectivities, we observed that UiO-66(Zr) has the most potential as an adsorbent among the three candidate MOFs. We performed dynamic breakthrough experiments with an adsorption bed filled with UiO-66(Zr) to evaluate further the potential of UiO-66(Zr) for Xe/Kr separation under mixture flow conditions. Remarkably, the experimental breakthrough curves show that UiO-66(Zr) can efficiently separate the Xe/Kr mixture. Furthermore, UiO-66(Zr) maintains most of its Xe and Kr uptake capacity, as well as its crystallinity and internal surface area, even after exposure to gamma radiation (2kGy) for 7h and aging for 16 months under ambient conditions. This result indicates that UiO-66(Zr) can be considered to be a potential adsorbent for Xe/Kr mixtures under both ambient and radioactive conditions.

Review of Molecular Simulations of Methane Storage in Metal-Organic Frameworks.

Methane storage in porous materials is one of the hot issues because it can replace dangerous high-pressure compressed natural gas (CNG) tanks in natural gas vehicles. Among the diverse adsorbents, metal-organic frameworks (MOFs) are considered to be promising due to their extremely high surface areas and low crystal densities. Molecular simulation has been considered as an important tool for finding an appropriate MOF for methane storage. We review several important roles of molecular modeling for the studies of methane adsorption in MOFs.

High-temperature in situ crystallographic observation of reversible gas sorption in impermeable organic cages.

Crystallographic observation of adsorbed gas molecules is a highly difficult task due to their rapid motion. Here, we report the in situ single-crystal and synchrotron powder X-ray observations of reversible CO2 sorption processes in an apparently nonporous organic crystal under varying pressures at high temperatures. The host material is formed by hydrogen bond network between 1,3,5-tris-(4-carboxyphenyl)benzene (H3BTB) and N,N-dimethylformamide (DMF) and by π-π stacking between the H3BTB moieties. The material can be viewed as a well-ordered array of cages, which are tight packed with each other so that the cages are inaccessible from outside. Thus, the host is practically nonporous. Despite the absence of permanent pathways connecting the empty cages, they are permeable to CO2 at high temperatures due to thermally activated molecular gating, and the weakly confined CO2 molecules in the cages allow direct detection by in situ single-crystal X-ray diffraction at 323 K. Variable-temperature in situ synchrotron powder X-ray diffraction studies also show that the CO2 sorption is reversible and driven by temperature increase. Solid-state magic angle spinning NMR defines the interactions of CO2 with the organic framework and dynamic motion of CO2 in cages. The reversible sorption is attributed to the dynamic motion of the DMF molecules combined with the axial motions/angular fluctuations of CO2 (a series of transient opening/closing of compartments enabling CO2 molecule passage), as revealed from NMR and simulations. This temperature-driven transient molecular gating can store gaseous molecules in ordered arrays toward unique collective properties and release them for ready use.