Cost-effective 400-Gbps micro-intradyne coherent receiver using optical butt-coupling and FPCB wirings.

We present a cost-effective and bandwidth-enhanced 64-Gbaud micro-intradyne coherent receiver based on hybrid integration of InP waveguide-photodetector (WG-PD) and silica planar lightwave circuit (PLC). InP waveguide-photodetector (WG-PD) arrays are simply chip-to-chip bonded and optically butt-coupled to a silica-based dual-polarization optical hybrid chip. Multiple flexible printed circuit boards are adapted for electrical RF and DC wirings, which provide low-cost integration and good RF performance of the receiver. A 3-dB bandwidth of the fabricated coherent receiver is extended to ~36 GHz by optimization of bondwire inductance between the WG-PD array and the transimpedance amplifier (TIA), even when commercial TIAs with a typical bandwidth of ~29 GHz are used. Through optimization of the silica hybrid integrated coherent receiver, 64-Gbaud DP-16QAM signal transmission over 1050-km standard single-mode fiber is successfully demonstrated below a bit error rate of 2 × 10-3. This is the threshold for a soft decision-based forward error correction, at the optical signal to noise ratio of 23.8 dB.

Experimental filtering effect on the daylight operation of a free-space quantum key distribution.

One of the challenges of implementing free-space quantum key distribution (QKD) systems working in daylight is to remove unwanted background noise photons from sunlight. Elaborate elimination of background photons in the spectral, temporal, and spatial domains is an indispensable requirement to decrease the quantum bit error rate (QBER), which guarantees the security of the systems. However, quantitative effects of different filtering techniques and performance optimization in terms of the secure key rate have not been investigated. In this study, we quantitatively analyze how the performance of the QBER and the key rates changes for different combinations of filtering techniques in a free-space BB84 QKD system in daylight. Moreover, we optimize the conditions of filtering techniques in order to obtain the maximum secure key rate.

High-speed waveguide photodetector for 64 Gbaud coherent receiver.

A high-speed waveguide photodetector has been successfully fabricated for an integrated coherent receiver. Dual laterally tapered structures are introduced for a spot-size converter. We optimize the responsivity and the polarization-dependent loss of the spot-size converter-integrated waveguide photodetector through the beam propagation method simulation. The waveguide photodetector is designed with electrical as well as optical optimizations. The photodetector provides sufficient alignment tolerance, high responsivity of 0.73 A/W, and low polarization-dependent loss of 0.27 dB, which is in good agreement with the simulation results. By increasing the thickness of the matching layer and the n-doped upper taper, the electrical properties of the photodetector are enhanced. The photodetector has a 3 dB bandwidth of 45 GHz, providing high-speed operation. Through the electrical and optical optimizations, we successfully obtain the high-speed waveguide photodetector for a 64 Gbaud integrated coherent receiver.

A cost-effective 25-Gb/s EML TOSA using all-in-one FPCB wiring and metal optical bench.

We present a cost-effective 25-Gb/s electro-absorption modulator integrated laser (EML) transmitter optical sub-assembly (TOSA) using all-in-one flexible printed circuit board (FPCB) wiring and a metal optical bench (MOB). For a low cost and high bandwidth TOSA, internal and external wirings and feed-through of the TOSA to transmit radio-frequency (RF) signal are configured all-in-one using the FPCB. The FPCB is extended from an exterior of the TOSA package up to an EML chip inside the package through the slit formed on a rear sidewall of the package and die-bonded on the MOB. The EML TOSA shows a modulated output power of more than 3.5 dBm and a clear eye pattern with a dynamic extinction ratio of ~8.4 dB at a data rate of 25.78 Gb/s.

N × N polymer matrix switches using thermo-optic total-internal-reflection switch.

We have developed fully non-blocking optical matrix switches using a thermo-optic polymer 1 × 2 total-internal-reflection (TIR) switch as a unit switching element. The TIR switch consists of crossed multimode polymer waveguides and an offset heater electrode at the switching node. The fabricated 4 × 4 and 8 × 8 optical matrix switch chips show excellent switching performances. The insertion losses are less than 2.5 and 4.5 dB for the 4 × 4 and 8 × 8 matrix switches, respectively, and their switching isolations during a turned-off state are higher than 38 dB. The switching time is about 3 ms, and the power consumption for each switching element is below 30 mW. Compact integration of the 4 × 4 and 8 × 8 switch chips is achieved at sizes of 25 mm × 4.25 mm, and 42.4 mm × 5 mm, respectively, through an optimization of the waveguide and heater geometries.

200 GHz-spacing 8-channel multi-wavelength lasers for WDM-PON optical line terminal sources.

We have fabricated modules of 8-channel multi-wavelength lasers (MWLs) with a wavelength separation of 200 GHz for the wavelength division multiplexed-passive optical network (WDM-PON) optical line terminal sources. The variation in the output power is minimized by inserting silicone between the superluminescent diode (SLD) and the silica waveguide. The wavelength shift of each channel is less than 0.21 nm from the ITU grid and can be controlled in the range of 0.36 nm without any reductions of the output power by a tuning heater. MWLs operated successfully in the direct modulation for 1.25 Gbit/s transmissions over 20 km.