Towards a comprehensive characterization of spatio-temporal dependence of light-induced electromagnetic forces in dielectric liquids.

The interaction of localized light with matter generates optical electrostriction within dielectric fluids, leading to a discernible change in the refractive index of the medium according to the excitation's light profile. This optical force holds critical significance in optical manipulation and plays a fundamental role in numerous photonic applications. In this study, we demonstrate the applicability of the pump-probe, photo-induced lensing (PIL) method to investigate optical electrostriction in various dielectric liquids. Notably, the thermal and nonlinear effects are observed to be temporally decoupled from the electrostriction effects, facilitating isolated observation of the latter. Our findings provide a comprehensive explanation of optical forces in the context of the recently introduced microscopic Ampère electromagnetic formalism, which is grounded in the dipolar approximation of electromagnetic sources within matter and characterizes electrostriction as an electromagnetic-induced stress within the medium. Here, the optical force density is re-obtained through a new Lagrangian approach.

The role of electrostriction in the generation of acoustic waves by optical forces in water.

We present semi-analytical solutions describing the spatiotemporal distributions of temperature and pressure inside low-absorbing dielectrics excited by tightly focused laser beams. These solutions are compared to measurements in water associated with variations of the local refractive index due to acoustic waves generated by electrostriction, heat deposition, and the Kerr effect at different temperatures. The experimental results exhibited an excellent agreement with the modeling predictions, with electrostriction being the dominant transient effect in the acoustic wave generation. Measurements at 4 . 0 ∘ C show that the thermoelastic contribution to the optical signal is significantly reduced due to the low thermal expansion coefficient of water at this temperature.

Ex vivo UV-vis and FTIR photoacoustic spectroscopy of natural nanoemulsions from cellulose nanocrystals and saponins topically applied into the skin: Diffusion rates and physicochemical evaluation.

Nanoemulsions are increasingly gaining importance in the development of topically applied medicine and cosmetic products because their small droplets favor the penetration rates of active compounds into the body. In this scenario, the measurements of their diffusion rates as well as eventual physicochemical changes in the target tissues are of utmost importance. It is also recognized that the use of natural surfactants can avoid allergic reactions as frequently observed for synthetic products. The natural saponins extracted from Sapindus Saponaria have the property of forming foam and are exploited as biocompatible and biodegradable, while cellulose nanocrystals are known to increase the stability of a formulation avoiding the coalescence of drops at the interface. Therefore, nanoemulsions combining natural saponins and cellulose nanocrystals are promising systems that may facilitate greater diffusion rates of molecules into the skin, being candidates to substitute synthetic formulations. This study applied the Photoacoustic Spectroscopy technique to measure the diffusion rates and the physicochemical properties of nanoemulsified formulations containing saponins and cellulose nanocrystals topically applied to the skin. The ex vivo study combined the first-time photoacoustic measurements performed in both ultraviolet-visible and mid-infrared spectral regions. The toxicity of these formulations in L929 cells was also evaluated. The results showed that the formulations were able to propagate throughout the skin to a depth of approximately 756 µm, reaching the dermal side. The non-observation of absorbing band shifting or new bands in the FTIR spectra suggests that there were no structural changes in the skin as well as in the formulations after the nanoemulsions administration. The cytotoxicity results showed that the increase of cellulose nanocrystals concentration decreased cellular toxicity. In conclusion, the results demonstrated the advantage of combining photoacoustic methods in the ultraviolet-visible and mid-infrared spectral regions to analyze drug diffusion and interaction with the skin tissues. Both methods complement each other, allowing the confirmation of the nanoemulsion diffusion through the skin and also suggesting there were no detectable physicochemical changes in the tissues. Formulations stabilized with saponins and cellulose nanocrystals showed great potential for the development of topically administered cosmetics and drugs.

Unveiling bulk and surface radiation forces in a dielectric liquid.

Precise control over light-matter interactions is critical for many optical manipulation and material characterization methodologies, further playing a paramount role in a host of nanotechnology applications. Nonetheless, the fundamental aspects of interactions between electromagnetic fields and matter have yet to be established unequivocally in terms of an electromagnetic momentum density. Here, we use tightly focused pulsed laser beams to detect bulk and boundary optical forces in a dielectric fluid. From the optical convoluted signal, we decouple thermal and nonlinear optical effects from the radiation forces using a theoretical interpretation based on the Microscopic Ampère force density. It is shown, for the first time, that the time-dependent pressure distribution within the fluid chiefly originates from the electrostriction effects. Our results shed light on the contribution of optical forces to the surface displacements observed at the dielectric air-water interfaces, thus shedding light on the long-standing controversy surrounding the basic definition of electromagnetic momentum density in matter.

Photoacoustic for thermal diffusivity determination of fish scale: A methodology for environmental integrity monitoring.

In this work the thermal diffusivity (D) of Astyanax lacustris fish scale is investigated aiming to use it for environmental integrity certification. The D values were obtained by a relatively simple procedure by a photoacoustic method. The chosen fish species is from wide occurrence in Brasil's basins. It has short migration, and it has also been used as environmental bioindicator. The results obtained in 195 scales sampled from three different streams in the Midwest region in Brazil gives an average value of D ~ 4 × 10-3 cm2/s. ANCOVA analysis demonstrated that D values are able to differentiate among the three basins and indicates that it is dependent on the scales thickness and water conductivity. This last one is strongly affected by biotic and abiotic actions, so that D values measured by photoacoustic method can be used for interpreting the environmental integrity from where the fishes were sampled.

In situ structural analysis of calcium aluminosilicate glasses under high pressure.

In situ micro-Raman spectroscopy was used to investigate the structural evolution of OH(-)-free calcium aluminosilicate glasses, under high pressure and at room temperature. Evaluation was made of the role of the SiO2 concentration in percalcic join systems, for Al/(Al + Si) in the approximate range from 0.9 to 0.2. Under high pressure, the intensity of the main band related to the bending mode of bridging oxygen ([Formula: see text][T-O-T], where T = Si or Al) decreased gradually, suggesting that the bonds were severely altered or even destroyed. In Si-rich glasses, compression induced a transformation of Q (n) species to Q (n-1). In the case of Al-rich glass, the Al in the smallest Q (n) units evolved from tetrahedral to higher-coordinated Al (([5])Al and ([6])Al). Permanent structural changes were observed in samples recovered from the highest pressure of around 15 GPa and, particularly for Si-rich samples, the recovered structure showed an increase of three-membered rings in the Si/Al tetrahedral network.

Investigation into photostability of soybean oils by thermal lens spectroscopy.

Assessment of photochemical stability is essential for evaluating quality and the shelf life of vegetable oils, which are very important aspects of marketing and human health. Most of conventional methods used to investigate oxidative stability requires long time experimental procedures with high consumption of chemical inputs for the preparation or extraction of sample compounds. In this work we propose a time-resolved thermal lens method to analyze photostability of edible oils by quantitative measurement of photoreaction cross-section. An all-numerical routine is employed to solve a complex theoretical problem involving photochemical reaction, thermal lens effect, and mass diffusion during local laser excitation. The photostability of pure oil and oils with natural and synthetic antioxidants is investigated. The thermal lens results are compared with those obtained by conventional methods, and a complete set of physical properties of the samples is presented.

Role of photophysics processes in thermal lens spectroscopy of fluids: a theoretical study.

Photophysics processes are ubiquitous in nature and difficult to be quantitatively characterized by conventional spectroscopy. Alternatively, pump-probe methods have been widely applied to study these complex processes. In this context, the thermal lens technique is a precise spectroscopic tool for material characterization and presents a wide range of applications in chemical analysis. Here, we present an all numerical approach to analyze the dynamics of photophysics processes and to identify the role of individual contributions of photoreaction and mass diffusion in the thermal lens experiments. The results are essential for a proper understanding of the dominant physical mechanisms in laser-induced photodegradation, which allow precise data analysis of the effects in photosensitive fluids.

Hydrogen peroxide diffusion dynamics in dental tissues.

The aim of this study was to investigate the diffusion dynamics of 25% hydrogen peroxide (H2O2) through enamel-dentin layers and to correlate it with dentin's structural alterations. Micro-Raman Spectroscopy (MRS) and Fourier Transform Infrared Photoacoustic Spectroscopy (FTIR-PAS) were used to measure the spectra of specimens before and during the bleaching procedure. H2O2 was applied to the outer surface of human enamel specimens for 60 minutes. MRS measurements were performed on the inner surface of enamel or on the subsurface dentin. In addition, H2O2 diffusion dynamics from outer enamel to dentin, passing through the dentin-enamel junction (DEJ) was obtained with Raman transverse scans. FTIR-PAS spectra were collected on the outer dentin. MRS findings revealed that H2O2 (O-O stretching µ-Raman band) crossed enamel, had a more marked concentration at DEJ, and accumulated in dentin. FTIR-PAS analysis showed that H2O2 modified dentin's organic compounds, observed by the decrease in amides I, II, and III absorption band intensities. In conclusion, H2O2 penetration was demonstrated to be not merely a physical passage through enamel interprismatic spaces into the dentinal tubules. H2O2 diffusion dynamics presented a concentration gradient determined by the chemical affinity of the H2O2 with each specific dental tissue.

Modeling the population lens effect in thermal lens spectrometry.

We report a theoretical model and experimental results for laser-induced lensing in solids. The model distinguishes and quantifies the contributions from population and thermal effects. Laser-induced lensing in ytterbium-doped fluorozirconate glass ZBLAN:Yb(3+) is measured, and the thermal and optical properties obtained from analyzing the data with the proposed model agree well with published values. Photothermal techniques are used extensively for the investigation of laser and laser-cooling materials, and the model developed here enables the interpretation of convoluted laser-induced lensing signals that have contributions from different sources.

Tunable color temperature of Ce3+/Eu2+, 3+ co-doped low silica aluminosilicate glasses for white lighting.

In this paper we report results of tunable lighting in Ce(3+)/Eu(2+,3+) doped low silica calcium aluminosilicate glass. Optical spectroscopy experiments indicate that there is a red color compensation from Eu(2+) and Eu(3+) to the green emission from Ce(3+), resulting in a broad and tunable emission spectra depending on the excitation wavelength. This result analysed in the CIE 1976 color diagram shows a close distance from the Plank emission and a correlated color temperature, varying from 5200 to 3500K. This indicates that our system can be easily excited by GaN based blue LEDs, being an interesting phosphor for white lighting devices.

Laser-induced chemical reaction characterization in photosensitive aqueous solutions.

A dual-wavelength on/off-excitation thermal lens technique was used to identify and quantify a laser-induced chemical reaction in ionic aqueous solutions of Fe(II)-TPTZ. On/off modeling was used to fit the TL experimental data, which provided the primary effect generated during laser-excitation. The addition of HCl in the solutions reduced the activation barrier; this behavior followed the Arrhenius correlation. The nature of the photo-oxidation of Fe(II)-TPTZ complex is discussed. The results suggest that this technique may contribute to the understanding of the dynamics of complex reactions, which may lead to a more precise determination of the physicochemical properties involved in a photochemical reaction.

Soret effect and photochemical reaction in liquids with laser-induced local heating.

We report a theoretical model and experimental results for laser-induced local heating in liquids, and propose a method to detect and quantify the contributions of photochemical and Soret effects in several different situations. The time-dependent thermal and mass diffusion equations in the presence and absence of laser excitation are solved. The two effects can produce similar transients for the laser-on refractive index gradient, but very different laser-off behavior. The Soret effect, also called thermal diffusion, and photochemical reaction contributions in photochemically reacting aqueous Cr(VI)-diphenylcarbazide, Eosin Y, and Eosin Y-doped micellar solutions, are decoupled in this work. The extensive use of lasers in various optical techniques suggests that the results may have significance extending from physical-chemical to biological applications.

Color tunability with temperature and pump intensity in Yb3+/Tm3+ codoped aluminosilicate glass under anti-Stokes excitation.

Pump and thermally induced color tunabilities were demonstrated in Yb(3+)/Tm(3+) codoped low silica calcium aluminosilicate (LSCAS) glass under anti-Stokes excitation at 1.064 microm. The effects of pump intensity and sample's temperature on the upconversion emissions and mainly on the color tunabilities (from 800 to 480 nm) were investigated. The results revealed a 20- and a threefold reductions at 800/480 nm ratio as, respectively, the pump intensity and sample's temperature were increased from 27 to 700 kW/cm(2) and from 296 to 577 K. These behaviors with pump intensity and temperature (a strong increase of the 480 nm emission in comparison with the 800 nm one) were attributed to the several efficient processes occurring in the LSCAS system (Yb(3+)-->Tm(3+) energy-transfer processes, easy saturations of the Yb(3+) and Tm(3+) excited states, and radiative emissions). Besides these assigns, the temperature dependence is mainly assigned to the temperature-dependent effective absorption cross section of the ytterbium sensitizer through the so-called multiphonon-assisted anti-Stokes excitation process. Theoretical analyses and fits of the experimental data provided quantitative information.

Preparation, characterization, and spectroscopic properties of PC/PMMA doped blends: study of the effect of rare-earth doping on luminescence, quenching rate, and lifetime enhancement.

Optical properties of highly transparent blends formed by bisphenol A polycarbonate (PC) and poly(methyl methacrylate) (PMMA) and doped with either europium(III) thenoyltrifluoroacetone hydrate [Eu(TTA)(3)-hydrate] or terbium(III) acetylacetonate hydrate [Tb(ACAC)(3)-hydrate] were studied. From the absorption/emission spectra (200 to 800 nm), percolation limits of less than 0.4 wt/wt% for Eu and above 0.7 wt/wt% for Tb were found. Lifetimes for 20/80 and 60/40 Tb-doped blends were from 1.0 to 1.5 ms, respectively, about 5 times longer than for a similar blend prepared with Langmuir-Blodgett film. For blends doped with Eu, the lifetimes were from 0.4 to 0.8 ms, almost double that for the pure complex. The results indicated interactions between the PC/PMMA blends and the rare-earth ion complex. Particularly, photoluminescent spectra evidenced the incorporation of the Eu(3+) and Tb(3+) ions into the blend, with quenching observed near 1.0 wt/wt%, except for the 20/80 blend doped with Eu ion, in which luminescence increased to 5 wt/wt %.

High values of gain cross section and luminescence quantum efficiency in OH(-)-free Ti3+-doped low-silica calcium aluminosilicate glass.

We recently reported that Ti(3+)-doped low-silica calcium aluminosilicate glass presents long luminescence lifetime (170 micros) and broad emission band (190 nm) shifted toward the visible region when compared with those from Ti(3+):sapphire single crystal and Ti(3+)-doped glasses [Phys. Rev. Lett.100, 027402 (2008)]. Here we demonstrate that this glass also shows high values of both gain cross section (approximately 4.7 x 10(-19) cm(2)) and luminescence quantum efficiency (approximately 70%). By comparing these values with those for Ti(3+):sapphire crystal, we can conclude that the studied Ti(3+)-doped glass is a promising system for tunable solid-state lasers.

Photoacoustic spectroscopy as a tool for determination of food dyes: comparison with first derivative spectrophotometry.

Photoacoustic spectroscopy (PAS) was applied as a method to quantify dyed food samples, and was compared with First Derivative Spectrophotometry (FDS). The dyes Brilliant Blue (B), Sunset Yellow (S) and Tartrazine (T), which are common food additives, were employed for the comparisons. Polyester-type Polyurethane (PU) foam was used for extraction of the dyes from a solution containing the food matrix. For the spectrophotometric determinations, the adsorbed dyes were recovered by using dimethylformamide. The PAS measurements were carried out directly on the PU foam. The PAS method showed greater sensitivity, with detection limits of 0.028 mg L(-1) and 0.086 mg L(-1) for S and T, respectively, in the S+T mixture, and of 0.012 mg L(-1) and 0.068 mg L(-1) for B and T, respectively, in the B+T mixture. The values of relative error obtained for all the dyes were small: approximately 0.3-3.6% for the spectrophotometer, and approximately 0.1-2.9% for the PAS method. The PAS technique can be applied to the determination of the selected dyes in commercial food products, with some advantages: it reduces the number of analysis steps, it is a "green" method with less chemical waste, a minimal sample amount is needed, and it is non-destructive.

Study on the observation of Eu2+ and Eu3+ valence states in low silica calcium aluminosilicate glasses.

The optical, magnetic and structural properties of Eu doped low silica calcium aluminosilicate glasses were investigated. The optical absorption coefficient presented two bands at 39,246 and 29,416 cm(-1), which were assigned respectively to the [Formula in text], and [Formula in text] transitions of Eu(2+). The fluorescence measured at 300 K on a sample doped with 0.5 wt% of Eu(2)O(3) exhibited a broad band centered at 17,350 cm(-1), which is attributed to the [Formula in text] transition of Eu(2+), whereas the additional peaks are due to the [Formula in text] transitions of Eu(3+). From magnetization and XANES data it was possible to evaluate the fractions of Eu(2+) and Eu(3+) for the sample doped with 0.5 and 5.0 wt% of Eu(2)O(3), the values of which were approximately 30 and 70%, respectively.

Dynamics of reepithelialisation and penetration rate of a bee propolis formulation during cutaneous wounds healing.

The aim of this work is to investigate the dynamics of reepithelialisation and the penetration rate of a propolis ointment formulation during cutaneous wounds healing. The experiments were performed as a function of the treatment time in a well controlled group of rats. We observed that the propolis ointment influenced the healing process stimulating keratinocytes cell proliferation as compared to the control group. It was shown that the propagation of the bee propolis was dependent on the wound healing stages. In addition, the photoacoustic spectroscopy showed that the applied substances reached the deep wound region, highlighting once again the particular characteristic of this technique to evaluate the penetration rate of substances through the skin.

Investigation of Cryptosporidium spp. and Giardia spp. in a public water-treatment system.

The objective of this study was to investigate the occurrence of Cryptosporidium spp. and Giardia spp. in a public water-treatment system and to relate the results to physical, chemical, bacteriological and climate parameters. From March to September 2006, 30 samples, 15 of raw water and 15 of treated water, were examined by membrane filtration and direct immunofluorescence (Merifluor). For each sample, a volume of 1000 1 was collected. Of the raw-water samples, 26.6% were positive for Cryptosporidium (mean concentration of 0.15 oocysts/l), and 6.66% were positive for Giardia (concentration of 0.2 cysts/l); 13.33% of the samples were positive for both (mean concentrations of 0.06 oocysts/l and 0.026 cysts/l respectively). All the samples of treated water were negative. There was no correlation (P < 0.05) between the presence of protozoans in the raw water and the parameters measured. The finding of Giardia and Cryptosporidium in raw water indicates that the water sources are contaminated. Considering that giardiasis is prevalent in the population and that Cryptosporidium has recognized zoonotic potential, long-term monitoring at critical points of the system is necessary to guarantee that the water will not be a vehicle for transmission of these protozoans.