Control of magnetite primary particle size in aqueous dispersions of nanoclusters for high magnetic susceptibilities.

Aqueous dispersions of iron oxide nanoparticles with a high initial magnetic susceptibility (χi) are of interest as contrast agents in electromagnetic tomography. Nanoclusters composed of iron oxide primary particles were formed by co-precipitation of Fe(II) and Fe(III) chlorides at alkaline conditions and high temperature of 95°C. Two-step addition of citrate was used to produce large primary particles and then stabilize the nanoclusters. The size of the primary particles was tuned from 5nm to 15nm by varying the citrate/iron precursor ratio during the normal phase hydrolysis reaction, while the second iteration of citrate stabilized the nanoclusters with hydrodynamic diameters of 30-75nm. The crystallinity of the iron oxide nanoparticles was promoted by annealing at 95°C and systematically studied with Superconducting Quantum Interference Device (SQUID), Vibrating Sample Magnetometer (VSM), Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD). The dependence of χi was examined over a range of low volume fractions (0.005<θ<0.02) to understand the magnetic behavior of dispersions. The χi of the dispersions increased markedly with the size and concentration of the constituent primary particles, reaching an unusually high value of 0.85 at 1.6% v/v for 15nm primary particles, which is 2-3 times higher than that for typical commercial ferrofluids. The high χi values are favored by the high crystallinity and the large magnetic diameter of 9.3nm, indicating a relatively thin surface nonmagnetic layer where the spin orientations are disordered.

Adsorption of iron oxide nanoclusters stabilized with sulfonated copolymers on silica in concentrated NaCl and CaCl2 brine.

Transport of metal oxide nanoparticles in porous rock is of interest for imaging and oil recovery in subsurface reservoirs, which often contain concentrated brine. Various copolymers composed of acrylic acid and either 2-acrylamido-2-methylpropanesulfonate or styrenesulfonate were synthesized and adsorbed on iron oxide nanoclusters to provide colloidal stability and to achieve low adsorption on silica in high salinity brine composed of 8%wt. NaCl+2%wt. CaCl2. Furthermore, the degree of adsorption of the nanoparticles on silica was controlled by modifying the acrylic acid groups in the copolymers with a series of diamines and triamines to add hydrophobicity. The adsorption on colloidal silica microparticles ranged from <1 mg/m(2) for highly charged hydrophilic surfaces on the iron oxide nanoparticles to 22 mg/m(2) for the most hydrophobic amine-modified surfaces, corresponding to monolayer coverages that ranged from 0.2% to 11.5%, respectively. The specific adsorption (mg-IO/m(2)-silica), monolayer coverage, and parameters for Langmuir isotherms were evaluated for various IO nanoclusters as a function of the properties of the copolymers on their surfaces.

Iron oxide nanoparticles grafted with sulfonated copolymers are stable in concentrated brine at elevated temperatures and weakly adsorb on silica.

Magnetic nanoparticles that can be transported in subsurface reservoirs at high salinities and temperatures are expected to have a major impact on enhanced oil recovery, carbon dioxide sequestration, and electromagnetic imaging. Herein we report a rare example of steric stabilization of iron oxide (IO) nanoparticles (NPs) grafted with poly(2-acrylamido-2-methylpropanesulfonate-co-acrylic acid) (poly(AMPS-co-AA)) that not only display colloidal stability in standard American Petroleum Institute (API) brine (8% NaCl + 2% CaCl2 by weight) at 90 °C for 1 month but also resist undesirable adsorption on silica surfaces (0.4% monolayer NPs). Because the AMPS groups interacted weakly with Ca(2+), they were sufficiently well solvated to provide steric stabilization. The PAA groups, in contrast, enabled covalent grafting of the poly(AMPS-co-AA) chains to amine-functionalized IO NPs via formation of amide bonds and prevented polymer desorption even after a 40,000-fold dilution. The aforementioned methodology may be readily adapted to stabilize a variety of other functional inorganic and organic NPs at high salinities and temperatures.

Stabilization of iron oxide nanoparticles in high sodium and calcium brine at high temperatures with adsorbed sulfonated copolymers.

A series of sulfonated random and block copolymers were adsorbed on the surface of ~100 nm iron oxide (IO) nanoparticles (NPs) to provide colloidal stability in extremely concentrated brine composed of 8% wt NaCl + 2% wt CaCl2 (API brine; 1.4 M NaCl + 0.2 M CaCl2) at 90 °C. A combinatorial materials chemistry approach, which employed Ca(2+)-mediated adsorption of anionic acrylic acid-containing sulfonated polymers to preformed citrate-stabilized IO nanoclusters, enabled the investigation of a large number of polymer coatings. Initially a series of poly(2-methyl-2-acrylamidopropanesulfonate-co-acrylic acid) (poly(AMPS-co-AA)) (1:8 to 1:1 mol:mol), poly(styrenesulfonate-block-acrylic acid) (2.4:1 mol:mol), and poly(styrenesulfonate-alt-maleic acid) (3:1 mol:mol) copolymers were screened for solubility in API brine at 90 °C. The ratio of AMPS to AA groups was varied to balance the requirement of colloid dispersibility at high salinity (provided by AMPS) against the need for anchoring of the polymers to the iron oxide surface (via the AA). Steric stabilization of IO NPs coated with poly(AMPS-co-AA) (1:1 mol:mol) provided colloidal stability in API brine at room temperature and 90 °C for up to 1 month. The particles were characterized before and after coating at ambient and elevated temperatures by a variety of techniques including colloidal stability experiments, dynamic light scattering, zeta potential, and thermogravimetric analysis.

Nanoparticle-stabilized carbon dioxide-in-water foams with fine texture.

The concept of hydrophilic/CO(2)-philic balance (HCB) was extended to describe stabilization of carbon dioxide-in-water (C/W) foams (also called emulsions) with silica nanoparticles adsorbed at the CO(2)-water interface. Opaque, white C/W foams (bubble diameter <100 µm) were generated with either PEG-coated silica or methylsilyl modified silica nanoparticles in a beadpack with CO(2) densities between 0.2 and 0.9 g mL(-1). For methylsilyl modified silica nanoparticles, 50% SiOH modification provided an optimal HCB for generation and stabilization of viscous C/W foams with high stability. The apparent viscosity measured with a capillary tube viscometer reached 120-fold that of a CO(2)-water mixture without nanoparticles, a consequence of the small bubble size and the energy required to deform a high density of aqueous lamellae between CO(2) bubbles. Air-in-water (A/W) foams stabilized with nanoparticles were used to gain insight into the relationship between nanoparticle surface properties and adsorption of the nanoparticles at various types of interfaces. With suitable nanoparticles, A/W foams were stable for at least 7 days and C/W foams were stable for at least 23 h. The ability to achieve long term stability for nanoparticle stabilized C/W foams could offer an alternative to conventional surfactants, which are known to have much lower adsorption energies.

Molten-droplet synthesis of composite CdSe hollow nanoparticles.

Many colloidal synthesis routes are not scalable to high production rates, especially for nanoparticles of complex shape or composition, due to precursor expense and hazards, low yields, and the large number of processing steps. The present work describes a strategy to synthesize hollow nanoparticles (HNPs) out of metal chalcogenides, based on the slow heating of a low-melting-point metal salt, an elemental chalcogen, and an alkylammonium surfactant in octadecene solvent. The synthesis and characterization of CdSe HNPs with an outer diameter of 15.6 ± 3.5 nm and a shell thickness of 5.4 ± 0.9 nm are specifically detailed here. The HNP synthesis is proposed to proceed with the formation of alkylammonium-stabilized nano-sized droplets of molten cadmium salt, which then come into contact with dissolved selenium species to form a CdSe shell at the droplet surface. In a reaction-diffusion mechanism similar to the nanoscale Kirkendall effect it is speculated that the cadmium migrates outwardly through this shell to react with more selenium, causing the CdSe shell to thicken. The proposed CdSe HNP structure comprises a polycrystalline CdSe shell coated with a thin layer of amorphous selenium. Photovoltaic device characterization indicates that HNPs have improved electron transport characteristics compared to standard CdSe quantum dots, possibly due to this selenium layer. The HNPs are colloidally stable in organic solvents even though carboxylate, phosphine, and amine ligands are absent; stability is attributed to octadecene-selenide species bound to the particle surface. This scalable synthesis method presents opportunities to generate hollow nanoparticles with increased structural and compositional variety.

Templating CdSe tetrapods at the air/water interface with POPC lipids.

Surfactants have been widely used as templating agents to pattern the orientation of nanoparticles of various conformations. Here we report the use of a lipid, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), as a template to order CdSe tetrapods (TPs) at the air/water interface using a Langmuir-Blodgett trough. The surface pressure versus area isotherms for CdSe TPs and CdSe TPs/POPC are examined and monitored by Brewster angle microscopy (BAM). The transferred thin films are further characterized by transmission electron microscopy (TEM) and atomic force microscopy (AFM). Initially disc-like structures containing randomly oriented TPs form during solvent evaporation. Upon decreasing surface area, these discs merge into larger continental structures. In a mixed CdSe TPs/POPC system, these discs organize into wire-like networks upon compression. We detail how lipid molecules can be used to direct the two-dimensional assembly of TPs.

A nanocomplex that is both tumor cell-selective and cancer gene-specific for anaplastic large cell lymphoma.

BACKGROUND: Many in vitro studies have demonstrated that silencing of cancerous genes by siRNAs is a potential therapeutic approach for blocking tumor growth. However, siRNAs are not cell type-selective, cannot specifically target tumor cells, and therefore have limited in vivo application for siRNA-mediated gene therapy. RESULTS: In this study, we tested a functional RNA nanocomplex which exclusively targets and affects human anaplastic large cell lymphoma (ALCL) by taking advantage of the abnormal expression of CD30, a unique surface biomarker, and the anaplastic lymphoma kinase (ALK) gene in lymphoma cells. The nanocomplexes were formulated by incorporating both ALK siRNA and a RNA-based CD30 aptamer probe onto nano-sized polyethyleneimine-citrate carriers. To minimize potential cytotoxicity, the individual components of the nanocomplexes were used at sub-cytotoxic concentrations. Dynamic light scattering showed that formed nanocomplexes were ~140 nm in diameter and remained stable for more than 24 hours in culture medium. Cell binding assays revealed that CD30 aptamer probes selectively targeted nanocomplexes to ALCL cells, and confocal fluorescence microscopy confirmed intracellular delivery of the nanocomplex. Cell transfection analysis showed that nanocomplexes silenced genes in an ALCL cell type-selective fashion. Moreover, exposure of ALCL cells to nanocomplexes carrying both ALK siRNAs and CD30 RNA aptamers specifically silenced ALK gene expression, leading to growth arrest and apoptosis. CONCLUSIONS: Taken together, our findings indicate that this functional RNA nanocomplex is both tumor cell type-selective and cancer gene-specific for ALCL cells.

Understanding mercapto ligand exchange on the surface of FePt nanoparticles.

Tailoring the surface of nanoparticles is essential for biological applications of magnetic nanoparticles. FePt nanoparticles are interesting candidates owing to their high magnetic moment. Established procedures to make FePt nanoparticles use oleic acid and oleylamine as the surfactants, which make them dispersed in nonpolar solvents such as hexane. As a model study to demonstrate the modification of the surface chemistry, stable aqueous dispersions of FePt nanoparticles were synthesized after ligand exchange with mercaptoalkanoic acids. This report focuses on understanding the surface chemistry of FePt upon ligand exchange with mercapto compounds by conducting X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) studies. It was found that the mercapto end displaces oleylamine on the Pt atoms and the carboxylic acid end displaces the oleic acid on the Fe atoms, thus exposing carboxylate and thiolate groups on the surface that provide the necessary electrostatic repulsion to form stable aqueous dispersions of FePt nanoparticles.

Covalently linked Au nanoparticles to a viral vector: potential for combined photothermal and gene cancer therapy.

Hyperthermia can be produced by near-infrared laser irradiation of gold nanoparticles present in tumors and thus induce tumor cell killing via a bystander effect. To be clinically relevant, however, several problems still need to be resolved. In particular, selective delivery and physical targeting of gold nanoparticles to tumor cells are necessary to improve therapeutic selectivity. Considerable progress has been made with respect to retargeting adenoviral vectors for cancer gene therapy. We therefore hypothesized that covalent coupling of gold nanoparticles to retargeted adenoviral vectors would allow selective delivery of the nanoparticles to tumor cells, thus feasibilizing hyperthermia and gene therapy as a combinatorial therapeutic approach. For this, sulfo-N-hydroxysuccinimide labeled gold nanoparticles were reacted to adenoviral vectors encoding a luciferase reporter gene driven by the cytomegalovirus promoter (AdCMVLuc). We herein demonstrate that covalent coupling could be achieved, while retaining virus infectivity and ability to retarget tumor-associated antigens. These results indicate the possibility of using adenoviral vectors as carriers for gold nanoparticles.