Efficient light harvesting in hybrid quantum dot-interdigitated back contact solar cells via resonant energy transfer and luminescent downshifting.

In this paper, we propose a hybrid quantum dot (QD)/solar cell configuration to improve performance of interdigitated back contact (IBC) silicon solar cells, resulting in 39.5% relative boost in the short-circuit current (JSC) through efficient utilisation of resonant energy transfer (RET) and luminescent downshifting (LDS). A uniform layer of CdSe1-xSx/ZnS quantum dots is deposited onto the AlOx surface passivation layer of the IBC solar cell. QD hybridization is found to cause a broadband improvement in the solar cell external quantum efficiency. Enhancement over the QD absorption wavelength range is shown to result from LDS. This is confirmed by significant boosts in the solar cell internal quantum efficiency (IQE) due to the presence of QDs. Enhancement over the red and near-infrared spectral range is shown to result from the anti-reflection properties of the QD layer coating. A study on the effect of QD layer thickness on solar cell performance was performed and an optimised QD layer thickness was determined. Time-resolved photoluminescence (TRPL) spectroscopy was used to investigate the photoluminescence dynamics of the QD layer as a function of AlOx spacer layer thickness. RET can be evoked between the QD and Si layers for very thin AlOx spacer layers, with RET efficiencies of up to 15%. In the conventional LDS architecture, down-converters are deposited on the surface of an optimised anti-reflection layer, providing relatively narrowband enhancement, whereas the QDs in our hybrid architecture provide optical enhancement over the broadband wavelength range, by simultaneously utilising LDS, RET-mediated carrier injection, and antireflection effects, resulting in up to 40% improvement in the power conversion efficiency (PCE). Low-cost synthesis of QDs and simple device integration provide a cost-effective solution for boosting solar cell performance.

Reflectance properties of silicon moth-eyes in response to variations in angle of incidence, polarisation and azimuth orientation.

We report a study of the optical properties of silicon moth-eye structures using a custom-made fully automated broadband spectroscopic reflectometry system (goniometer). This measurement system is able to measure specular reflectance as a function of wavelength, polar incidence angle and azimuth orientation angle, from normal to near-parallel polar incidence angle. The system uses a linear polarized broadband super-continuum laser light source. It is shown that a moth-eye structure composed of a regular array of protruding silicon rods, with finite sidewall angle reduces reflectance and sensitivity to incident wavelength in comparison to truly cylindrical rods with perpendicular sidewalls. It is also shown that moth-eye structures have omnidirectional reflectance properties in response to azimuth orientation of the sample. The importance of applying the reflectometer setup to study the optical properties of solar cell antireflective structures is highlighted.

Suppression of backscattered diffraction from sub-wavelength 'moth-eye' arrays.

The eyes and wings of some species of moth are covered with arrays of nanoscale features that dramatically reduce reflection of light. There have been multiple examples where this approach has been adapted for use in antireflection and antiglare technologies with the fabrication of artificial moth-eye surfaces. In this work, the suppression of iridescence caused by the diffraction of light from such artificial regular moth-eye arrays at high angles of incidence is achieved with the use of a new tiled domain design, inspired by the arrangement of features on natural moth-eye surfaces. This bio-mimetic pillar architecture contains high optical rotational symmetry and can achieve high levels of diffraction order power reduction. For example, a tiled design fabricated in silicon and consisting of domains with 9 different orientations of the traditional hexagonal array exhibited a ~96% reduction in the intensity of the -1 diffraction order. It is suggested natural moth-eye surfaces have evolved a tiled domain structure as it confers efficient antireflection whilst avoiding problems with high angle diffraction. This combination of antireflection and stealth properties increases chances of survival by reducing the risk of the insect being spotted by a predator. Furthermore, the tiled domain design could lead to more effective artificial moth-eye arrays for antiglare and stealth applications.

Ionoluminescence in the helium ion microscope.

Ionoluminescence (IL) is the emission of light from a material due to excitation by an ion beam. In this work, a helium ion microscope (HIM) has been used in conjunction with a luminescence detection system to characterize IL from materials in an analogous way to how cathodoluminescence (CL) is characterized in a scanning electron microscope (SEM). A survey of the helium ion beam induced IL characteristics, including images and spectra, of a variety of materials known to exhibit CL in an SEM is presented. Direct band-gap semiconductors that luminesce strongly in the SEM are found not do so in the HIM, possibly due to defect-related nonradiative pathways created by the ion beam. Other materials do, however, exhibit IL, including a cerium-doped garnet sample, quantum dots, and rare-earth doped LaPO4 nanocrystals. These emissions are a result of transitions between f electron states or transitions across size dependent band gaps. In all these samples, IL is found to decay with exposure to the beam, fitting well to double exponential functions. In an exploration of the potential of this technique for biological tagging applications, imaging with the IL emitted by rare-earth doped LaPO4 nanocrystals, simultaneously with secondary electron imaging, is demonstrated at a range of magnifications.

Helium ion microscopy of Lepidoptera scales.

In this report, helium ion microscopy (HIM) is used to study the micro and nanostructures responsible for structural color in the wings of two species of Lepidotera from the Papilionidae family: Papilio ulysses (Blue Mountain Butterfly) and Parides sesostris (Emerald-patched Cattleheart). Electronic charging of uncoated scales from the wings of these butterflies, due to the incident ion beam, is successfully neutralized, leading to images displaying a large depth-of-field and a high level of surface detail, which would normally be obscured by traditional coating methods used for scanning electron microscopy (SEM). The images are compared with those from variable pressure SEM, demonstrating the superiority of HIM at high magnifications. In addition, the large depth-of-field capabilities of HIM are exploited through the creation of stereo pairs that allows the exploration of the third dimension. Furthermore, the extraction of quantitative height information which matches well with cross-sectional transmission electron microscopy measurements from the literature is demonstrated.

Imaging the bulk nanoscale morphology of organic solar cell blends using helium ion microscopy.

We use helium ion microscopy (HeIM) to image the nanostructure of poly(3-hexylthiophene)/[6,6]-phenyl-C(61)-butric acid methyl ester (P3HT/PCBM) blend thin-films. Specifically, we study a blend thin-film subject to a thermal anneal at 140 °C and use a plasma-etching technique to gain access to the bulk of the blend thin-films. We observe a domain structure within the bulk of the film that is not apparent at the film-surface and tentatively identify a network of slightly elongated PCBM domains having a spatial periodicity of (20 ± 4) nm a length of (12 ± 8) nm.

Solar energy harvesting in the epicuticle of the oriental hornet (Vespa orientalis).

The Oriental hornet worker correlates its digging activity with solar insolation. Solar radiation passes through the epicuticle, which exhibits a grating-like structure, and continues to pass through layers of the exo-endocuticle until it is absorbed by the pigment melanin in the brown-colored cuticle or xanthopterin in the yellow-colored cuticle. The correlation between digging activity and the ability of the cuticle to absorb part of the solar radiation implies that the Oriental hornet may harvest parts of the solar radiation. In this study, we explore this intriguing possibility by analyzing the biophysical properties of the cuticle. We use rigorous coupled wave analysis simulations to show that the cuticle surfaces are structured to reduced reflectance and act as diffraction gratings to trap light and increase the amount absorbed in the cuticle. A dye-sensitized solar cell (DSSC) was constructed in order to show the ability of xanthopterin to serve as a light-harvesting molecule.