Multi-Objective Location and Mapping Based on Deep Learning and Visual Slam.

Simultaneous localization and mapping (SLAM) technology can be used to locate and build maps in unknown environments, but the constructed maps often suffer from poor readability and interactivity, and the primary and secondary information in the map cannot be accurately grasped. For intelligent robots to interact in meaningful ways with their environment, they must understand both the geometric and semantic properties of the scene surrounding them. Our proposed method can not only reduce the absolute positional errors (APE) and improve the positioning performance of the system but also construct the object-oriented dense semantic point cloud map and output point cloud model of each object to reconstruct each object in the indoor scene. In fact, eight categories of objects are used for detection and semantic mapping using coco weights in our experiments, and most objects in the actual scene can be reconstructed in theory. Experiments show that the number of points in the point cloud is significantly reduced. The average positioning error of the eight categories of objects in Technical University of Munich (TUM) datasets is very small. The absolute positional error of the camera is also reduced with the introduction of semantic constraints, and the positioning performance of the system is improved. At the same time, our algorithm can segment the point cloud model of objects in the environment with high accuracy.

Multi-Objective Optimization Design of Ladle Refractory Lining Based on Genetic Algorithm.

Genetic algorithm is widely used in multi-objective mechanical structure optimization. In this paper, a genetic algorithm-based optimization method for ladle refractory lining structure is proposed. First, the parametric finite element model of the new ladle refractory lining is established by using ANSYS Workbench software. The refractory lining is mainly composed of insulating layer, permanent layer and working layer. Secondly, a mathematical model for multi-objective optimization is established to reveal the functional relationship between the maximum equivalent force on the ladle lining, the maximum temperature on the ladle shell, the total mass of the ladle and the structural parameters of the ladle refractory lining. Genetic algorithm translates the optimization process of ladle refractory lining into natural evolution and selection. The optimization results show that, compared with the unoptimized ladle refractory lining structure (insulation layer thickness of 0 mm, permanent layer thickness of 81 mm, and working layer thickness of 152 mm), the refractory lining with insulation layer thickness of 8.02 mm, permanent layer thickness of 76.20 mm, and working layer thickness of 148.61 mm has the best thermal insulation performance and longer service life within the variation of ladle refractory lining structure parameters. Finally, the results of the optimization are verified and analyzed in this paper. The study found that by optimizing the design of the ladle refractory lining, the maximum equivalent force on the ladle lining, the maximum temperature on the ladle shell and the ladle mass were reduced. The thermal insulation performance and the lightweight performance of the ladle are improved, which is very important for improving the service life of the ladle.

Surface Defect Segmentation Algorithm of Steel Plate Based on Geometric Median Filter Pruning.

Problems such as redundancy of detection model parameters make it difficult to apply to factory embedded device applications. This paper focuses on the analysis of different existing deep learning model compression algorithms and proposes a model pruning algorithm based on geometric median filtering for structured pruning and compression of defect segmentation detection networks on the basis of structured pruning. Through experimental comparisons and optimizations, the proposed optimization algorithm can greatly reduce the network parameters and computational effort to achieve effective pruning of the defect detection algorithm for steel plate surfaces.

Intelligent Detection of Steel Defects Based on Improved Split Attention Networks.

The intelligent monitoring and diagnosis of steel defects plays an important role in improving steel quality, production efficiency, and associated smart manufacturing. The application of the bio-inspired algorithms to mechanical engineering problems is of great significance. The split attention network is an improvement of the residual network, and it is an improvement of the visual attention mechanism in the bionic algorithm. In this paper, based on the feature pyramid network and split attention network, the network is improved and optimised in terms of data enhancement, multi-scale feature fusion and network structure optimisation. The DF-ResNeSt50 network model is proposed, which introduces a simple modularized split attention block, which can improve the attention mechanism of cross-feature graph groups. Finally, experimental validation proves that the proposed network model has good performance and application prospects in the intelligent detection of steel defects.