Size control of gold nanocrystals in citrate reduction: the third role of citrate.

Growth kinetics and temporal size/shape evolution of gold nanocrystals by citrate reduction in boiling water were studied systematically and quantitatively. Results reveal that the size variation and overall reaction mechanism were mostly determined by the solution pH that was in turn controlled by the concentration of sodium citrate (Na3Ct) in the traditional Frens's synthesis. This conclusion was further confirmed by the reactions with variable pH but fixed concentrations of the two reactants, HAuCl4 and Na3Ct. Two substantially different reaction pathways were identified, with the switching point at pH = 6.2-6.5. The first pathway is for the low pH range and consists of three overlapping steps: nucleation, random attachment to polycrystalline nanowires, and smoothing of the nanowires via intra-particle ripening to dots. The second pathway that occurred above the pH switching point is consistent with the commonly known nucleation-growth route. Using the second pathway, we demonstrated a new synthetic route for the synthesis of nearly monodisperse gold nanocrystals in the size range from 20 to 40 nm by simply varying the solution pH with fixed concentrations of HAuCl4 and Na3Ct. The switching of the reaction pathways is likely due to the integration nature of water as a reaction medium. In the citrate reduction, the solution pH was varied by changing the initial HAuCl4/Na3Ct ratio. Consequently, when pH was higher than about 6.2, the very reactive [AuCl3(OH)]- would be converted to less reactive [AuCl2(OH)2]- and [AuCl(OH)3]-.

Controllable water permeation on a poly(N-isopropylacrylamide)-modified nanostructured copper mesh film.

Water permeation is important for various applications in industry, agriculture, and daily life. However, most research mainly focuses on the static wettability on different surfaces, and the dynamic properties of the micro- and nanostructure-enhanced responsive wettability is lacking. And the relevant application research is rare, which still remains a challenge. Herein we report the temperature-controllable water permeation on a poly(N-isopropylacrylamide)-modified nanostructured copper mesh film. At low temperatures (below 25 degrees C), the film shows good water permeability because of the highly hydrophilic nature, and as a result, the water can easily penetrate through the film. At high temperatures (above 40 degrees C), it is impermeable to water because of the superhydrophobicity and the large negative capillary effect induced by the micro- and nanostructures. The excellent controllability of water permeation on this film may be convenient for use in many processes including filtration, water/oil separation, and so on. A detailed investigation indicates that the special nanostructures and the appropriate size of the microscale mesh pores not only influence the static contact angles of the mesh film, but also, more importantly, greatly improve the dynamic properties of wettability at different temperatures simultaneously, which plays a crucial role in the excellent controllability over water permeation on this film. This work may also provide interesting insight into the design of novel functional devices that are relevant to surface wettability.

Surface-enhanced Raman scattering studies on immunoassay.

Surface-enhanced Raman scattering (SERS) has recently been a matter of keen interest from the points of both basic science and applications because by using the SERS effect one can obtain Raman signals even from a single molecule. Immunoassay is one of the most promising fields in the applications of SERS, and the purpose of this review paper is to discuss the potential of SERS in immunoassay. This paper consists of four parts work on the indirect and direct methods of immunoassay via SERS. These methods provide the laboratorial attempts on biomedical diagnostic applications of SERS.

Preparation of gold colloid monolayer by immunological identification.

The design and initial characterization of the self-assembled gold colloid monolayer by a sandwich structure via the immunological identification are reported. The 13 nm gold colloid nanoparticles and the silicon or quartz substrates have been modified with the mouse polyclonal antibody against hepatitis B virus surface antigen (PAb) and the mouse monoclonal antibody against hepatitis B virus surface antigen (MAb), respectively. They can be linked by a special reaction with their corresponding hepatitis B virus surface antigen (Antigen) as a sandwich structure. Thus, the density of gold nanoparticles self-assembled on the substrate can be readily controlled by the amount of the antigen added. The resulting substrates have been characterized by atomic force microscopy (AFM) and surface-enhanced Raman scattering (SERS) spectroscopy when the gold nanoparticles were modified with SERS-active probe molecules of 4-mercaptobenzoic acid (MBA) after silver enhancement. These data show that the gold nanoparticles are separately fixed onto the substrate and form a uniform monolayer, which possess a set of features that make them very attractive for both basic and applied uses, including roughness, high stability, and biocompatibility.

Prototype of immunochromatographic assay strips using colloidal CdTe nanocrystals as biological luminescent label.

Colloidal semiconductor nanocrystals have attracted considerable attention as a novel biological luminescent label. The bioinorganic conjugates of luminescent CdTe nanocrystals and protein, including CdTe/BSA (bovine serum albumin) and CdTe/MAB (mouse monoclonal antibody against hepatitis B surface antigen), were formed via electrostatic/coordination self-assembly. Pure CdTe nanocrystals, CdTe/BSA and CdTe/MAB were used in the immunochromatographic assay experiments, respectively. And the results indicated that CdTe nanocrystals could be used and developed as a novel label with good stability, high sensitivity and facile determination of several analytes in immunochromatographic assay strips.

An atomic force microscopic investigation of electro-sensitive polymer surface.

An electro-sensitive poly(2-acrylamide-2-methylpropane sulfonic acid) (PAMPS) film was fabricated by surface-initiated atom transfer radical polymerization (ATRP) method on silicon substrate. Atomic force microscopy (AFM) experiments in contact mode show that friction force and the adhesion force between the AFM tip and the film may change regularly with the alteration of the applied negative bias voltage between them, indicating that the microscopic wettability of the film can be adjusted by external electric field. On the other hand, the AFM experiments in tapping mode reveal that the film may take corresponding phase change under the electric field. These effects were considered to result from the conformational overturn of the sulfonic groups and the adjacent alkyl chains in the electric field.

Mixed ligand system of cysteine and thioglycolic acid assisting in the synthesis of highly luminescent water-soluble CdTe nanorods.

Highly luminescent water-soluble CdTe nanorods were prepared with the assistance of the mixed ligand system of cysteine and thioglycolic acid; the aspect ratio and photoluminescence of the CdTe nanorods could be controlled by the refluxing time.

Unique structure and photoluminescence of Au/CdTe nanostructure materials.

Unique nanostructure materials with highly ordered spherical aggregates have been obtained by self-organization of single CdTe nanocrystals using gold nanoparticles as seeds, and a red shift of the photoluminescence peak was observed.

Immunoassay using probe-labelling immunogold nanoparticles with silver staining enhancement via surface-enhanced Raman scattering.

This paper reports a novel immunoassay based on surface-enhanced Raman scattering (SERS) and immunogold labelling with silver staining enhancement. Immunoreactions between immunogold colloids modified by a Raman-active probe molecule (e.g., 4-mercaptobenzoic acid) and antigens, which were captured by antibody-assembled chips such as silicon or quartz, were detected via SERS signals of Raman-active probe molecule. All the self-assembled steps were subjected to the measurements of ultraviolet-visible (UV-vis) spectra to monitor the formation of a sandwich structure onto a substrate. The immunoassay was performed by a sandwich structure consisting of three layers. The first layer was composed of immobilized antibody molecules of mouse polyclonal antibody against Hepatitis B virus surface antigen (PAb) on a silicon or quartz substrate. The second layer was the complementary Hepatitis B virus surface antigen (Antigen) molecules captured by PAb on the substrate. The third layer was composed of the probe-labelling immunogold nanoparticles, which were modified by mouse monoclonal antibody against Hepatitis B virus surface antigen (MAb) and 4-mercaptobenzoic acid (MBA) as the Raman-active probe on the surface of gold colloids. After silver staining enhancement, the antigen is identified by a SERS spectrum of MBA. A working curve of the intensity of a SERS signal at 1585 cm(-1) due to the [small nu](8a) aromatic ring vibration of MBA versus the concentration of analyte (Antigen) was obtained and the non-optimized detection limit for the Hepatitis B virus surface antigen was found to be as low as 0.5 [micro sign]g mL(-1).

Application of impedance spectroscopy for monitoring colloid Au-enhanced antibody immobilization and antibody-antigen reactions.

We used colloidal Au to enhance the amount of antibody immobilized on a gold electrode and ultimately monitored the interaction of antigen-antibody by impedance measurement. Self-assembly of 6 nm (diameter) colloidal Au onto the self-assembled monolayers (SAMs) of 4-aminothiophenol modified gold electrode resulted in an easier attachment of antibody. The redox reactions of [Fe(CN)6](4-)/[Fe(CN)6](3-) on the gold surface were blocked due to the procedures of self-assembly of 4-aminothiophenol and antibody immobilization, which were investigated by cyclic voltammetry and impedance spectroscopy. The interaction of antigen with grafted antibody recognition layers was carried out by soaking the modified electrode into a phosphate buffer at pH 7.4 with various concentrations of antigen at 37 degrees C for 30 min. The antibody recognition layers and their interactions with various concentrations of antigen could be detected by measurements of the impedance change. The results show that this method has good correlation for detection of Hepatitis B virus surface antigen in the range of 0.5-200 microg/l and a detection limit of about 50 ng/l.

Electrochemical detection of DNA immobilized on gold colloid particles modified self-assembled monolayer electrode with silver nanoparticle label.

The target DNA was immobilized successfully on gold colloid particles associated with a cysteamine monolayer on gold electrode surface. Self-assembly of colloidal Au onto a cysteamine modified gold electrode can enlarge the electrode surface area and enhance greatly the amount of immobilized single stranded DNA (ssDNA). The electron-transfer processes of [Fe(CN)6](4-)/[Fe(CN)6](3-) on the gold surface were blocked due to the procedures of the target DNA immobilization, which was investigated by impedance spectroscopy. Then single stranded target DNA immobilized on the gold electrode hybridized with the silver nanoparticle-oligonucleotide DNA probe, followed by the release of the silver metal atoms anchored on the hybrids by oxidative metal dissolution, and the indirect determination of the released solubilized Ag(I) ions by anodic stripping voltammetry (ASV) at a carbon fiber microelectrode. The results show that this method has good correlation for DNA detection in the range of 10-800 pmol/l and allows the detection level as low as 5 pmol/l of the target oligonucleotides.