Development and validation of a large animal ovine model for implant-associated spine infection using biofilm based inocula.

Postoperative implant-associated spine infection remains poorly understood. Currently there is no large animal model using biofilm as initial inocula to study this challenging clinical entity. The purpose of the present study was to develop a sheep model for implant-associated spine infection using clinically relevant biofilm inocula and to assess the in vivo utility of methylene blue (MB) for visualizing infected tissues and guiding debridement. This 28-day study used five adult female Rambouillet sheep, each with two non-contiguous surgical sites- in the lumbar and thoracic regions- comprising randomized positive and negative infection control sites. A standard mini-open approach to the spine was performed to place sterile pedicle screws and Staphylococcus aureus biofilm-covered (positive control), or sterile (negative control) spinal fusion rods. Surgical site bioburden was quantified at the terminal procedure. Negative and positive control sites were stained with MB and staining intensity quantified from photographs. Specimens were analyzed with x-ray, micro-CT and histologically. Inoculation rods contained ∼10.44 log10 colony forming units per rod (CFU/rod). Biofilm inocula persisted on positive-control rod explants with ∼6.16 log10 CFU/rod. There was ∼6.35 log10 CFU/g of tissue in the positive controls versus no identifiable bioburden in the negative controls. Positive controls displayed hallmarks of deep spine infection and osteomyelitis, with robust local tissue response, bone resorption, and demineralization. MB staining was more intense in infected, positive control sites. This work presents an animal-efficient sheep model displaying clinically relevant implant-associated deep spine infection.

Treatment of Recalcitrant Femoral Shaft Nonunion With Medial Femoral Condyle Pedicled Autograft: Technical Trick.

SUMMARY: Nonunited fractures of the femoral shaft and distal femur are usually successfully addressed with stabilization with or without autogenous bone grafting. For the small subset of these problems that prove recalcitrant to front-line treatment, a pedicled medial femoral condyle (MFC) bone flap can provide a source of vascularized autograft with minimal donor site morbidity. The MFC has gained recent widespread adoption as a free vascularized bone transfer, and here, we present a surgical technique and retrospective analysis of patients treated with a pedicled MFC technique. This serves as a useful treatment option for these difficult problems and may be especially helpful in low resource environments or where microsurgical anastomosis is not feasible.

Long-Term Impact of Vascular Surgery Stress on Frail Older Patients.

BACKGROUND: Frailty is a syndrome where the ability to cope with acute physiological stress is compromised, although it is unclear what impact this stress has on long-term outcomes. Vascular-Physiological and Operative Severity Score for enumeration of Mortality and Morbidity is a validated method for calculating levels of stress associated with vascular procedures. We designed this study to evaluate the long-term impact of different levels of surgical stress among frail older patients undergoing vascular surgery procedures. METHODS: We identified all independently living patients who underwent prospective frailty assessment followed by an elective vascular surgery procedure captured in the Vascular Quality Initiative registry (endovascular abdominal aortic aneurysm [AAA] repair, thoracic endovascular aortic repair, suprainguinal and infrainguinal bypass, peripheral vascular intervention, carotid endarterectomy, and open AAA) at an academic institution between January 2016 and July 2018. Patient- and procedure-level data were obtained from our institutional data warehouse and Vascular Quality Initiative database, and used to calculate Vascular-Physiological and Operative Severity Score for enumeration of Mortality and Morbidity scores. The association between frailty and composite outcome of any major complications (surgical site infection; graft thrombectomy; major amputation; adverse cardiac, pulmonary, or neurologic event; acute renal insufficiency; and/or reoperation related to the index procedure), nonhome living status, or death within 1 year after low-, medium-, and high-stress vascular procedures was evaluated using bivariate and logistic regression models. RESULTS: A total of 163 patients were identified (70% male, mean age 67.8 years) who underwent open AAA repair (6%), endovascular AAA repair (21%), thoracic endovascular aortic repair (7%), suprainguinal bypass (5%), infrainguinal bypass (18%), carotid endarterectomy (18%), or peripheral vascular interventions (25%), which included 44 (27%) patients diagnosed with frailty before surgery. Overall, frail patients had significantly higher rates of the 1-year composite outcome (48% frail versus 27% nonfrail; P = 0.012) when compared with nonfrail patients, with a significant dose-dependent effect as the level of stress increased. In comparison, increasing levels of surgical stress had a negligible effect on long-term outcomes among nonfrail patients. The interaction between frailty and high surgical stress was found in adjusted regression models to be a significant predictor of adverse outcomes within 1 year after vascular surgery (odds ratio, 3.3; 95% confidence interval, 1.3-8.6; P < 0.01). CONCLUSIONS: Frail patients who undergo high-stress vascular procedures have a significantly higher rate of complications leading to loss of functional independence and mortality within the year after their surgery. These data suggest that estimates of surgical stress should be incorporated into clinical decision making for frail older patients before and after surgery.

Ten-Year Survivorship, Patient-Reported Outcomes, and Satisfaction of a Fixed-Bearing Unicompartmental Knee Arthroplasty.

BACKGROUND: We sought to determine the 10-year survivorship and reasons for revision for a fixed-bearing unicompartmental knee arthroplasty (UKA) design. In addition, we report on patient-reported outcomes and satisfaction and compare results of medial vs lateral compartment UKA and cemented vs cementless UKA with the same design. METHODS: We performed a retrospective cohort study on a single-surgeon case series using a single fixed-bearing UKA design in 158 consecutive patients who underwent 177 UKA procedures between July 2000 and December 2010. Cases missing follow-up within the last year, clinically or via telephone, were excluded (n = 17, 10%). A cumulative incidence competing risk model was used to evaluate the cumulative incidence of failure. RESULTS: Cumulative incidence of revision at a mean follow-up of 10 years was 13%. The majority of revisions (43%, 10/23) were for aseptic tibial component loosening, followed by progression of osteoarthritis (5/23, 22%). All Patient Reported Outcomes Measurement Information System measures demonstrated mean T-scores within one standard deviation from the US population norm. The mean Knee Injury and Osteoarthritis Outcome Score for Joint Replacement was 96.9 (range, 40-100). The mean pain score was 3.8 (range, 0-8). Eighty-six percent of patients were satisfied with the UKA. CONCLUSIONS: At 10-year follow-up, the most common causes for revision were aseptic tibial loosening and adjacent compartment knee arthroplasty, and similar results were found for medial vs lateral compartment and for cemented vs cementless UKA. Surgeons should consider these findings for future UKA designs, and this represents the first study reporting on survivorship and outcomes of this specific UKA design.

Is the Fibular Station on Lateral Ankle Radiographs Symmetric? A Retrospective Observational Radiographic Study.

BACKGROUND: Precise reduction of a syndesmosis after disruption is critical to improve patient physical function. Intraoperative lateral radiographs of the unaffected ankle are often used in clinical practice as a template for anatomic syndesmotic reduction because sagittal plane malreduction is common. However, there is little data to suggest fibular station, or the position of the fibula in the AP plane on the lateral radiograph, is symmetric side-to-side in patients. QUESTIONS/PURPOSES: (1) Is the position of the fibula in the AP plane (fibular station) on lateral ankle radiographs symmetric in an individual? (2) Do the measurements used to judge the position of the fibula on lateral radiographs have good inter- and intraobserver reliability? METHODS: Over the period from August 2016 to October 2018, we identified 478 patients who presented to an orthopaedic clinic with forefoot and midfoot complaints. Skeletally mature patients with acceptable bilateral lateral ankle radiographs, which are common radiographs obtained for new patients to clinic for any complaint, were included. Based on that, 52% (247 of 478 patients) were included with most (22%, 107 patients) excluded for poor lateral radiographs. The most common diagnosis in the patient cohort was midfoot OA (14%, 35 patients). The median (range) age of the included patients was 54 years (15 to 88), and 65% (159 of 247) of the patients were female. Fibular station, defined as the position of the fibula in the AP plane, and fibular length were measured using a digital ruler and goniometer on lateral radiographs. A paired t-test was used to determine if no difference in fibular station existed between the left and right ankles. With 247 paired-samples, with 80% power and an alpha level of 0.05, we could detect a difference between sides of 0.008 for the posterior ratio, 0.010 for the anterior ratio, and 0.012 for fibular length. Two readers, one fellowship-trained orthopaedic traumatologist and one PGY-4, measured 40 patients to determine the inter- and intraobserver reliability by intraclass correlation coefficient (ICC). RESULTS: The posterior fibular station (mean right 0.147 [σ = 0.056], left 0.145 [σ = 0.054], difference = 0.03 [95% CI 0 to 0.06]; p = 0.59), anterior fibular station (right 0.294 [σ = 0.062], left 0.299 [σ = 0.061], difference = 0.04 [95% CI 0 to 0.08]; p = 0.20), and fibular length (right 0.521 [σ = 0.080], left 0.522 [σ = 0.078], difference = 0.05 [95% CI 0.01 to 0.09]; p = 0.87) ratios did not differ with the numbers available between ankles. Inter- and intraobserver reliability were excellent for the posterior ratio (ICC = 0.928 and ICC = 0.985, respectively) and the anterior ratio (ICC = 0.922 and ICC = 0.929, respectively) and moderate-to-good for the fibular length ratio (ICC = 0.732 and ICC = 0.887, respectively). CONCLUSION: The use of lateral radiographs of the contralateral uninjured ankle appears to be a valid template for determining the position of the fibula in the sagittal plane. However, further prospective studies are required to determine the efficacy of this method in reducing the syndesmosis over other methods that exists. LEVEL OF EVIDENCE: Level III, diagnostic study.

Is load application necessary when using computed tomography scans to diagnose syndesmotic injuries? A cadaver study.

BACKGROUND: Injuries to the distal tibio-fibular ligaments are common. While pronounced injuries can be reliably diagnosed using conventional radiographs, assessment of subtle syndesmotic injuries is challenging. This cadaver study determines the impact of loading on the assessment of incomplete and more complete syndesmotic injuries when using weightbearing computed tomography (CT) scans. METHODS: Fourteen paired male cadavers (tibial plateau to toe-tip) were included. A radiolucent frame held specimens in a plantigrade position while both non-weightbearing and weightbearing computed tomography (CT) scans were taken. The following conditions were tested: First, intact ankles (Native) were scanned. Second, one specimen from each pair underwent anterior inferior tibio-fibular ligament (AITFL) transection (Condition 1A), while the contralateral underwent deltoid transection (Condition 1B). Third, the remaining intact deltoid or AITFL was transected from each specimen (Condition 2). Finally, the distal tibiofibular interosseous membrane (IOM) was transected in all ankles (Condition 3). Eight different measurements were performed to assess the integrity of the distal tibio-fibular syndesmosis on axial CT scans. RESULTS: Load application had no impact on most measurements. While incomplete syndesmotic injuries could not be identified, cadavers with more complete injuries differentiated from native ankles when assessed using axial CT images. No significant difference was evident between discrete AITFL or deltoid ligament transection. CONCLUSIONS: In a cadaver model, load application had no effect on the assessment of the distal tibio-fibular syndesmosis in incomplete and more complete syndesmotic injuries. Only more complete injuries of the distal tibio-fibular syndesmosis could be identified using axial CT images.

Traction Time, Force and Postoperative Nerve Block Significantly Influence the Development and Duration of Neuropathy Following Hip Arthroscopy.

PURPOSE: To (1) evaluate the individual and combined effects of traction time and traction force on postoperative neuropathy following hip arthroscopy, (2) determine if perioperative fascia iliaca block has an effect on the risk of this neuropathy, and (3) identify if the these items had a significant association with the presence, location, and/or duration of postoperative numbness. METHODS: Between February 2015 and December 2016, a consecutive cohort of hip arthroscopy patients was prospectively enrolled. Traction time, force, and postoperative nerve block administration were recorded. The location and duration of numbness were assessed at postoperative clinic visits. Numbness location was classified into regions: 1, groin; 2, lateral thigh; 3, medial thigh; 4, dorsal foot; and 5,preoperative thigh or radiculopathic numbness. RESULTS: A total of 156 primary hip arthroscopy patients were analyzed, 99 (63%) women and 57 (37%) men. Mean traction time was 46.5 ± 20.3 minutes. Seventy-four patients (47%) reported numbness with an average duration of 157.5 ± 116.2 days. Postoperative fascia iliaca nerve block was a significant predictor of medial thigh numbness (odds ratio, 3.36; 95% confidence interval, 1.46-7.76; P = .04). Neither traction time nor force were associated with generalized numbness (P = .85 and P = .40, respectively). However, among those who experienced numbness, traction time and force were greater in patients with combined groin and lateral thigh numbness compared with those with isolated lateral thigh or medial thigh numbness (P = .001 and P = .005, respectively). CONCLUSIONS: Postoperative neuropathy is a well-documented complication following hip arthroscopy. Concomitant pudendal and lateral femoral cutaneous nerve palsy may be related to increased traction force and time, even in the setting of low intraoperative traction time (<1 hour). Isolated medial thigh numbness is significantly associated with postoperative fascia iliaca blockade. LEVEL OF EVIDENCE: IV, case series.

Torque application helps to diagnose incomplete syndesmotic injuries using weight-bearing computed tomography images.

OBJECTIVE: Accurate identification of distal tibio-fibular syndesmotic injuries is essential to limit potential deleterious post-traumatic effects. To date, conventional radiographs, computed tomography (CT), and magnetic resonance imaging (MRI) have shown limited utilization. This cadaver study evaluates the utility of weight-bearing CT scans on the assessment of incomplete and more complete syndesmotic injuries. MATERIALS AND METHODS: Ten male cadavers (tibial plateau to toe-tip) were included. Weight-bearing CTs were taken under four test conditions, with and without torque on the tibia (corresponding to external rotation of the foot and ankle). First, intact ankles (native) underwent imaging. Second, the anterior-inferior tibio-fibular ligament (AITFL) was transected (condition 1). Then, the deltoid ligament (condition 2) was transected, followed by the interosseous membrane (IOM, condition 3). Finally, the posterior-inferior tibio-fibular ligament (PITFL) was transected (condition 4). The medial clear space (MCS), the tibio-fibular clear space (TFCS), and the tibio-fibular overlap (TFO) were assessed on digitally reconstructed radiographs (DRRs), and on axial CT images. RESULTS: The TFO differentiated isolated AITFL transection from native ankles when torque was applied. Also under torque conditions, the MCS was a useful predictor of an additional deltoid ligament transection, whereas the TFCS identified cadavers in which the PITFL was also transected. CONCLUSION: Torque application helps to diagnose incomplete syndesmotic injuries when using weight-bearing CT. The TFO may be useful for identifying incomplete syndesmotic injuries, whereas the MCS and TFCS predict more complete injuries.

Impact of Torque on Assessment of Syndesmotic Injuries Using Weightbearing Computed Tomography Scans.

BACKGROUND: The diagnosis of subtle injuries to the distal tibiofibular syndesmosis remains elusive. Conventional radiographs miss a large subset of injuries that present without frank diastasis. This study evaluated the impact of torque application on the assessment of syndesmotic injuries when using weightbearing computed tomography (CT) scans. METHODS: Seven pairs of male cadavers (tibia plateau to toe-tip) were included. CT scans with axial load application (85 kg) and with (10 Nm) or without torque to the tibia (corresponding to external rotation of the foot and ankle) were taken during 4 test conditions. First, intact ankles (native) were scanned. Second, 1 specimen from each pair underwent anterior inferior tibiofibular ligament (AITFL) transection (condition 1A), while the contralateral underwent deltoid transection (condition 1B). Third, the lesions were reversed on the same specimens and the remaining intact deltoid or AITFL was transected (condition 2). Finally, the distal tibiofibular interosseous membrane (IOM) was transected in all ankles (condition 3). Measurements were performed to assess the integrity of the distal tibiofibular syndesmosis on digitally reconstructed radiographs (DRRs) and on axial CT scans. RESULTS: Torque impacted DRR and axial CT scan measurements in almost all conditions. The ability to diagnose syndesmotic injuries using axial CT measurements improved when torque was applied. No significant syndesmotic morphological change was observed with or without torque for either isolated AITFL or deltoid ligament transection. DISCUSSION: Torque application had a notable impact on two-dimensional (2-D) measurements used to diagnose syndesmotic injuries for both DRRs and axial CT scans. Because weightbearing conditions allow for standardized positioning of the foot while radiographs or CT scans are taken, the combination of axial load and torque application may be desirable. CLINICAL RELEVANCE: Application of torque to the tibia impacts 2-D measurements and may be useful when diagnosing syndesmotic injuries by DRRs or axial CT images.

Conversion of painful tibiotalocalcaneal arthrodesis to total ankle replacement using a 3-component mobile bearing prosthesis.

BACKGROUND: The aim of this study was to assess the short-term clinical and radiographic outcomes in patients who underwent conversion of a painful tibiotalocalcaneal arthrodesis to a total ankle replacement. METHODS: Six patients with painful ankle arthrodesis after tibiotalocalcaneal arthrodesis were included in this study. In all patients, conversion to total ankle replacement was performed using a 3rd-generation, non-constrained, cementless three-component prosthesis. The outcomes were analyzed at a mean follow-up of 3.4±1.9years (range 1.0-6.5). RESULTS: One patient with painful arthrofibrosis underwent two open arthrolysis procedures at 1.2 and 5.6 years post index surgery, respectively. No revision of tibial or talar prosthesis components was necessary in this study. All patients reported significant pain relief and significant improvement in functional status. CONCLUSION: In the present study, the conversion of a painful ankle arthrodesis following tibiotalocalcaneal arthrodesis to a total ankle replacement was a reliable surgical treatment.

A Hydrogel Meniscal Replacement: Knee Joint Pressure and Distribution in an Ovine Model Compared to Native Tissue.

Pressure distribution of the native ovine knee meniscus was compared to a medial meniscectomy and three treatment conditions including a suture reattachment of the native tissue, an allograft, and a novel thermoplastic elastomer hydrogel (TPE) construct. The objective of this study was to assess the efficacy of a novel TPE hydrogel construct at restoring joint pressure and distribution. Limbs were loaded in uniaxial compression at 45°, 60°, and 75° flexion and from 0 to 181 kg. The medial meniscectomy decreased contact area by approximately 50% and doubled the mean and maximum pressure reading for the medial hemijoint. No treatment condition tested within this study was able to fully restore medial joint contact area and pressures to the native condition. A decrease in lateral contact area and increase in pressures with the meniscectomy was also seen; and to some degree, all reattachment and replacement conditions including the novel TPE hydrogel replacement helped to restore lateral pressures. Although the TPE construct did not perform as well as hoped in the medial compartment, it performed as well as, if not better, than the other reattachment and replacement options in the lateral. Further work is necessary to determine the best anchoring and attachment methods.

Mechanical viability of a thermoplastic elastomer hydrogel as a soft tissue replacement material.

Hydrogels are a class of synthetic biomaterials composed of a polymer network that swells with water and as such they have both an elastic and viscous component making them ideal for soft tissue applications. This study characterizes the compressive, tensile, and shear properties of a thermoplastic elastomer (TPE) hydrogel and compares the results to published literature values for soft tissues such as articular cartilage, the knee meniscus, and intervertebral disc components. The results show the TPE hydrogel material is viscoelastic, strain rate dependent, has similar surface and bulk properties, displays minimal damping under dynamic load, and has tension-compression asymmetry. When compared to other soft tissues it has a comparable equilibrium compressive modulus of approximately 0.5MPa and shear modulus of 0.2MPa. With a tensile modulus of only 0.2MPa though, the TPE hydrogel is inferior in tension to most collagen based soft tissues. Additional steps may be necessary to reinforce the hydrogel system and increase tensile modulus depending on the desired soft tissue application. It can be concluded that this material could be a viable option for soft tissue replacements.

Nanostructure-Driven Replication of Soft Tissue Biomechanics in a Thermoplastic Elastomer Hydrogel.

Synthesis of hydrogel networks capable of accurately replicating the biomechanical demands of musculoskeletal soft tissues continues to present a formidable materials science challenge. Current systems are hampered by combinations of limited moduli at biomechanically relevant strains, inefficiencies driven by undesirable hysteresis and permanent fatigue, and recovery dynamics too slow to accommodate rapid cycling prominent in most biomechanical loading profiles. Here, we report on a novel paradigm in hydrogel design based on prefabrication of an efficient nanoscale network architecture using the melt-state self-assembly of amphiphilic block copolymers. Rigorous characterization and mechanical testing reveal that swelling of these preformed networks produces hydrogels with physiologically relevant moduli and water compositions, negligible hysteresis, subsecond elastic recovery rates, and unprecedented resistance to fatigue over hundreds of thousands of compression cycles. Furthermore, by relying only on simple thermoplastic processing to form these nanostructured networks, the synthetic complexities common to most solution-based hydrogel fabrication strategies are completely avoided.

Weightbearing Computed Tomography of the Foot and Ankle: Emerging Technology Topical Review.

In the last decade, cone-beam computed tomography technology with improved designs allowing flexible gantry movements has allowed both supine and standing weight-bearing imaging of the lower extremity. There is an increasing amount of literature describing the use of weightbearing computed tomography in patients with foot and ankle disorders. To date, there is no review article summarizing this imaging modality in the foot and ankle. Therefore, we performed a systematic literature review of relevant clinical studies targeting the use of weightbearing computed tomography in diagnosis of patients with foot and ankle disorders. Furthermore, this review aims to offer insight to those with interest in considering possible future research opportunities with use of this technology. LEVEL OF EVIDENCE: Level V, expert opinion.

Brush Polymer of Donor-Accepter Dyads via Adduct Formation between Lewis Base Polymer Donor and All Carbon Lewis Acid Acceptor.

A synthetic method that taps into the facile Lewis base (LB)→Lewis acid (LA) adduct forming reaction between the semiconducting polymeric LB and all carbon LA C60 for the construction of covalently linked donor-acceptor dyads and brush polymer of dyads is reported. The polymeric LB is built on poly(3-hexylthiophene) (P3HT) macromers containing either an alkyl or vinyl imidazolium end group that can be readily converted into the N-heterocyclic carbene (NHC) LB site, while the brush polymer architecture is conveniently constructed via radical polymerization of the macromer P3HT with the vinyl imidazolium chain end. Simply mixing of such donor polymeric LB with C60 rapidly creates linked P3HT-C60 dyads and brush polymer of dyads in which C60 is covalently linked to the NHC junction connecting the vinyl polymer main chain and the brush P3HT side chains. Thermal behaviors, electronic absorption and emission properties of the resulting P3HT-C60 dyads and brush polymer of dyads have been investigated. The results show that a change of the topology of the P3HT-C60 dyad from linear to brush architecture enhances the crystallinity and Tm of the P3HT domain and, along with other findings, they indicate that the brush polymer architecture of donor-acceptor domains provides a promising approach to improve performances of polymer-based solar cells.

Dynamic compression of human and ovine meniscal tissue compared with a potential thermoplastic elastomer hydrogel replacement.

Understanding how human meniscal tissue responds to loading regimes mimetic of daily life as well as how it compares to larger animal models is critical in the development of a functionally accurate synthetic surrogate. Seven human and eight ovine cadaveric meniscal specimens were regionally sectioned into cylinders 5 mm in diameter and 3 mm thick along with 10 polystyrene-b-polyethylene oxide block copolymer-based thermoplastic elastomer (TPE) hydrogels. Samples were compressed to 12% strain at 1 Hz for 5000 cycles, unloaded for 24 h, and then retested. No differences were found within each group between test one and test two. Human and ovine tissue exhibited no regional dependency (p < 0.05). Human samples relaxed quicker than ovine tissue or the TPE hydrogel with modulus values at cycle 50 not significantly different from cycle 5000. Ovine menisci were found to be similar to human menisci in relaxation profile but had significantly higher modulus values (3.44 MPa instantaneous and 0.61 MPa after 5000 cycles compared with 1.97 and 0.11 MPa found for human tissue) and significantly different power law fit coefficients. The TPE hydrogel had an initial modulus of 0.58 MPa and experienced less than a 20% total relaxation over the 5000. Significant differences in the magnitude of compressive modulus between human and ovine menisci were observed, however the relaxation profiles were similar. Although statistically different than the native tissues, modulus values of the TPE hydrogel material were similar to those of the human and ovine menisci, making it a material worth further investigation for use as a synthetic replacement. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2722-2728, 2017.

Can a Three-Component Prosthesis be Used for Conversion of Painful Ankle Arthrodesis to Total Ankle Replacement?

BACKGROUND: In patients with painful ankle arthrodesis, the surgical treatment is challenging, and may include takedown of ankle arthrodesis and conversion to a total ankle replacement (TAR). This procedure is technically demanding given the altered anatomy after arthrodesis. Few studies have evaluated TAR in the setting of prior arthrodesis. QUESTIONS/PURPOSES: (1) What intraoperative and perioperative complications were observed in patients who underwent conversion of an ankle arthrodesis to a TAR? (2) Was durable fixation achieved at short term, and what was the alignment of the components? (3) What subsequent surgical procedures were performed, including revisions? (4) What improvements were observed in pain, tibiotalar range of motion (ROM), and quality of life? METHODS: Between January 2007 and December 2014, 18 patients with a painful ankle arthrodesis underwent conversion to TAR at our tertiary referral center. During this period, the indications for conversion of ankle arthrodesis to TAR were tibiotalar nonunion or malunion after attempted arthrodesis in patients who declined revision ankle arthrodesis. The goal of revision surgery was to help patients regain hindfoot mobility and to decrease pain. During the study period, all patients who met indications were treated with a conversion procedure. Of the 18 patients included, 14 were men and four were women. The mean age of the patients was 51 ± 7 years. The mean followup was 54 ± 27 months, with no loss to follow up observed. The initial ankle arthrodesis was performed 6 ± 3.5 years before conversion to TAR. In all patients, the conversion to TAR was performed using a nonconstrained cementless three-component prosthesis. Intraoperative and postoperative complications, revision procedures, and prosthesis component loosening were evaluated. Weightbearing radiographs were used to determine the angular alignment of the tibial and talar components using α/ß/γ angles and to analyze the bone-implant interface. Osseointegration was defined as visible trabecular structures at the bone-implant interface without radiolucent lines. The criteria for radiographic loosening was defined as subsidence or migration of prosthesis components and/or a cystic lesion with a diameter at least 2 mm. Clinical assessment included pain evaluation, measurement of ankle ROM, and quality of life. RESULTS: Two of the 18 patients sustained an intraoperative medial malleolar fracture. In three patients, delayed wound healing was observed. At latest followup, four patients had incomplete osseointegration (posterior quarter of the bone-prosthesis interface on the tibial side). None of the 18 patients had prosthesis loosening. In all patients, both components were neutrally aligned. Two patients had painful arthrofibrosis with reduced ROM, which we treated with an open arthrolysis and exchange of mobile-bearing inlay; one other patient is considering a revision for substantial tibial component medial tilt with collapse of the medial arch. At the latest followup, the mean dorsiflexion and plantar flexion were 8.5° ± 3° and 15° ± 5°, respectively. The mean visual analog scale (VAS) score decreased from 9 ± 0.8 to 1.7 ± 1.6 (p < 0.001). The Short Form Health Survey questionnaire (SF-36) physical and mental outcome scores improved from 34 ± 5 to 74 ± 11 (p < 0.001) and from 49 ± 4 to 75.5 ± 7 (p < 0.001). CONCLUSIONS: Conversion of an ankle arthrodesis to a TAR is a technically challenging procedure. In this small series, it was associated with frequent complications including arthrofibrosis, and functional outcomes including postoperative ROM were lower than reported for primary TAR. However, pain and function did improve. Further studies are necessary to address long-term clinical and radiographic outcomes in this patient cohort. LEVEL OF EVIDENCE: Level IV, therapeutic study.

Stereoregular Brush Polymers and Graft Copolymers by Chiral Zirconocene-Mediated Coordination Polymerization of P3HT Macromers.

Two poly(3-hexylthiophene) (P3HT) macromers containing a donor polymer with a polymerizable methacrylate (MA) end group, P3HT-CH2-MA and P3HT-(CH2)2-MA, have been synthesized, and P3HT-(CH2)2-MA has been successfully homopolymerized and copolymerized with methyl methacrylate (MMA) into stereoregular brush polymers and graft copolymers, respectively, using chiral ansa-zirconocene catalysts. Macromer P3HT-CH2-MA is too sterically hindered to polymerize by the current Zr catalysts, but macromer P3HT-(CH2)2-MA is readily polymerizable via either homopolymerization or copolymerization with MMA in a stereospecific fashion with both C2-ligated zirconocenium catalyst 1 and Cs-ligated zirconocenium catalyst 2. Thus, highly isotactic (with mm% ≥ 92%) and syndiotactic (with rr% ≥ 93%) brush polymers, it-PMA-g-P3HT and st-PMA-g-P3HT, as well as well-defined stereoregular graft copolymers with different grafted P3HT densities, it-P(M)MA-g-P3HT and st-P(M)MA-g-P3HT, have been synthesized using this controlled coordination-addition polymerization system under ambient conditions. These stereoregular brush polymers and graft copolymers exhibit both thermal (glass and melting) transitions with Tg and Tm values corresponding to transitions within the stereoregular P(M)MA and crystalline P3HT domains. Acceptor molecules such as C60 can be effectively encapsulated inside the helical cavity of st-P(M)MA-g-P3HT to form a unique supramolecular helical crystalline complex, thus offering a novel strategy to control the donor/acceptor solar cell domain morphology.