Advanced imaging of dentin microstructure.

This study aimed to demonstrate the feasibility of using optical coherence tomography (OCT) for locating the sectioning site of a specimen before characterizing the ultrastructural features of dentin surfaces as well as the inner wall of the dentinal tubules (DT) using a field emission scanning electron microscope (FESEM). Eight sound human molar teeth were extracted, examined via cross-polarization optical coherence tomography (CP-OCT), embedded, and hemisectioned using a low-speed diamond sawing machine. Next, each sectioned surface was further trimmed, polished, and examined under a confocal laser scanning microscope (CLSM) to locate the target area on the superficial dentin. Subsequently, each section was gold-coated and examined using FESEM. Backscattered reflection from the dentin layer was less than that from the enamel under CP-OCT. Distinct reflections from certain enamel and dentin microstructures were observed before sectioning the specimens. Areas with enamel cracks and dentin defects were identified and avoided during sectioning. At the micron level, the CLSM images exhibited a homogenous distribution of the DT orifices. Low magnification FESEM images showed intertubular dentin as a loosely condensed globular layer with shallow grooves in between, whereas peritubular dentin exhibited more organized condensation of apatite crystals surrounding the DT orifices. High magnification of the DT revealed a cross-linking layer of mineralized collagen network extending in the peri-intratubular lumen, with scattered globules of matrix vesicles. CP-OCT enabled the realization of rapid initial scanning and image acquisition with high contrast at the micron scale before profound insights into dentin ultrastructures at the nano scale were provided by FESEM. The variations in structural densities of the dental tissues significantly affected the image contrast and helped identify underlying structures.

The Effect of Thermocycling on Interfacial Bonding Stability of Self-Etch Adhesives: OCT Study.

OBJECTIVE: The aim of this study was to monitor the behavior of interfacial gaps formed under different bonded polymeric restorations before and after thermocycling (TC), using swept-source optical coherence tomography (SS-OCT) and confirming the obtained findings with confocal laser scanning microscopy (CLSM). MATERIALS AND METHODS: Cylindrical class I cavities were prepared in twenty noncarious human premolar teeth (1.5 mm depth × 3.5 mm diameter) and divided randomly into two groups: TS and SN, according to the adhesive system (n = 10). In the TS group, one-step self-etch adhesive Clearfil Tri-S Bond Plus (Kuraray Noritake Dental, Japan) was used, followed by composite restoration using Estelite Sigma Quick (Tokuyama Dental, Japan). In the SN group, the cavities were restored with the two-step self-etch/composite silorane-based resin restoration system (3M ESPE, USA). All specimens were restored in bulk filling technique and cured in accordance with the manufacturers' instructions. Both groups were imaged under SS-OCT after 24 h and recorded as controls. Then, each group was subjected to thermal challenge using the TC machine (5-55°C) and B-scans were recorded at different TC intervals (2600, 5200, and 10000). In order to confirm the SS-OCT findings, additional specimens were prepared, scanned, and sectioned for CLSM observation. RESULTS: B-scans demonstrated white clusters at the tooth-resin interface that corresponded to the gap location on CLSM images. The TS group showed significantly less gap formation than the SN group before and after TC (p < 0.001). CONCLUSIONS: An optimal composite adaptation can be achieved when the bonded restoration comprises a combination of an adhesive containing 10-MDP monomer and a considerable highly filled composite.

Nondestructive evaluation of microleakage in restored primary teeth using CP-OCT.

BACKGROUND: Although the demand for esthetic filling of primary teeth with resin composite is increasing, there is no enough data on the adhesive performance of composite restorations in primary teeth. Despite the improvements in resin composites, interfacial gap is still a disadvantage as it may cause marginal staining, secondary caries, and restoration failure. Previous studies have validated the efficiency of optical coherence tomography (OCT) in the evaluation of adhesive interface in permanent teeth, but not in primary teeth. AIMS: The aim of this study was to assess microleakage upon composite restorations in primary teeth using cross-polarization OCT (CP-OCT). METHODOLOGY: Cylindrical class-V cavities were prepared in extracted human primary second molars and divided into four groups randomly. In groups 1 and 2, cavities were restored using Tetric N-Universal adhesive in the self-etch mode followed by IPS Impress Direct Composite and Ceram.x One Universal composite, respectively. In groups 3 and 4, one-step self-etch Prime and Bond Elect adhesive was used followed by ID composite and CX composite in groups 3 and 4, respectively. The specimens were then immersed in a contrasting solution followed by interfacial microleakage examination under CP-OCT. The recorded images were analyzed to quantify the mean gap percentages. RESULTS: All tested groups showed variable degree of interfacial microleakage under composite restorations. Two-way ANOVA showed the composite factor was significantly influencing the results, unlike the adhesive. Group 1 and 2 had the lowest and highest mean gap percentage, respectively, which were significantly different from the other groups. Groups 3 and 4 were not significantly different. CONCLUSION: Based on the current finding, a polymeric restorative system from the same manufacturer reduces the risk of interfacial microleakage in primary teeth.

Tomographic Evaluation of the Internal Adaptation for Recent Calcium Silicate-Based Pulp Capping Materials in Primary Teeth.

OBJECTIVES: To evaluate the internal adaptation of recent pulp capping materials (TheraCal and Biodentine) relative to MTA when used as indirect pulp capping for primary teeth. MATERIALS AND METHODS: Thirty primary molars were randomly allocated into three groups, group (A) was TheraCal, group (B) was Biodentine, and MTA was the control group (C). A standardized round class-V cavity (1.5 mm diameter and 2 mm depth) was prepared using a milling machine on the buccal surface of each tooth with the pulpal floor located on the dentin. Then, pulp-capping materials were applied. Finally, all teeth were restored by composite restoration. The internal adaptation of the pulp-capping materials to the dentinal surface was investigated by microcomputed tomography (Micro-CT) to determine the internal gap volume, and by optical coherence tomography (OCT) to determine the high-intensity reflection of light from the floor. RESULTS: Based on Micro-CT findings, TheraCal showed significantly higher internal gap volume than both MTA and Biodentine (p < 0.001), while MTA and Biodentine did not show a significant difference in the gap volume. Based on the OCT findings, TheraCal showed a significantly higher intensity of light reflection than both MTA and Biodentine (p < 0.001); however, there was no significant difference between MTA and Biodentine. Pearson's correlation test showed that there was a strong positive correlation between Micro-CT and OCT (r = 0.686, N = 30, p < 0.001). CONCLUSIONS: Biodentine and MTA showed a comparable result in terms of their internal adaptation on the dentinal surface of the primary teeth, and both were better than TheraCal. There is a moderate to a strong positive correlation between Micro-CT and OCT in the measurement of internal adaptation of the tested pulp capping materials. OCT can be helpful and beneficial for the clinical setting and allow dentists to screen and evaluate restorations during follow-up.

Novel evaluation and treatment techniques for white spot lesions. An in vitro study.

OBJECTIVE: White spot lesions (WSLs) are commonly seen during and after orthodontic treatment. Therefore, the objective of this in vitro study was to assess the effect of 45S5-bioglass in remineralizing WSLs using cross-polarization optical coherence tomography (CP-OCT) and confirm the findings by micro-hardness test. METHODS: Ceramic orthodontic brackets were bonded to the buccal surface of 45 human premolars with Transbond XT primer followed by Transbond PLUS according to the manufacturer's instructions. Then, all specimens were varnished excluding the area of interest (AOI) around the bonded brackets, immersed in demineralizing solution and divided into three groups: BG, REM and CONT. In BG group, 15 specimens were treated with bioglass paste for 24 hours. REM group had 15 specimens stored in remineralization solution for 24 hours. CONT group had the remaining 15 specimens with no treatment. All specimens were examined under CP-OCT and tested using cross-sectional micro-hardness techniques. RESULTS: CP-OCT analysis showed that the maximum pixel value after bioglass application was significantly increased at AOI when compared to CONT and REM groups (P>.05), which was confirmed by the cross-sectional micro-hardness results (P>.05). CONCLUSION: Early enamel demineralization and remineralization can be easily and non-invasively monitored with CP-OCT. Bioglass is a potent remineralizing agent.

Ultramorphological assessment of dentin-resin interface after use of simplified adhesives.

This study assessed dentin-resin interface integration in Class I cavities restored with simplified adhesives by using a focused ion-beam milling (FIB) and transmission electron microscope (TEM). Class I cavities (1.5-mm depth with dentin thickness of ∼0.5 mm, 4-mm length, and 2-mm width) were prepared on freshly extracted, sound human molars. Two all-in-one adhesive systems (Scotchbond/Single Bond Universal [SUD] and Xeno-V(+) [X5D]) were used and compared with a two-step etch-and-rinse system (Prime&Bond NT [NTD]). The adhesives were applied according to the manufacturers' guidelines. A universal resin composite (Filtek Z350 XT Universal) was used to restore the cavities in one bulk filling and was irradiated at 550 mW/cm(2) for 40 seconds by a quartz-tungsten-halogen light (Optilux 501). After exposure to liquid nitrogen coolant, the specimens were milled to nanoscale thickness by FIB to view and then assess the area of dentin-resin interface by TEM. Unlike the unfilled X5D, a noticeably smooth transition zone at the dentin-resin interface was shown for the SUD and NTD adhesives. The SUD demonstrated an uneven hybrid layer with clearly demineralized collagen bundles. Ultramorphologically, dispersed needlelike apatite crystals were detected within the partially demineralized dentin or the hybrid layer of both compositionally different all-in-one simplified adhesives. Conversely, these crystals were entirely absent from the hybrid layer of the etch-and-rinse NTD adhesive. In the X5D group, a bright band was noted beneath the hybrid layer. The methacryloxydecyl dihydrogen phosphate monomer containing ultramild self-etch adhesive (SUD) was still validated in terms of its capability in dentin adhesion.

High prevalence of vitamin D deficiency among healthy Saudi Arabian men: relationship to bone mineral density, parathyroid hormone, bone turnover markers, and lifestyle factors.

SUMMARY: In this cross-sectional study, the prevalence of vitamin D deficiency [serum 25-hydroxyvitamin D (25(OH)D) <50 nmol/L] was 87.8% among Saudi Arabian men. There was a linear inverse relationship between serum 25(OH)D and intact parathyroid hormone (PTH) levels, but without a threshold of 25(OH)D at which intact PTH values plateaued. INTRODUCTION: Vitamin D insufficiency and/or deficiency has now reached epidemic proportions and has been linked to low bone mineral density (BMD), some lifestyle factors, and obesity in adults. This relationship is not well documented in Saudi Arabian men. This study examines the relationship between vitamin D status, intact parathyroid hormone (intact PTH), and lifestyle factors among Saudi Arabian men. METHODS: This cross-sectional study involved 834 men aged 20-74 years living in Jeddah area who were randomly selected and medically examined. Men had their BMD (lumbar spine (L1-L4) and neck femur), 25(OH)D, intact PTH, and other parameters measured according to detailed inclusion criteria. RESULTS: Deficiency (25(OH)D<50 nmol/L) and insufficiency (≥50-75 nmol/L) were present in 87.8% and 9.7%, respectively. Deficiency was common among older and obese men with no education and sedentary lifestyle sampled during summer and spring. Serum 25(OH)D showed an inverse linear relationship with intact PTH, but there was no threshold of serum 25(OH)D at which PTH levels plateaued. There was a positive correlation between BMD values at both lumbar spine (L1-L4) (P < 0.023) and neck femur (P < 0.036) and serum 25(OH)D levels, respectively. CONCLUSIONS: Functionally significant vitamin D deficiency affects BMD and bone turnover markers among Saudi Arabian men and is largely attributed to older age, obesity, sedentary lifestyle, no education, poor exposure to sunlight, smoking, and poor dietary vitamin D supplementation. The data suggest that an increase in PTH cannot be used as a marker for vitamin D deficiency.

Decreased serum sclerostin levels in patients with primary hyperparathyroidism: a cross-sectional and a longitudinal study.

UNLABELLED: Decreased serum sclerostin was evident in patients with primary hyperparathyroidism and was inversely related to parathyroid hormone (PTH). Sclerostin normalized earlier than biochemical bone turnover markers (BTMs) following parathyroidectomy. INTRODUCTION: There is limited information on the changes of serum sclerostin in conditions with chronic PTH excess in humans. The main objectives of the present study were to: (1) examine cross-sectionally the changes of serum sclerostin levels in patients with primary hyperparathyroidism (PHPT), (2) study the time course changes in serum sclerostin in PHPT patients following parathyroidectomy (PTX) followed up longitudinally for 12 months, and (3) compare the changes in serum sclerostin to that of BTMs. METHODS: We studied 60 PHPT patients and compared them with 74 PTX patients together with 268 age- and sex-matched healthy controls. Also, we followed 27 PTX patients longitudinally at 2, 4, 6, 10, 30, 60, 180, and 360 days postoperatively. Serum sclerostin, BTMs, and minerals were measured. Also, bone mineral density was determined by dual energy X-ray absorptiometry. RESULTS: Patients with PHPT exhibited significantly lower mean serum sclerostin [mean, in picomoles per liter; 95% confidence interval (CI)] (28.98; 27.94-30.03) than that obtained for PTX patients (37.01; 35.75-38.27) and healthy controls (46.22; 45.13-47.31) (P < 0.0001, for each case), respectively. Serum PTH inversely correlated with serum sclerostin (r = -0.651, P < 0.0001). Serum sclerostin was normalized in PTX patients by the tenth day postoperatively and remained within the expected reference range thereafter. CONCLUSIONS: Significantly decreased serum sclerostin was evidenced in PHPT patients as compared with PTX and euparathyroid controls. The inverse PTH and sclerostin relationship suggests that sclerostin is downregulated by PTH in humans. Serum sclerostin normalized earlier than BTMs following parathyroidectomy.

Torsion of the greater omentum.

Full text is available as a scanned copy of the original print version.