Smartphone-enabled field monitoring tool for rapid hexavalent chromium detection in water.

Chromium contamination of soil and water is a serious environmental and public health concern as the hexavalent form of chromium [Cr(VI)] is readily soluble in water and is a confirmed carcinogen. There is an imminent need for a robust, low-cost, and simple analytical technique to facilitate in situ monitoring of Cr(VI) in water. Current quantitative methods of Cr(VI) detection are largely laboratory-based, time-consuming, expensive, and require training for implementation. In this contribution, a portable, easy-to-use, and compact measuring tool is presented that provides Cr(VI) concentration within 10 min of water sampling over a linear range of 0-3 mg L-1. This tool utilizes a relatively inexpensive camera-enabled smartphone with a custom-made test chamber attachment to seamlessly perform Cr(VI) measurements on water samples in the field. For analysis, an android-based software application was developed that directs the user to perform a simple series of steps following the diphenylcarbazide-based colorimetric method prescribed by the American Public Health Association. The tool was validated against a standard UV-visible spectrophotometer for a variety of synthetic and naturally contaminated water samples, with correlation factors greater than 0.993 (p < .001). The colorimetric method was also validated against a non-colorimetric Cr(VI) detection technique-ion chromatography-inductively coupled plasma mass spectrometry. Furthermore, Cr(VI) detection limits for the smartphone-enabled colorimetric method were found to be within 1.3-11.6 µg L-1, which were significantly better than reported for commercially available field test kits, and even surpassed the limits exhibited by a typical spectrophotometer (25-50 µg L-1). Finally, real-time mapping of source waters at a contaminated site was demonstrated by remote logging of Cr(VI) water quality data and corresponding GPS coordinates into a cloud server. This study highlights the potential role of smartphone-based monitoring tool in providing information to the affected community and enabling safe access to drinking water. An accurate, robust, simple-to-use, and economic method to measure hexavalent chromium in water within 10 min of sampling at site.

A compact point-of-use water purification cartridge for household use in developing countries.

Simple, low-cost household interventions are known to be effective in lowering the incidence of waterborne diseases in developing countries. However, high costs along with operational and maintenance issues have prevented the successful adoption of these interventions among the affected communities. To address these limitations, a cost-effective, gravity-driven water purification cartridge has been developed by employing the synergistic disinfection action of low concentrations of silver and chlorine on bacteria and viruses. The silver and chlorine treatment components within the cartridge have been developed using inexpensive materials and integrated with a life indicator and auto-shut-off-mechanism within a compact form factor. The antibacterial as well as antiviral performance of the cartridge was tested by using ground water spiked with Escherichia coli and MS2 bacteriophage. The results show that, although individually, the silver and chlorine treatment systems were unable to inactivate the test strains, the integrated cartridge inactivates both bacteria as well as viruses up to the log reduction requirement of the USEPA guide standard for microbiological water purifiers over its designated life of 2,000 liters.

Comparative study of disinfectants for use in low-cost gravity driven household water purifiers.

Point-of-use (POU) gravity-driven household water purifiers have been proven to be a simple, low-cost and effective intervention for reducing the impact of waterborne diseases in developing countries. The goal of this study was to compare commonly used water disinfectants for their feasibility of adoption in low-cost POU water purifiers. The potency of each candidate disinfectant was evaluated by conducting a batch disinfection study for estimating the concentration of disinfectant needed to inactivate a given concentration of the bacterial strain Escherichia coli ATCC 11229. Based on the concentration of disinfectant required, the size, weight and cost of a model purifier employing that disinfectant were estimated. Model purifiers based on different disinfectants were compared and disinfectants which resulted in the most safe, compact and inexpensive purifiers were identified. Purifiers based on bromine, tincture iodine, calcium hypochlorite and sodium dichloroisocyanurate were found to be most efficient, cost effective and compact with replacement parts costing US$3.60-6.00 for every 3,000 L of water purified and are thus expected to present the most attractive value proposition to end users.