Harnessing Plasticity in an Amine-Borane as a Piezoelectric and Pyroelectric Flexible Film.

We demonstrate that trimethylamine borane can exhibit desirable piezoelectric and pyroelectric properties. The material was shown to be able operate as a flexible film for both thermal sensing, thermal energy conversion and mechanical sensing with high open circuit voltages (>10 V). A piezoelectric coefficient of d33 ≈10-16 pC N-1 , and pyroelectric coefficient of p≈25.8 µC m-2 K-1 were achieved after poling, with high pyroelectric figure of merits for sensing and harvesting, along with a relative permittivity of ϵ 33 σ ≈ 6.3.

Enhanced pyroelectric and piezoelectric properties of PZT with aligned porosity for energy harvesting applications.

This paper demonstrates the significant benefits of exploiting highly aligned porosity in piezoelectric and pyroelectric materials for improved energy harvesting performance. Porous lead zirconate (PZT) ceramics with aligned pore channels and varying fractions of porosity were manufactured in a water-based suspension using freeze-casting. The aligned porous PZT ceramics were characterized in detail for both piezoelectric and pyroelectric properties and their energy harvesting performance figures of merit were assessed parallel and perpendicular to the freezing direction. As a result of the introduction of porosity into the ceramic microstructure, high piezoelectric and pyroelectric harvesting figures of merits were achieved for porous freeze-cast PZT compared to dense PZT due to the reduced permittivity and volume specific heat capacity. Experimental results were compared to parallel and series analytical models with good agreement and the PZT with porosity aligned parallel to the freezing direction exhibited the highest piezoelectric and pyroelectric harvesting response; this was a result of the enhanced interconnectivity of the ferroelectric material along the poling direction and reduced fraction of unpoled material that leads to a higher polarization. A complete thermal energy harvesting system, composed of a parallel-aligned PZT harvester element and an AC/DC converter, was successfully demonstrated by charging a storage capacitor. The maximum energy density generated by the 60 vol% porous parallel-connected PZT when subjected to thermal oscillations was 1653 µJ cm-3, which was 374% higher than that of the dense PZT with an energy density of 446 µJ cm-3. The results are beneficial for the design and manufacture of high performance porous pyroelectric and piezoelectric materials in devices for energy harvesting and sensor applications.

Effects of rheological properties on ice-templated porous hydroxyapatite ceramics.

Freeze casting of aqueous suspension was investigated as a method for fabricating hydroxyapatite (HA) porous ceramics with lamellar structures. The rheological properties of HA suspensions employed in the ice-templated process were investigated systematically. Well aligned lamellar pores and dense ceramic walls were obtained successfully in HA porous ceramics with the porosity of 68-81% and compressive strength of 0.9-2.4 MPa. The results exhibited a strong correlation between the rheological properties of the employed suspensions and the morphology and mechanical properties of ice-templated porous HA ceramics, in terms of lamellar pore characteristics, porosities and compressive strengths. The ability to produce aligned pores and achieve the manipulation of porous HA microstructures by controlling the rheological parameters were demonstrated, revealing the potential of the ice-templated method for the fabrication of HA scaffolds in biomedical applications.