Avaliação longitudinal em pacientes com má oclusão de Classe II Divisão 1 submetidos ao tratamento ortodôntico sem extrações – análise de modelos / Long-term evaluation in Class II Division 1 patients after nonextraction orthodontic treatment – Dental cast analysis

O objetivo deste estudo longitudinal foi avaliar as alterações dentárias pós-tratamento e em longo prazo em pacientes Classe II Divisão 1 de Angle tratados com aparelho extrabucal cervical e aparelho ortodôntico fixo sem extrações dentárias. Os modelos dentários de 33 pacientes foram avaliados no pré-tratamento (T1), pós-tratamento (T2) e pós-contenção (T3). Os pacientes apresentavam em média 10,7 anos em T1, 15,1 anos em T2, e 26,2 anos no T3. As larguras intermolares e intercaninos, comprimento do arco, perímetro do arco, overjet, overbite e irregularidade dos incisivos inferiores foram avaliados nos modelos do arco maxilar e mandibular. Para identificar mudanças estatisticamente significativas em curto prazo (T1-T2) e longo prazo (T2-T3) foi utilizado o teste t de Student. Os resultados mostraram que, durante o tratamento, as larguras do arco maxilar e mandibular foram significativamente aumentadas, tanto nas regiões de molares quanto de caninos, e reduzidas no período pós-contenção. Durante o tratamento apenas o comprimento do arco mandibular reduziu, no entanto, em T3, o perímetro e o comprimento diminuíram em ambos os arcos. Overjet e overbite diminuíram em média 5,5 mm e 2,1 mm, respectivamente, no pós-tratamento e ambos aumentaram (média de 0,5 mm e 0,4 mm) na avaliação pós-contenção. A irregularidade dos incisivos inferiores diminuiu em média de 1,9 mm durante o tratamento e aumentou em média 1,1 mm depois do tratamento. Concluiu-se que a terapia utilizada foi eficaz para a correção da má oclusão de Classe II Divisão 1. Após o período de contenção, mínimas alterações dentárias podem ser esperadas na largura intercanino e intermolar, perímetro e comprimento dos arcos, irregularidade dos incisivos e overjet.

The aim of this longitudinal study was to evaluate the post-treatment and long-term dental changes in Class II Division 1 malocclusion patients treated with cervical headgear in conjunction with full-fixed appliance in nonextraction therapy. Dental casts of 33 patients were evaluated at: pretreatment (T1), post-treatment (T2), and postretention (T3). The mean ages were 10.7 years at T1, 15.1 years at T2, and 26.2 years at T3. Molars and canines transversal widths, arch length, arch perimeter, overjet, overbite and lower incisor irregularity were assessed on maxillary and mandibular dental casts. To identify statistically significant changes in short term (T1-T2) and long-term (T2-T3) was used the Student paired t test. The results showed that, during treatment, maxillary and mandibular widths have increased significantly, at both, molar and canine regions and reduced in postretention period. During treatment only mandibular arch length showed reduction, however at T3 perimeter and length, decreased for maxillary and mandibular arches. Overjet and overbite had a mean decreased, during treatment of 5.5 mm and 2.1 mm, respectively, and both increased (mean of 0.5 mm and 0.4mm) in postretention evaluation. Lower incisor irregularity decreased mean was 1.9 mm during treatment and increased mean of 1.1 mm after. The therapy used was effective for Class II Division 1 malocclusion correction. After the retention period small dental changes can be expected in intercanine and intermolar width, arch perimeter and length, incisor irregularity and overjet.

Transverse effects on the nasomaxillary complex one year after rapid maxillary expansion as the only intervention: A controlled study

The aim of this study was to assess by means of cone-beam computed tomography (CBCT) scans the transverse effects on the nasomaxillary complex in patients submitted to rapid maxillary expansion (RME) using Haas expander in comparison to untreated individuals. This prospective controlled clinical study assessed 30 subjects (18 boys and 12 girls) with mixed dentition and during pubertal growth. The treated group was submitted to RME with Haas expander, retention for six months and a six-month follow-up after removal. The control group matched the treated group in terms of age and sex distribution. CBCT scans were taken at treatment onset and one year after the expander was activated. Maxillary first molars (U6) width, right and left U6 angulation, maxillary alveolar width, maxillary basal width, palatal alveolar width, palatal base width, right and left alveolar angulation, palatal area, nasal base width, nasal cavity width and inferior nasal cavity area on the posterior, middle and anterior coronal slices were measured with Dolphin Imaging Software(r) 11.5, except for the first two variables which were performed only on the posterior slice. All transverse dimensions increased significantly (P < 0.05) in the treated group in comparison to the control, except for alveolar angulation and inferior nasal cavity area (P > 0.05). Results suggest that increase of molar, maxillary, palatal and nasal transverse dimensions was stable in comparison to the control group one year after treatment with RME.

OBJETIVO: avaliar, por meio de tomografias computadorizada de feixe cônico (TCFC), as dimensões transversais do complexo nasomaxilar de pacientes submetidos à expansão rápida da maxila (ERM) e sem intervenção. MÉTODOS: este estudo clínico prospectivo e controlado avaliou 30 indivíduos (18 meninos e 12 meninas) durante o período de crescimento puberal e dentição mista. O grupo tratado foi submetido à ERM com expansor de Haas, permanecendo 6 meses em contenção e sendo acompanhados por mais 6 meses após a remoção. O grupo controle foi acompanhado durante o mesmo tempo. Foram realizadas TCFC ao início e um ano após a fase ativa. Com o programa Dolphin Imaging 11.5, a largura entre os primeiros molares superiores (U6), angulação dos U6 direito e esquerdo, largura maxilar alveolar, largura maxilar basal, largura alveolar do palato, largura basal do palato, angulação alveolar direita e esquerda, área palatina, largura da base nasal, largura da cavidade nasal e área da cavidade nasal inferior foram obtidas em cortes coronais posterior, médio e anterior, com exceção das duas primeiras medidas, que foram obtidas apenas no corte coronal posterior. RESULTADOS: todas as medidas foram significativamente (p < 0,05) maiores no grupo da ERM, com exceção da angulação alveolar e da área da cavidade nasal, as quais não foram significativas (p > 0,05) entre os grupos. Os resultados sugerem que, um ano após a ERM, a dimensão transversal na cavidade nasal, maxila, palato e região dos molares são maiores do que em indivíduos não tratados. O protocolo de ERM utilizado foi eficaz na manutenção da dimensão transversal durante período de acompanhamento. .

Changes in skeletal and dental relationship in Class II Division I malocclusion after rapid maxillary expansion: a prospective study.

OBJECTIVE: To assess skeletal and dental changes immediately after rapid maxillary expansion (RME) in Class II Division 1 malocclusion patients and after a retention period, using cone beam computed tomography (CBCT) imaging. METHODS: Seventeen children with Class II, Division 1 malocclusion and maxillary skeletal transverse deficiency underwent RME following the Haas protocol. CBCT were taken before treatment (T1), at the end of the active expansion phase (T2) and after a retention period of 6 months (T3). The scanned images were measured anteroposteriorly (SNA, SNB, ANB, overjet and MR) and vertically (N-ANS, ANS-Me, N-Me and overbite). RESULTS: Significant differences were identified immediately after RME as the maxilla moved forward, the mandible moved downward, overjet increased and overbite decreased. During the retention period, the maxilla relapsed backwards and the mandible was displaced forward, leaving patients with an overall increase in anterior facial height. CONCLUSION: RME treatment allowed more anterior than inferior positioning of the mandible during the retention period, thus significantly improving Class II dental relationship in 75% of the patients evaluated.

Reliability of CBCT in the diagnosis of dental asymmetry.

OBJECTIVE: The aim of this study was to validate a method used to assess dental asymmetry, in relation to the skeletal midline, by means of CBCT. METHODS: Ten patients who had CBCT scans taken were randomly selected for this study. Five different observers repeated 10 landmarks (x, y and z variables for each) and 12 linear measurements within 10 days. Measurements were taken in both arches to evaluate symmetry of first molars, canines and dental midline in relation to the skeletal midline. Intraclass correlation coefficient (ICC) was carried out to assess intra- and interobserver reliability for landmarks and distances. Average mean difference was also assessed to check measurement errors between observers. RESULTS: ICC for the landmarks was, respectively, ≥ 0.9 for 27 (90%) and 25 (83%) variables for intra- and interobserver; ICC for distances was ≥ 0.9 for 7 (58%) and 5 (42%), respectively. All ICC landmarks for distances were >0.75 for both intra- and interobserver. The mean difference between observers was ≤ 0.6 mm for all the distances. CONCLUSION: The method used to assess dental asymmetry by means of CBCT is valid. Measurements of molars, canines and dental midline symmetry with the skeletal midline are reproducible and reliable when taken by means of CBCT and by different operators.

Changes in skeletal and dental relationship in Class II Division I malocclusion after rapid maxillary expansion: a prospective study

OBJECTIVE: To assess skeletal and dental changes immediately after rapid maxillary expansion (RME) in Class II Division 1 malocclusion patients and after a retention period, using cone beam computed tomography (CBCT) imaging. METHODS: Seventeen children with Class II, Division 1 malocclusion and maxillary skeletal transverse deficiency underwent RME following the Haas protocol. CBCT were taken before treatment (T1), at the end of the active expansion phase (T2) and after a retention period of 6 months (T3). The scanned images were measured anteroposteriorly (SNA, SNB, ANB, overjet and MR) and vertically (N-ANS, ANS-Me, N-Me and overbite). RESULTS: Significant differences were identified immediately after RME as the maxilla moved forward, the mandible moved downward, overjet increased and overbite decreased. During the retention period, the maxilla relapsed backwards and the mandible was displaced forward, leaving patients with an overall increase in anterior facial height. CONCLUSION: RME treatment allowed more anterior than inferior positioning of the mandible during the retention period, thus significantly improving Class II dental relationship in 75% of the patients evaluated. .

OBJETIVO: avaliar, por meio de imagens de tomografia computadorizada de feixe cônico (TCFC), as mudanças esqueléticas e dentárias, imediatas e após 6 meses de contenção, causadas pela expansão rápida da maxila (ERM) em pacientes com má oclusão de Classe II, divisão 1. MÉTODOS: dezessete crianças com má oclusão de Classe II, divisão 1, e deficiência transversal da maxila, foram submetidas a ERM, de acordo com o protocolo proposto por Haas. TCFC foram realizadas antes da ERM (T1), imediatamente após a fase ativa (T2) e após 6 meses de contenção (T3). Alterações anteroposteriores (SNA, SNB, ANB, overjet e RM) e verticais (N-ANS, ANS-Me, N-Me e overbite) foram analisadas. RESULTADOS: imediatamente após a ERM, enquanto a maxila se deslocou para frente, a mandíbula se movimentou para frente e para baixo, aumentando o overjet e diminuindo o overbite. Durante o período de contenção, a maxila retornou para posterior e a mandíbula deslocou em direção anterior, aumentando a altura facial anterior. CONCLUSÃO: a realização da ERM permitiu que a mandíbula se posicionasse mais anteriormente do que inferior durante o período de contenção, melhorando a relação molar de Classe II em 75% dos pacientes avaliados. .

Reliability of CBCT in the diagnosis of dental asymmetry

Objective: The aim of this study was to validate a method used to assess dental asymmetry, in relation to the skeletal midline, by means of CBCT. Methods: Ten patients who had CBCT scans taken were randomly selected for this study. Five different observers repeated 10 landmarks (x, y and z variables for each) and 12 linear measurements within 10 days. Measurements were taken in both arches to evaluate symmetry of first molars, canines and dental midline in relation to the skeletal midline. Intraclass correlation coefficient (ICC) was carried out to assess intra- and interobserver reliability for landmarks and distances. Average mean difference was also assessed to check measurement errors between observers. Results: ICC landmarks was ≥ 0.9 for 27 (90%) and 25 (83%) variables for intra- and interobserver, respectively. ICC for distances was ≥ 0.9 for 7 (58%) and 5 (42%), respectively. All ICC landmarks for distances were >0.75 for both intra- and interobserver. The mean difference between observers was ≤ 0.6 mm for all the distances. Conclusion: The method used to assess dental asymmetry by means of CBCT is valid. Measurements of molars, canines and dental midline symmetry with the skeletal midline are reproducible and reliable when taken by means of CBCT and by different operators. .

Objetivo: validar um método para avaliar assimetria dentária, em relação à linha média esquelética, usando TCFC. Métodos: dez pacientes que realizaram TCFC foram selecionados aleatoriamente para esse estudo. Cinco diferentes observadores repetiram 10 pontos de referência (com variáveis x, y e z, para cada ponto) e 12 medidas lineares em um intervalo de 10 dias. As medições foram realizadas em ambas as arcadas, para avaliar a simetria de primeiros molares, caninos e linha média dentária, em relação à linha média esquelética. Índice de correlação intraclasse (ICC) foi realizado para verificar a confiabilidade intraobservador e interobservadores para os pontos de referência e distâncias. A diferença média também foi avaliada, para checar os erros de mensuração entre os observadores. Resultados: ICC para os pontos de referência foram ≥ 0,9 para 27 (90%) e 25 (83%) das variáveis para intra- e interobservadores respectivamente. ICC para distâncias foi ≥ 0,9 para 7 (58%) e 5 (42%), respectivamente. Todas as medidas de ICC para distâncias foram > 0,75 para intraobservador e interobservadores. A diferença média entre observadores foi ≤ 0,6mm para todas as distâncias. Conclusão: o método de verificação de assimetria dentária utilizando TCFC é válido. Medições de molares, caninos e linha média dentária com a linha média esquelética são reproduzíveis e confiáveis quando feitas utilizando TCFC, mesmo que por diferentes operadores. .

Transverse effects on the nasomaxillary complex one year after rapid maxillary expansion as the only intervention: a controlled study.

The aim of this study was to assess by means of cone-beam computed tomography (CBCT) scans the transverse effects on the nasomaxillary complex in patients submitted to rapid maxillary expansion (RME) using Haas expander in comparison to untreated individuals. This prospective controlled clinical study assessed 30 subjects (18 boys and 12 girls) with mixed dentition and during pubertal growth. The treated group was submitted to RME with Haas expander, retention for six months and a six-month follow-up after removal. The control group matched the treated group in terms of age and sex distribution. CBCT scans were taken at treatment onset and one year after the expander was activated. Maxillary first molars (U6) width, right and left U6 angulation, maxillary alveolar width, maxillary basal width, palatal alveolar width, palatal base width, right and left alveolar angulation, palatal area, nasal base width, nasal cavity width and inferior nasal cavity area on the posterior, middle and anterior coronal slices were measured with Dolphin Imaging Software(r) 11.5, except for the first two variables which were performed only on the posterior slice. All transverse dimensions increased significantly (P < 0.05) in the treated group in comparison to the control, except for alveolar angulation and inferior nasal cavity area (P > 0.05). Results suggest that increase of molar, maxillary, palatal and nasal transverse dimensions was stable in comparison to the control group one year after treatment with RME.

Changes of pulp-chamber dimensions 1 year after rapid maxillary expansion.

INTRODUCTION: The purpose of this study was to examine the effect of orthopedic forces on maxillary first molars' and maxillary central incisors' pulp chambers in children having rapid maxillary expansion as the only intervention compared with children having no orthodontic intervention by using cone-beam computed tomography images. METHODS: In this prospective controlled clinical study, we evaluated 60 maxillary first molars and 60 maxillary central incisors from 30 children (18 boys, 12 girls) in the mixed dentition and during the pubertal growth period. The treated group had rapid maxillary expansion with the Haas expander, followed by 6 months of retention and 6 months of follow-up out of retention; the control group had no intervention during the study. Cone-beam computed tomography scans were taken initially and 1 year after the rapid maxillary expansion active phase. Initially, a 3-dimensional scrolling in all pulp chambers of the evaluated teeth was performed with Dolphin Imaging software (version 11.0; Dolphin Imaging & Management Solutions, Chatsworth, Calif) to describe the incidence of pulp-chamber calcifications. The dimensions of the pulp chambers of the molars and incisors were also investigated. Cross-sectional and longitudinal slices were used for each molar (coronal and axial slices) and incisor (sagittal and axial slices). The area (mm(2)) was obtained from 3 slices of each kind (6 measurements for each tooth). RESULTS: The results suggest that rapid maxillary expansion did not induce new pulp-chamber calcification. Also, it did not interfere in normal pulp-chamber dimension changes of the anchorage molars. CONCLUSIONS: The pulp chamber of the central incisors can be expected to be minimally wider 1 year after the therapy.

Root repair after contact with mini-implants: systematic review of the literature.

This systematic review identified and qualified the current evidence of dental root damage and repair after contact with mini-implants. The electronic databases Cochrane library, Ovid, Scirus, Scopus, and Virtual Health Library were used to search original articles from 1980 to December 2011. The inclusion criteria to select the articles were 1. randomized controlled trials and prospective clinical studies based on trials involving humans, 2. randomized controlled studies in animals, 3. use of mini-implants with a diameter less than 2.5 mm, and 4. root contact evaluation associated with the use of orthodontic mini-implants. Two authors independently reviewed and extracted data from the selected studies and a methodological quality assessment process was used to rank the studies classifying them as low moderate or high quality. The searches retrieved 579 citations. After initial selection, 17 studies were considered eligible and their full texts were assessed. Four of those were excluded because root damage was not evaluated and two were excluded because of overlapping samples. Eleven articles, nine in animals and two in humans, fulfilled the inclusion criteria. From these, two studies were ranked as presenting high methodological quality, eight were judged to be of moderate, and one of low quality. The evidence found suggested that the quality of root repair depends on the amount of damage caused by the mini-implant. When the damage is limited to the cementum or dentin, healing and almost complete and repair of the periodontal structure can occur. Mini-implants that injured the pulp were less likely to result in complete repair of the periodontal tissues.

In situ evaluation of orthodontic elastomeric chains.

The hypothesis tested in this study was that intraoral exposure of elastomeric chains alters their tensile strength. For such purpose, it was evaluated the in situ behavior of different elastomeric chains stretched for 3 weeks. Three kinds of elastomeric chains, Plastic chain (PC), Memory chain (MC) and Super slick chain (SSC), were randomly placed in 3 quadrants of 13 patient in a fixed distance of 16 mm and mean initial force of 180 g. Tensile testing was performed in an universal testing machine at different intervals: initial, 1 h, 24 h, 1 week, 2 weeks and 3 weeks. A two-way ANOVA test was performed to identify the influence of both material and time on the force decrease. A subsequent one-way ANOVAtest with the Tukey's post hoc test was used to identify statistically significant intragroup and intergroup remaining force (g and %) differences at 5% significance level. The effect of both the material and the time factors were significant. All groups showed significant force decrease after the 1-h period (23% for PC and 14% for MC and SSC). At the end of the 3-week period, the remaining force was 57% (96 g), 67% (129 g) and 71% (125 g) for PC, MC and SSC, respectively. In conclusion, intraoral exposure of elastomeric chains altered their tensile strength. In general, the greater force decrease occurred within the first hour. The remaining force of the enhanced chains measured at each time interval was greater than the conventional one (PC). After 3 weeks, only the enhanced chains maintained the force applied over 100 g.

Angle Class III malocclusion treated with mandibular first molar extractions.

A Class III malocclusion associated with dental asymmetry is a complex diagnostic and treatment problem in orthodontics. The goals of maintaining or improving the facial profile and achieving good function are decisive factors when considering whether to plan a surgical or a nonsurgical treatment approach. A fixed appliance in combination with extractions could be considered for nonsurgical management of this type of malocclusion in the permanent dentition. This article presents the results of an orthodontic approach to a Class III subdivision malocclusion in an adult treated with mandibular first molar extractions. The extractions provided the space needed to correct the overjet and overbite and to improve the intercuspation.

Evaluation of the lower incisor inclination during alignment and leveling using superelastic NiTi archwires: a laboratory study

OBJECTIVE: The aim of this laboratory study is to evaluate the influence of the shape and the length limitation of superelastic nickel-titanium (NiTi) archwires on lower incisors inclination during alignment and leveling. METHODS: Metal teeth mounted on a typodont articulator device were used to simulate a malocclusion of the mandibular arch (-3.5 mm model discrepancy). Three different shapes (Standard, Accuform and Ideal) of superelastic NiTi archwires (Sentalloy, GAC, USA) were tested. Specimens were divided in two groups: Group I, with no limitation of the archwire length; and Group II, with distal limitation. Each group had thirty specimens divided into three subgroups differentiated by the archwire shape. All groups used round wires with diameters of 0.014-in, 0.016-in, 0.018-in and 0.020-in. The recording of all intervals was accomplished using standardized digital photographs with orthogonal norm in relation to median sagittal plane. The buccolingual inclination of the incisor was registered using photographs and software CorelDraw. RESULTS: The results were obtained using ANOVA and Tukey's test at a significant level of 5%. The inclination of the lower incisor increased in both groups and subgroups. The shape of the archwire had statistically significant influence only in Group I - Standard (11.76º), Ideal (5.88º) and Accuform (1.93º). Analyzing the influence of the length limitation, despite the mean incisor tipping in Group II (3.91º) had been smaller than Group I (6.52º), no statistically significant difference was found, except for Standard, 3.89º with limitation and 11.76º without limitation. The greatest incisor tipping occurred with the 0.014-in archwires.

Is the airway volume being correctly analyzed?

INTRODUCTION: The aim of the study was to determine the most accurate threshold value for airway volume quantification based on specific experimental conditions. METHODS: Ten scans from the airway prototype were obtained by using cone-beam computed tomography. The volume from each scan was measured with 8 values (25, 50, 70, 71, 72, 73, 74, and 75) of the threshold tool from the Dolphin software (Dolphin Imaging and Management Solutions, Chatsworth, Calif). The gold standard method used was the actual volume of the airway prototype, which was compared with the different threshold values. An intraclass correlation coefficient test was applied to evaluate the intraexaminer calibration and verify differences among the airway volumes measured in all cone-beam computed tomography scans. Analysis of variance with the Tukey post-hoc test was used to compare differences among the measurements with different threshold values with the gold standard. RESULTS: The intraexaminer reliability was confirmed by the intraclass correlation coefficient, which was ≥0.99. The intraclass correlation coefficient used to verify the differences among the airway volume measurements in all cone-beam computed tomography scans was ≥0.98, showing that they were comparable. Analysis of variance and the Tukey post-hoc test showed that the volumes measured with the threshold values of the 25 and 50 filters had statistically significant differences from the gold standard. However, volumes measured with the threshold values of the 70, 71, 72, 73, 74, and 75 showed no statistically significant differences from the gold standard and among them. CONCLUSIONS: In our study for the cone-beam machine and the acquisition parameters used, the threshold value of the 73 used in Dolphin 3D software was the most accurate to measure airway volume, but the threshold values of the 70, 71, 72, 74, and 75 had no statistically significant differences compared with the gold standard, showing they are also reliable.

Palato: o que saber previamente à instalação de mini-implantes? / Palate: What to know before mini-implant' s placement?

A região do palato é um dos locais mais favoráveis para a instalação de mini-implantes. Fatores como fácil acessibilidade, cobertura total de gengiva queratinizada e boa qualidade óssea em sítios específicos contribuem para a redução do risco de inflamação e aumento da estabilidade primária. No entanto, a presença de vasos, nervos e forames demanda grande atenção no momento da instalação desses dispositivos. Lesões nestas estruturas podem levar ao comprometimento da técnica e do tratamento. Descrições pormenorizadas da região palatina são escassas na literatura, até mesmo em livros de anatomia. Buscando preencher essa lacuna, o presente trabalho descreve detalhadamente a região palatina, destacando áreas de maior ou menor espessura óssea, espessura de mucosa, posição e trajeto de nervos, vasos e forames, destacando os locais mais indicados para a instalação desses dispositivos.

Tomographic mapping of the hard palate and overlying mucosa.

The aim of this study was to measure the thickness of the hard palate and its overlying mucosa using cone-beam computed tomography (CBCT), for purposes of miniscrew placement. The sample comprised 36 CBCT scans of patients aged 12 to 52 years from a database of the Orthodontics Department of the Federal University of Rio de Janeiro. Paracoronal views of the palatal region were reconstructed at 4, 8, 16 and 24 mm posterior to the incisive foramen. In each reconstruction measurements were taken at the suture, 3 mm and 6 mm bilaterally to it. Wilcoxon's test verified the differences between the selected regions. Total bone height decreased from the anterior to the posterior region. In cross sections 4, 16 and 24, bone height decreased from the suture laterally to the 3 mm region and then increased in the 6 mm region. The cortical thickness does not seem to be a concern because it presented a mean thickness of at least 1 mm at all sites evaluated. The measurements of the mucosa thickness decreased from lateral to median and from anterior to posterior regions. The most suitable areas for miniscrew placement in the palate are located 4 mm posterior to the incisive foramen, in the median or paramedian regions 3 mm adjacent to the suture.

Tomographic mapping of the hard palate and overlying mucosa

The aim of this study was to measure the thickness of the hard palate and its overlying mucosa using cone-beam computed tomography (CBCT), for purposes of miniscrew placement. The sample comprised 36 CBCT scans of patients aged 12 to 52 years from a database of the Orthodontics Department of the Federal University of Rio de Janeiro. Paracoronal views of the palatal region were reconstructed at 4, 8, 16 and 24 mm posterior to the incisive foramen. In each reconstruction measurements were taken at the suture, 3 mm and 6 mm bilaterally to it. Wilcoxon's test verified the differences between the selected regions. Total bone height decreased from the anterior to the posterior region. In cross sections 4, 16 and 24, bone height decreased from the suture laterally to the 3 mm region and then increased in the 6 mm region. The cortical thickness does not seem to be a concern because it presented a mean thickness of at least 1 mm at all sites evaluated. The measurements of the mucosa thickness decreased from lateral to median and from anterior to posterior regions. The most suitable areas for miniscrew placement in the palate are located 4 mm posterior to the incisive foramen, in the median or paramedian regions 3 mm adjacent to the suture.

In situ evaluation of orthodontic elastomeric chains

The hypothesis tested in this study was that intraoral exposure of elastomeric chains alters their tensile strength. For such purpose, it was evaluated the in situ behavior of different elastomeric chains stretched for 3 weeks. Three kinds of elastomeric chains, Plastic chain (PC), Memory chain (MC) and Super slick chain (SSC), were randomly placed in 3 quadrants of 13 patient in a fixed distance of 16 mm and mean initial force of 180 g. Tensile testing was performed in an universal testing machine at different intervals: initial, 1 h, 24 h, 1 week, 2 weeks and 3 weeks. A two-way ANOVA test was performed to identify the influence of both material and time on the force decrease. A subsequent one-way ANOVAtest with the Tukey's post hoc test was used to identify statistically significant intragroup and intergroup remaining force (g and %) differences at 5% significance level. The effect of both the material and the time factors were significant. All groups showed significant force decrease after the 1-h period (23% for PC and 14% for MC and SSC). At the end of the 3-week period, the remaining force was 57% (96 g), 67% (129 g) and 71% (125 g) for PC, MC and SSC, respectively. In conclusion, intraoral exposure of elastomeric chains altered their tensile strength. In general, the greater force decrease occurred within the first hour. The remaining force of the enhanced chains measured at each time interval was greater than the conventional one (PC). After 3 weeks, only the enhanced chains maintained the force applied over 100 g.

A hipótese testada foi que a exposição dos elásticos em cadeia ao meio bucal altera sua força de tensão. Portanto, o objetivo deste estudo foi avaliar o comportamento, in situ, de diferentes cadeias elastoméricas quando tensionadas durante 3 semanas. Três tipos de elásticos em cadeia Plastic Chain (PC), Memory Chain (MC) e Super Slick Chain (SSC) foram inseridos aleatoriamente em 3 dos quadrantes de 13 pacientes com distância fixa de 16 mm e força inicial de 180 g. Foi realizado ensaio de tração em uma máquina de ensaio universal EMIC nos seguintes intervalos: inicial, 1 h, 24 h, 1 semana, 2 semanas e 3 semanas. O teste ANOVA a dois critérios foi aplicado para verificar a influência do material e do tempo na degradação da força. Subsequentemente, foi utilizado o teste ANOVA a um critério e pós-teste de Tukey para identificar diferenças estatísticas (p<0,05), intra-grupo e inter-grupo, na força remanescente (g e %). Tanto o material quanto o tempo tiveram efeito significativo na degradação da força. Todos os grupos mostraram diminuição significativa da força depois de 1 h sob tensão (23% para o PC e 14% para o MC e SSC). Ao final do período de 3 semanas, a força remanescente foi de 57% (96 g), 67% (129 g) e 71% (125 g) para o PC, MC e SSC, respectivamente. A exposição dos elásticos em cadeia ao meio bucal alterou a força de tensão. No geral, a maior diminuição da força ocorreu na primeira hora. A força remanescente testada em cada intervalo foi maior para os elásticos reforçados (MC e SSC) do que para o elástico convencional (PC). Após 3 semanas, apenas os elásticos reforçados mantiveram a força acima de 100 g.

3D mandibular positioning after rapid maxillary expansion in Class II malocclusion.

This study investigated, using cone beam computed tomography (CBCT), the spatial mandibular positioning after rapid maxillary expansion (RME) in Class II Division 1 malocclusion. This prospective study evaluated 17 children (mean initial age 10.36 years old) presenting Class II, Division 1 malocclusion and skeletal maxillary constriction that underwent to RME Haas' protocol. CBCT was performed before treatment (T1), immediately after the stabilization of expander screw (T2) and after the retention period of 6 months (T3). The scans were managed in Dolphin Imaging® 11.0 software, where landmarks (right and left condylion, right and left gonion, and menton) were positioned and measured in relation to sagittal, coronal and axial plane to verify, respectively, transverse, anteroposterior and vertical displacement of the mandible. Paired Student's t-test was used to identify significant differences (p<0.05) between T1 and T2, T2 and T3, and T1 and T3. After RME, right and left gonion moved downward (1.11 mm and 0.89 mm) and menton displaced downward (1.90 mm) and backward (1.50 mm). During the retention period, only anteroposterior displacement was significant, with the right and left gonion (0.97 mm and 1.26 mm) and the menton (2.29 mm) moving forward. Three-dimensional assessment of the mandible in Class II Division 1 patients subjected to RME showed a transitory backward and downward mandibular positioning, without any lateral displacement. The 6-month retention period allowed the mandible shifting significantly forward, exhibiting a more anterior position compared with the initial condition, even remaining in a more downward direction.

Does rapid maxillary expansion have long-term effects on airway dimensions and breathing?

INTRODUCTION: In this systematic review, we identified and qualified the evidence of long-term reports on the effects of rapid maxillary expansion (RME) on airway dimensions and functions. METHODS: Electronic databases (Ovid, Scirus, Scopus, Virtual Health Library, and Cochrane Library) were searched from 1900 to September 2010. Clinical trials that assessed airway changes at least 6 months after RME in growing children with rhinomanometry, acoustic rhinometry, computed tomography, or posteroanterior and lateral radiographs were selected. Studies that used surgically assisted RME and evaluated other simultaneous treatments during expansion, systemically compromised subjects, or cleft patients were excluded. A methodologic-quality scoring process was used to identify which studies would be most valuable. RESULTS: Fifteen articles fulfilled the inclusion criteria, and full texts were assessed. Three were excluded, and 12 were assessed for eligibility. Four articles with low methodologic quality were not considered. The remaining 8 were qualified as moderate. The posteroanterior radiographs showed that nasal cavity width increases; in the lateral radiographs, decreased craniocervical angulation was associated with increases of posterior nasal space. Cone-beam computed tomography did not show significant increases of nasal cavity volume. Rhinomanometry showed reduction of nasal airway resistance and increase of total nasal flow, and acoustic rhinometry detected increases of minimal cross-sectional area and nasal cavity volume. CONCLUSIONS: There is moderate evidence that changes after RME in growing children improve the conditions for nasal breathing and the results can be expected to be stable for at least 11 months after therapy.