Predicting oil content in ripe Macaw fruits (Acrocomia aculeata) from unripe ones by near infrared spectroscopy and PLS regression.

A method for early quantification of unripe macaw fruits oil content using near-infrared spectroscopy (NIR) and partial least squares (PLS) is presented. After harvest, the fruit takes about 30 days to reach its maximum oil accumulation. The oil content was quantified thirty days after harvest using Soxhlet extraction. PLS models were built using NIR spectra of shell obtained five days after harvest (Shell5). The Shell5 model was compared with models built using NIR spectra of the shell (Shell30) and mesocarp thirty days after harvest (Pulp30). Ordered predictors selection was used to select the most informative variables. The best models presented root mean square error of prediction and correlation coefficient of prediction of 4.87% and 0.89 for Shell5; 5.83% and 0.85 for Shell30; 4.76% and 0.92 for Pulp30. Thus, the anticipated prediction of oil content could reduce the time and costs of macaw palm quality control and storage.

Early prediction of sugarcane genotypes susceptible and resistant to Diatraea saccharalis using spectroscopies and classification techniques.

The aim of this work was to use spectroscopic methods and partial least squares discriminant analysis (PLS-DA) for the early prediction of genotype resistance or susceptibility to sugarcane borer. The sugarcane leaf +1 was directly analyzed with no sample preparation by ultraviolet-visible-near-infrared (UV-VIS-NIR), middle-infrared (MID), and near-infrared (NIR) spectroscopies. Also, laser-induced breakdown spectroscopy (LIBS) was used to analyze pellets of dried and ground leaves and stalks of sugarcane. Classification models were built using PLS-DA. The models built using UV-VIS-NIR, MID or NIR spectra exhibited ideal sensitivity, specificity, and classification errors, i.e., 1 for both sensitivity and specificity and 0 for classification errors. Regarding the models built using LIBS spectra, those using spectra of pellets made from dried and ground leaves also presented ideal sensitivity, specificity, and classification errors; on the other hand, models built using the spectra of pellets made of dried and ground stalks did not present ideal values for these parameters. Thus, the models built, except for the one using LIBS of pellets made of stalks, showed excellent predictive capacity, making them suitable for predicting the resistance or susceptibility of sugarcane genotypes in the early stages of a plant's life.

Impact of protein blocking on enzymatic saccharification of bagasse from sugarcane clones.

Lignin plays an important functional and structural role in plants, but also contributes to the recalcitrance of lignocellulosic biomass to hydrolysis. This study addresses the influence of lignin in hydrolysis of sugarcane bagasse from conventional bred lines (UFV260 and UFV204) that were selected from 432 field-grown clones. In addition to higher sugar production, bagasse clone UFV204 had a small, but statistically significant, lower insoluble lignin content compared with clone UFV260 (15.5% vs, 16.6%) and also exhibited a significantly higher cellulose conversion to glucose (81.3% vs. 63.3%) at a cellulase loading of 5 (filter paper unit) FPU/g of glucan or 3 FPU/g total solids for liquid hot water pretreated bagasse (200°C, 10 min). The enzyme loading was further decreased by 50% to 2.5 FPU/g glucan and resulted in a similar glucan conversion (88.5%) for clone UFV204 when the bagasse was preincubated with bovine serum albumin at pH 4.8 and nonproductive binding of cellulase components was blocked. Comparison of Langmuir adsorption isotherms and differential adsorption of the three major cellulolytic enzyme components endoglucanase, cellobiohydrolase, and ß-glucosidase help to explain differences due to lignin content.

Prediction of Lignin Content in Different Parts of Sugarcane Using Near-Infrared Spectroscopy (NIR), Ordered Predictors Selection (OPS), and Partial Least Squares (PLS).

The building of multivariate calibration models using near-infrared spectroscopy (NIR) and partial least squares (PLS) to estimate the lignin content in different parts of sugarcane genotypes is presented. Laboratory analyses were performed to determine the lignin content using the Klason method. The independent variables were obtained from different materials: dry bagasse, bagasse-with-juice, leaf, and stalk. The NIR spectra in the range of 10 000-4000 cm-1 were obtained directly for each material. The models were built using PLS regression, and different algorithms for variable selection were tested and compared: iPLS, biPLS, genetic algorithm (GA), and the ordered predictors selection method (OPS). The best models were obtained by feature selection with the OPS algorithm. The values of the root mean square error prediction (RMSEP), correlation of prediction ( RP), and ratio of performance to deviation (RPD) were, respectively, for dry bagasse equal to 0.85, 0.97, and 2.87; for bagasse-with-juice equal to 0.65, 0.94, and 2.77; for leaf equal to 0.58, 0.96, and 2.56; for the middle stalk equal to 0.61, 0.95, and 3.24; and for the top stalk equal to 0.58, 0.96, and 2.34. The OPS algorithm selected fewer variables, with greater predictive capacity. All the models are reliable, with high accuracy for predicting lignin in sugarcane, and significantly reduce the time to perform the analysis, the cost and the chemical reagent consumption, thus optimizing the entire process. In general, the future application of these models will have a positive impact on the biofuels industry, where there is a need for rapid decision-making regarding clone production and genetic breeding program.

Estimation of cellulose crystallinity of sugarcane biomass using near infrared spectroscopy and multivariate analysis methods.

A method for estimation of sugarcane (Saccharum spp.) biomass crystallinity using near infrared spectroscopy (NIR) and partial least squares regression (PLS) as an alternative to the standard method using X-ray diffractometry (XRD) is proposed. Crystallinity was obtained using XRD from sugarcane bagasse. NIR spectra were obtained of the same material. PLS models were built using the NIR and crystallinity values. Cellulose crystallinity ranged from 50 to 81%. Two variable selection algorithms were applied to improve the predictive ability of models, i.e. (a) Ordered Predictors Selection (OPS) and (b) Genetic Algorithm. The best model, obtained with the OPS algorithm, presented values of correlation coefficient of prediction, root mean squared error of prediction and ratio of performance deviation equals to 0.92, 3.01 and 1.71, respectively. A scatter matrix among lignin, α-cellulose, hemicellulose, ash and crystallinity was built that showed that there was no correlation among these properties for the samples studied.