Presence of atypical porcine pestivirus (APPV) in Brazilian pigs.

Recently, a putative new pestivirus species, provisionally named as Atypical Porcine Pestivirus (APPV), was associated with the congenital tremor in piglets in North America and consequently in Europe and Asia. The present research aimed to describe the detection and characterization of APPV employing NS5B gene partial sequencing, gross pathology and histologic examination of piglets displaying congenital tremor from two different farms of Southern Brazil. No gross lesions were observed, and the histological findings revealed moderate vacuolization of the white matter of the cerebellum. RT-PCR followed by DNA sequencing and a phylogenetic analysis confirmed the presence of APPV in samples from the two farms, which the samples were distinct in nature. Phylogenetic reconstruction reinforced the high genetic variability within the APPVs previously reported. This is the first report of APPV in South America suggesting that this new group of viruses may be widespread in swine herds in other countries as it is in Brazil.

Senecavirus A.

Senecavirus A (SVA) is the only member of the genus Senecavirus within the family Picornaviridae. This virus was discovered as a serendipitous finding in 2002 (and named Seneca Valley virus 001 [SVV-001]) while cultivating viral vectors in cell culture and has been proposed for use as an oncolytic virus to treat different types of human neoplasia. SVA was found in lesions in pigs affected by porcine idiopathic vesicular disease in Canada and the USA in 2008 and 2012, respectively. In 2014 and 2015, SVA infection was associated with outbreaks of vesicular disease in sows as well as neonatal pig mortality in Brazil and the USA. Phylogenetic analysis of the SVA VP1 indicates the existence of 3 clades of the virus. Clade I contains the historical strain SVV-001, clade II contains USA SVA strains identified between 1988 and 1997, and clade III contains global SVA strains from Brazil, Canada, China, and the USA identified between 2001 and 2015. The aim of this review is to draw the attention of veterinarians and researchers to a recently described infectious clinical-pathologic condition caused by a previously known agent (SVA). Apart from the intrinsic interest in a novel virus infecting pigs and causing economic losses, the major current concern is the similarity of the clinical picture to that of other swine diseases, because one of them-foot and mouth disease-is a World Organization for Animal Health-listed disease. Because the potential association of SVA with disease is rather new, there are still many questions to be resolved.

Influence of Nd:YAG laser on intrapulpal temperature and bond strength of human dentin under simulated pulpal pressure.

The aim of this study was to evaluate the effects of simulated pulpal pressure (SPP) on the variation of intrapulpal temperature (ΔT) and microtensile bond strength (µTBS) to dentin submitted to an adhesive technique using laser irradiation. One hundred sound human molars were randomly divided into two groups (n = 50), according to the presence or absence of SPP (15 cm H2O). Each group was divided into five subgroups (n = 10) according to Nd:YAG laser energy (60, 80, 100, 120, 140 mJ/pulse). The samples were sequentially treated with the following: 37 % phosphoric acid, adhesive (Scotchbond Universal), irradiation with Nd:YAG laser (60 s), and light curing (10 s). ΔT was evaluated during laser irradiation using a type K thermocouple. Next, a composite resin block was build up onto the irradiated area. After 48 h, samples were submitted to microtensile test (10 kgf load cell, 0.5 mm/min). Data were analyzed by two-way ANOVA and Tukey tests (p = 0.05). ANOVA revealed significant differences for ΔT and TBS in the presence of SPP. For ΔT, the highest mean (14.3 ± 3.23 °C)(A) was observed in 140 mJ and without SPP. For µTBS, the highest mean (33.4 ± 4.15 MPa)(A) was observed in 140 mJ and without SPP. SPP significantly reduced both ΔT and µTBS during adhesive procedures, lower laser energy parameters resulted in smaller ΔT, and the laser parameters did not influence the µTBS values.

Identification and Complete Genome of Seneca Valley Virus in Vesicular Fluid and Sera of Pigs Affected with Idiopathic Vesicular Disease, Brazil.

Numerous, ongoing outbreaks in Brazilian swine herds have been characterized by vesicular lesions in sows and acute losses of neonatal piglets. The complete genome of Seneca Valley virus (SVV) was identified in vesicular fluid and sera of sows, providing evidence of association between SVV and vesicular disease and viraemia in affected animals.

Longitudinal Evaluation of Bond Strength to Enamel of Dental Adhesive Systems Associated with Nd:YAG Laser.

OBJECTIVES: This study evaluated the durability of bond strength to enamel using total-etch (Single Bond/SB) and self-etch (Clearfil SE Bond/CSEB) adhesives associated with neodymium:yttrium-aluminu-garnet (Nd:YAG) laser irradiation through the uncured adhesives. METHODS: Bovine incisors were worn to expose an area of enamel and were divided into four groups: group 1 (control) SB + polymerization; group 2 (control) CSEB + polymerization; group 3 (laser) - SB + Nd:YAG laser (174.16 J/cm(2)) + polymerization; and group 4 (laser) CSEB + Nd:YAG (174.16 J/cm(2)) + polymerization. Blocks of composite were fabricated and stored for 24 hours or 12 months, sectioned into beams, and submitted to microtensile tests. Results were analyzed by three-way analysis of variance (ANOVA) (adhesive, technique, and storage time) and Tukey tests. RESULTS: ANOVA revealed significant differences for adhesive × technique and technique × storage time (p<0.05). The mean values (MPa) for interaction adhesive × technique (standard deviation) were as follows: SB/control = 35.78 (6.04)a; SB/laser = 26.40 (7.25)b, CSEB/control = 26.32 (5.71)b, CSEB/laser = 23.90 (7.49)b. For interaction technique × storage time the mean values were as follows: control/24 hours = 32.58 (6.49)a; control/12 months = 29.52 (8.38)a; laser/24 hours = 29.37 (5.71)a; laser/12 months = 20.92 (6.5)b. Groups with the same letters showed no statistically significant differences. CONCLUSION: Scanning electron microscope analysis showed evident areas of micromorphological alterations in lased samples after 12 months of water storage. Nd:YAG laser irradiation of enamel through unpolymerized total-etch adhesive significantly reduced bond strength compared with the control. Bond strength decreased when enamel samples irradiated with Nd:YAG laser through unpolymerized adhesives were stored in water for 12 months.

Influence of different surface treatments on bond strength of resin composite using the intrinsic characterization technique.

OBJECTIVE: This study evaluated the influence of different surface treatments on the resin bond strength/light-cured characterizing materials (LCCMs), using the intrinsic characterization technique. The intrinsic technique is characterized by the use of LCCMs between the increments of resin composite (resin/thin film of LCCM/external layer of resin covering the LCCM). MATERIALS AND METHODS: Using a silicone matrix, 240 blocks of composite (Z350/3M ESPE) were fabricated. The surfaces received different surface treatments, totaling four groups (n=60): Group C (control group), no surface treatment was used; Group PA, 37% phosphoric acid for one minute and washing the surface for two minutes; Group RD, roughening with diamond tip; and Group AO, aluminum oxide. Each group was divided into four subgroups (n=15), according to the LCCMs used: Subgroup WT, White Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup BT, Black Tetric Color pigment (Ivoclar/Vivadent) LCCM; Subgroup WK, White Kolor Plus pigment (Kerr) LCCM; Subgroup BK, Brown Kolor Plus pigment (Kerr) LCCM. All materials were used according to the manufacturer's instructions. After this, block composites were fabricated over the LCCMs. Specimens were sectioned and submitted to microtensile testing to evaluate the bond strength at the interface. Data were submitted to two-way analysis of variance (ANOVA) (surface treatment and LCCMs) and Tukey tests. RESULTS: ANOVA presented a value of p<0.05. The mean values (±SD) for the factor surface treatment were as follows: Group C, 30.05 MPa (±5.88)a; Group PA, 23.46 MPa (±5.45)b; Group RD, 21.39 MPa (±6.36)b; Group AO, 15.05 MPa (±4.57)c. Groups followed by the same letters do not present significant statistical differences. The control group presented significantly higher bond strength values than the other groups. The group that received surface treatment with aluminum oxide presented significantly lower bond strength values than the other groups. CONCLUSION: Surface treatments of composite with phosphoric acid, diamond tip, and aluminum oxide significantly diminished the bond strength between composite and the LCCMs.

Two-year clinical performance of self-etching adhesive systems in composite restorations of anterior teeth.

OBJECTIVE: The aim of this study was to evaluate the two-year clinical performance of Class III, IV, and V composite restorations using a two-step etch-and-rinse adhesive system (2-ERA) and three one-step self-etching adhesive systems (1-SEAs). MATERIAL AND METHODS: Two hundred Class III, IV, and V composite restorations were placed into 50 patients. Each patient received four composite restorations (Amaris, Voco), and these restorations were bonded with one of three 1-SEAs (Futurabond M, Voco; Clearfil S3 Bond, Kuraray; and Optibond All-in-One, Kerr) or one 2-ERA (Adper Single Bond 2/3M ESPE). The four adhesive systems were evaluated at baseline and after 24 months using the following criteria: restoration retention, marginal integrity, marginal discoloration, caries occurrence, postoperative sensitivity and preservation of tooth vitality. After two years, 162 restorations were evaluated in 41 patients. Data were analyzed using the χ(2) test (p<0.05). RESULTS: There were no statistically significant differences between the 2-ERA and the 1-SEAs regarding the evaluated parameters (p>0.05). CONCLUSION: The 1-SEAs showed good clinical performance at the end of 24 months.

Influence of Nd:YAG laser on the bond strength of self-etching and conventional adhesive systems to dental hard tissues.

PURPOSE: The aim of this study was to investigate the influence of Nd:YAG laser on the shear bond strength to enamel and dentin of total and self-etch adhesives when the laser was applied over the adhesives, before they were photopolymerized, in an attempt to create a new bonding layer by dentin-adhesive melting. MATERIAL AND METHODS: One-hundred twenty bovine incisors were ground to obtain flat surfaces. Specimens were divided into two substrate groups (n=60): substrate E (enamel) and substrate D (dentin). Each substrate group was subdivided into four groups (n=15), according to the surface treatment accomplished: X (Xeno III self-etching adhesive, control), XL (Xeno III + laser Nd:YAG irradiation at 140 mJ/10 Hz for 60 seconds + photopolymerization, experimental), S (acid etching + Single Bond conventional adhesive, Control), and SL (acid etching + Single Bond + laser Nd:YAG at 140 mJ/10 Hz for 60 seconds + photopolymerization, experimental). The bonding area was delimited with 3-mm-diameter adhesive tape for the bonding procedures. Cylinders of composite were fabricated on the bonding area using a Teflon matrix. The teeth were stored in water at 37°C/48 h and submitted to shear testing at a crosshead speed of 0.5 mm/min in a universal testing machine. Results were analyzed with three-way analysis of variance (ANOVA; substrate, adhesive, and treatment) and Tukey tests (α=0.05). ANOVA revealed significant differences for the substrate, adhesive system, and type of treatment: lased or unlased (p<0.05). The mean shear bond strength values (MPa) for the enamel groups were X=20.2 ± 5.61, XL=23.6 ± 4.92, S=20.8 ± 4.55, SL=22.1 ± 5.14 and for the dentin groups were X=14.1 ± 7.51, XL=22.2 ± 6.45, S=11.2 ± 5.77, SL=15.9 ± 3.61. For dentin, Xeno III self-etch adhesive showed significantly higher shear bond strength compared with Single Bond total-etch adhesive; Nd:YAG laser irradiation showed significantly higher shear bond strength compared with control (unlased). CONCLUSION: Nd:YAG laser application prior to photopolymerization of adhesive systems significantly increased the bond strength to dentin.

Phylogenetic analysis of Pneumocystis from pig lungs obtained from slaughterhouses in southern and midwestern regions of Brazil / Análise filogenética de Pneumocystis obtidos de pulmões de suínos provenientes de abatedouros da região sul e centro oeste do Brasil

The Pneumocystis genus is comprised of pathogens dwelling in the lungs of terrestrial, aerial, and aquatic mammals. Occasionally they induce severe pneumonitis, particularly in hosts with severe impairment of the immune system and progressively may fill pulmonary alveolar cavities causing respiratory failure. Molecular genetic studies revealed that Pneumocystis gene sequences present a marked divergence with the host species concerned. In the present study, the genetic diversity of Pneumocystis obtained from lungs of swines was examined by analyzing mitochondrial large subunit (mtLSU) and small subunit (mtSSU) rRNA sequences. The samples were obtained from two slaughterhouses located in two Brazilian states. Phylogenetic analysis demonstrated that genetic groupings within Pneumocystis organisms were in accordance with those of the corresponding hosts and that two clusters were formed. In conclusion, these data show that there are genetically distinct porcine Pneumocystis genotypes with at least two separate clusters in Brazil.

O gênero Pneumocystis compreende patógenos que residem em pulmões de animais terrestres, aéreos e aquáticos. Pode ocasionar uma grave pneumonia, particularmente em hospedeiros com o sistema imunológico seriamente comprometido, o que ocorre por meio de uma progressiva disseminação nas cavidades alveolares, causando insuficiência respiratória. Estudos genéticos, baseados em métodos moleculares, revelaram que as sequências dos genes de Pneumocystis apresentam marcante divergência de acordo com a espécie de hospedeiro. Neste estudo, a diversidade genética das amostras obtidas a partir de pulmões de suínos, provenientes de dois abatedouros localizados em dois estados brasileiros, foi examinada por análise das sequencias dos nucleotídeos dos produtos de PCR dos genes mtLSU e mtSSU do rRNA do Pneumocystis. O resultado confirma a tendência registrada em pesquisas com amostras de outros animais e permite concluir que existem, pelo menos, dois grupos filogenéticos distintos de Pneumocystis de suínos no Brasil.

Porcine circovirus-2 load in the gastrointestinal tract, mesenteric lymph node, tonsil, and feces of wasted pigs with and without diarrhea / Carga viral de circovírus suíno-2 no trato gastrintestinal, linfonodo mesentérico, tonsila e fezes de animais refugo com e sem diarreia

Relata-se a quantificação de PCV-2, por meio de PCR em tempo real, no trato gastrintestinal, linfonodo mesentérico, tonsilas e fezes de nove suínos refugo da fase de crescimento, provenientes de rebanhos com histórico de diarreia não responsiva ao tratamento com antibioticoterapia. Com base nos resultados histopatológicos e imunoistoquímicos, os animais foram classificados como afetados por PCV-2 (n=5) e não afetados (n=4). Foi observada diarreia em todos os animais do grupo afetado por PCV-2. Em todas as amostras testadas foi detectado PCV-2, no entanto, a carga viral observada nos tecidos, bem como a excreção nas fezes foi significantemente maior (P<0.01) nos animais com diarreia. A maior concentração de PCV-2 foi observada nos linfonodos mesentéricos. A carga viral observada em tecido fresco e nas mesmas amostras emblocadas em parafina foi semelhante, sugerindo que o PCR em tempo real pode ser uma ferramenta útil em estudos retrospectivos da infecção por PCV-2.

Salmonella enterica: isolamento e soroprevalência em suínos abatidos no Rio Grande do Sul / Salmonella enterica: isolation and seroprevalence in swines slaughtered in Rio Grande do Sul

Estudou-se a prevalência de Salmonella spp. em suínos ao abate e compararam-se os resultados obtidos no isolamento e na sorologia de modo a determinar a fase mais importante de infecção (granja ou transporte/espera pré-abate) em relação ao número de suínos portadores encontrados ao abate. Foram avaliados 40 rebanhos de três diferentes empresas do sul do Brasil, com colheitas de sangue e linfonodos mesentéricos de 20 animais por lote. O soro foi submetido ao ELISA produzido com antígeno somático de Salmonella Typhimurium. A frequência de isolamento variou de 62,5 por cento a 85,0 por cento, enquanto a soroprevalência de 73,8 por cento a 83,2 por cento nos três sistemas amostrados. Os sorovares mais prevalentes foram Agona, Typhimurium e Panama. A infecção dos animais ocorreu nas granjas produtoras de suínos nestes sistemas de produção, pois os lotes apresentaram elevada soroprevalência ao abate. Concluiu-se que o controle da infecção por Salmonella spp. no sul do Brasil deve iniciar-se pela implementação de medidas de profilaxia nas granjas de produção de suínos.

The prevalence of Salmonella in slaughtered swines was evaluated and the results of serology and Salmonella isolation were compared to determine the most important stage of the infection (on-farm or transport and pre-slaughter) in relation to the number of carrier animals found at slaughter. Forty herds from three different swine raisers of the southern region of Brazil were sampled at slaughter. Blood and mesenteric lymph nodes were collected from 20 swines of each herd. Serum samples were submitted to ELISA including somatic antigens of S. Typhimurium. Salmonella was isolated from 62.5 percent to 85.0 percent of the animals, while seroprevalence varied from 73.8 percent to 83.2 percent in the three swine raisers. Serovar Agona, Typhimurium, and Panama were the most prevalent among the Salmonella isolates. Isolation and serological results demonstrated that Salmonella infection occurred during the on-farm stage, since a high seroprevalence was detected at slaughter. It was concluded that a Salmonella control program in southern Brazil must be started with the implementation of intervention measures at farm level.

Identification of porcine intestinal spirochetes by PCR-restriction fragment length polymorphism analysis of ribosomal DNA encoding 23S rRNA.

The Brachyspira (formerly Serpulina) species rrl gene encoding 23S ribosomal RNA (rRNA) was used as a target for amplification of a 517bp DNA fragment by polymerase chain reaction (PCR). The primers for PCR amplification had sequences that were conserved among Brachyspira 23S rRNA gene and were designed from nucleotide sequences of Brachyspira hyodysenteriae, Serpulina intermedia, Brachyspira innocens and Brachyspira pilosicoli available from the GenBank database. Digestion of PCR-generated products from reference and field isolates of swine intestinal spirochetes with restriction enzymes Taq I and Alu I revealed five restriction fragment length polymorphism (RFLP) patterns. Each RFLP pattern corresponded to previously established genetic groups including B. hyodysenteriae (I), S. intermedia/B. innocens (II), Brachyspira murdochii (III), B. pilosicoli (IV) and B. alvinipulli (V). The 23S rRNA PCR/RFLP provided a relatively simple genotypic method for identification of porcine pathogenic B. hyodysenteriae and B. pilosicoli.

Prevalence of Brachyspira species isolated from diarrhoeic pigs in Brazil.

Pathogenic intestinal spirochaetes of pigs include Brachyspira (formerly Serpulina) hyodysenteriae, the cause of swine dysentery, and Brachyspira pilosicoli, the cause of porcine colonic spirochetosis (PCS). The purpose of this study was to assess the relative importance of Brachyspira species in diarrhoeal disease of growing pigs on farms in southern Brazil. The intensity and pattern of haemolysis, the production of indole and the hydrolysis of hippurate by reference and field porcine intestinal spirochaetes were compared with 16S-ribosomal RNA (mRNA)- and 23S-rRNA-based polymerase chain reaction assays for the identification of B hyodysenteriae and B pilosicoli. Between July and October 1998, 206 rectal swabs were taken from pigs on 17 farms with a history of diarrhoea developing within 30 days after they had been moved from nursery to growing facilities. Of 49 beta-haemolytic spirochaetes that were cultured, 29 (59.2 per cent) were grown in pure culture for phenotypic and genotypic characterisation, leaving 20 untyped. Of the 29 typed isolates, eight isolates obtained from six farms were identified as B hyodysenteriae, and 15 isolates obtained from seven other farms were identified as B pilosicoli; the remaining six isolates were identified as weakly beta-haemolytic commensal spirochaetes. There was complete agreement between the results of the phenotypic and genotypic analyses.

Comparaçäo de métodos de isolamento de bactérias NAD-dependentes do trato respiratório superior de suínos sadios / Methods to isolate NAD-dependent bacteria from the upper respiratory tract of health pigs

Secreçöes nasais, tonsilares e tecido tonsilar foram coletados de 67 leitöes de 9 a 15 semanas de idade, provenientes de três rebanhos positivos para Actinobacillus pleuropneumoniae (App), e de 50 leitöes provenientes de dois rebanhos, negativos. Foram classificados como positivos aqueles rebanhos com isolamento prévio de sorotipos 3, 5 e 7 e rebanhos negativos aqueles submetidos a controle veterinário, sem notificaçäo de sintomas clínicos, lesöes de pleuropneumonia suína e sem isolamento do agente. O material coletado foi submetido a três diferentes métodos de cultivo: 1- semeadura direta em meio de cultivo sólido seletivo; 2- diluiçäo em caldo seletivo seguido de subsemeadura em meio de cultivo sólido seletivo; 3- diluiçäo em caldo seletivo seguido de subsemeadura em ágar sangue. Entre as amostras NAD-dependentes recuperadas 86 foram classificadas como App, 13 como grupo minor e 21 como grupo taxon (C, D, E e F). Dos rebanhos positivos foram recuperadas quatro amostras de App (sorotipos 3, 7 e 12) e 51 näo sorotipificáveis. Dos rebanhos negativos foram recuperadas 31 amostras de App näo sorotipificáveis, indicando que o App faz parte da flora normal do trato respiratório superior dos suínos. O melhor método de isolamento de amostras NAD-dependentes de leitöes portadores foi da biópsia de tecido tonsilar semeado diretamente em meio sólido seletivo (PPLO ágar adicionado de 2 mica grama de cristal violeta, 10 mica grama NAD, 1 mica grama de lincomicina, 1,4 mica grama de bacitracina por ml)

Utilizaçäo de um teste de ELISA polivalente para detecçäo de anticorpos contra Actinobacillus pleuropneumoniae (App) / Utilization of a polyvalent ELISA test for detection antibodies against of Actinobacillus pleuropneumoniae

Um teste de ELISA polivalente baseado em lipopolissacarídeos de cadeia longa (LPS - CL) de Actinobacillus pleuropneumoniae (App) sorotipos 3, 5 e 7 foi avaliado testando-se amostras do soro de leitöes e matrizes provenientes de 10 rebanhos positivos e de 10 rebanhos negativos. Foram classificados como positivos aqueles rebanhos com isolamento prévio do App sorotipos 3, 5 ou 7 e rebanhos negativos aqueles submetidos ao controle veterinário, sem notificaçäo de sintomas clínicos, sem lesöes de pleuropneumonia suína e sem isolamento do agente. Todos os rebanhos positivos apresentaram sorologia positiva e as matrizes apresentaram maior número de soroconversores (P<0,05) do que os leitöes. Entre os rebanhos negativos quatro apresentaram sorologia negativa, cinco sorologia positiva com valores preditivos altos (96 a 99 por cento) e um com valor preditivo considerado baixo (56 por cento). O teste apresentou 100 por cento de sensibilidade e aparentemente baixa especificidade, porém, como detectou os sorotipos prevalentes no Brasil e sorotipos que possuem LPS - CL homólogos (3, 4, 5, 6, 7 e 8), ele é aplicável somente como teste de triagem