Effect of Seawater with Average Salinity on the Moisture Content, Ash Content and Tensile Strength of Some Coniferous Wood.

In this paper, the differences in mechanical strength tested during the static tensile and compression test of Scots pine (Pinus sylvestris L.), European larch (Larix decidua) and Norway spruce (Picea abies) wood exposed to continuous soaking in water with a salinity of 7‱ were determined. The value of salinity corresponded to the average salinity on the Polish Baltic coast. This paper also aimed to examine the content of mineral compounds absorbed during four cycles of two weeks each. The essence of the statistical research was to identify the effect of the mineral range compounds and salts depending on the mechanical strength of the wood. Based on the results of the experiments, it can be concluded that the medium used has a specific effect on the wood species' structure. The effects of soaking on the wood parameters depend obviously on the type of wood. A tensile strength test of pine, as well as the tensile strength other species, was enhanced by incubating it in seawater. A native sample's initial mean tensile strength was 82.5 MPa, which increased to 94.8 MPa in the last cycle. It was found that the larch wood had the lowest tensile strength difference (9 MPa) of the woods studied in the current study. Four to six weeks of soaking was necessary to notice an increase in tensile strength.

Emission of harmful gases from animal production in Poland.

The aim of the study was to present the scale of greenhouse gas emissions from animal production, and to provide test results from different housing systems. In three free stall buildings, two with slurry in deep channels and one with cattle in cubicles staying on shallow litter concentration of ammonia and carbon dioxide were measured in summer season by using dedicated equipment from Industrial Scientific Research. Air exchange was calculated on the base of balance carbon dioxide method. This method was used in order to estimate the air flow rate. Concentrations of ammonia and CO2 were measured as the base for air exchange and ammonia emission rates. Ammonia emissions were product of ammonia concentration and air exchange rate. Temperature and relative humidity were measured to establish microclimate conditions in buildings tested to show the overall microclimatic situation in buildings. Differences between ammonia emission rates were observed in both housing systems. The highest ammonia emission rate was equal to 2.75 g·h-1·LU-1 in well-ventilated cattle barn with the largest herd size.