Gelatin/O-carboxymethyl chitosan injectable self-healing hydrogels for ibuprofen and naproxen dual release.

Recently, a significantly greater clinical benefit has been reported with a combination of glucosamine sulfate and nonsteroidal anti-inflammatory drugs (NSAIDs) compared to either treatment alone for the growing osteoarthritis (OA) disease. So, this study introduces hydrogels using O-carboxymethyl chitosan (O-CMC, structurally akin glucosamine glycan), and Gelatin type A (GA) in a 1:2 ratio with ß-glycerophosphate (ßGPh) at varying percentages (5 %, 12.5 %, and 15 %). We show that hydrogel properties, adaptable for drug delivery or tissue engineering, can be fine-tuned based on OCMC:ßGPh ratio. CMC/GA/ßGPh-12.5 exhibited a swelling rate of 189 %, compressive stress of 164 kPa, and compressive modulus of 3.4 kPa. The self-healing hydrogel also exhibited excellent injectability through a 21-gauge needle, requiring only 5 N of force. Ibuprofen and Naproxen release from CMC/GA/ßGPh-12.5 and CMC/GA/ßGPh-15 of designed dimensions (bi-layer structures of different diameter and height) were measured, and drug release kinetics were estimated using mathematical equations (MATLAB and polyfit program). CMC/GA/ßGPh-12.5 demonstrated significant antibacterial effects against E. coli and S. aureus, a high cell survival rate of 89 % against L929 fibroblasts, and strong cell adhesion, all indicating biocompatibility. These findings underscore potential of these hydrogels as promising candidates for treating inflammatory diseases such as osteoarthritis.

Impact of supramolecular interactions on delivery of dexamethasone from a physical network of gelatin/ZnHAp composite scaffold.

Synthesis of a supramolecular composite hydrogel, a novel class of physical and dynamic hydrogels, is reported. The hydrogel comprised gelatin (Gel), Zn-doped nano-hydroxyapatite (nZnHAp), and dexamethasone disodium phosphate (DEX). nZnHAp was functionalized with ureidopyrimidinone (UPy; quadruple hydrogen-bond-forming groups). The nHAp, nZnHAp, and nZnHApUPy were characterized by FTIR, EDX, SEM, and TGA analysis. Gelatin was also functionalized with UPy groups (GelUPy), and the nanocomposites were prepared in solution (GelUPy/nZnHApUPy). Dexamethasone was added to the composite hydrogels (15, 20, and 25 wt%), as an osteoinductive and anti-inflammation medicine (GelUPy/nZnHApUPy/DEX). The mechanical (in compression mode), rheological, and thermal properties of the GelUPy/nZnHApUPy/DEX were compared with those of GelUPy/nZnHAp/DEX. The GelUPy/nZnHApUPy/DEX series showed the maximum compressive modulus (about 841 KPa) for GelUPy/nZnHApUPy/DEX25% in the swollen state. DSC analysis indicated that Tg of the pure GelUPy decreased significantly upon composite preparation and drug loading from 160 °C for GelUPy, down to 107 °C for GelUPy/nZnHApUPy/DEX15%. In-vitro drug release studies confirmed sustained release of DEX over a period of 12 days for GelUPy/nZnHApUPy composites with no remarkable initial burst compared to that of the pure GelUPy. Overall, our data suggests that the DEX carrying supramolecular nanocomposite can be used as an osteogenic hydrogel scaffold for bone tissue engineering applications.

PEGylated curcumin-loaded nanofibrous mats with controlled burst release through bead knot-on-spring design.

APEGylatedcurcumin (PCU) loaded electrospuns based on poly(ε-caprolactone) (PCL) andpolyvinyl alcohol (PVA) were fabricated for wound dressing applications. The main reason for this wound dressing design is antibacterialactivity enhancement, and wound exudates management. PEGylation increases curcuminsantibacterial properties and PVA can help exudates management. For optimal wound dressing, first, response surface methodology (RSM) was applied to optimize the electrospinning parameters to achieve appropriate nanofibrous mats. Then a three-layer electrospun was designed by considering the water absorbability, PCU release profile as well as antibacterial and biocompatibility of the final wound dressing. The burst release in controlled release systems could be evaluated for prevention of the higher initial drug release and control the effective life time. The PCU release results illustrated that the bead knot plays a positive role in controlling the release profile andby increase in the number of beads per unit area from 3000 to 9000 mm-2,the PCU burst release will be reduced; Also in vitro studies show that optimized three-layer dressing based on PCL/PVA/PCU can support water vapour transmission rate in optimal range and also absorb more than three times exudates in comparison with mono-layerdressing. Antibacterial tests show that the electrospun wound dressing containing 5% PCU exhibits100% antibacterial activityas well as cell viability level within an acceptable range.

Designing and fabrication of curcumin loaded PCL/PVA multi-layer nanofibrous electrospun structures as active wound dressing.

Active wound dressings play a significant role in burn and chronic wound treatment. In this study, electrospinning process is used to fabricate a novel three-layer active wound dressing based on ε-polycaprolactone (PCL), polyvinylalcohol (PVA), and curcumin (CU) as a biologically active compound. The main purpose for developing such a system is to control wound exudates, which remains a challenge, as well as enjoying the anti-bacterial property. Electrospinning process parameters are optimized by response surface methodology to achieve appropriate nanofibrous electrospun mats, and then, a three-layer dressing has been designed in view of water absorbability, anti-bacterial, and biocompatibility characteristics of the final dressing. The results illustrate that a three-layer dressing based on PCL/curcumin containing PVA as a middle layer with optimized thickness which is placed over the incision, absorbs three times exudates in comparison with pristine dressing. Anti-bacterial tests reveal that the dressing containing 16% curcumin exhibits anti-bacterial activity without sacrificing the acceptable level of cell viability.

Enhanced Cardiac Differentiation of Human Cardiovascular Disease Patient-Specific Induced Pluripotent Stem Cells by Applying Unidirectional Electrical Pulses Using Aligned Electroactive Nanofibrous Scaffolds.

In the embryonic heart, electrical impulses propagate in a unidirectional manner from the sinus venosus and appear to be involved in cardiogenesis. In this work, aligned and random polyaniline/polyetersulfone (PANI/PES) nanofibrous scaffolds doped by Camphor-10-sulfonic acid (ß) (CPSA) were fabricated via electrospinning and used to conduct electrical impulses in a unidirectional and multidirectional fashion, respectively. A bioreactor was subsequently engineered to apply electrical impulses to cells cultured on PANI/PES scaffolds. We established cardiovascular disease-specific induced pluripotent stem cells (CVD-iPSCs) from the fibroblasts of patients undergoing cardiothoracic surgeries. The CVD-iPSCs were seeded onto the scaffolds, cultured in cardiomyocyte-inducing factors, and exposed to electrical impulses for 1 h/day, over a 15-day time period in the bioreactor. The application of the unidirectional electrical stimulation to the cells significantly increased the number of cardiac Troponin T (cTnT+) cells in comparison to multidirectional electrical stimulation using random fibrous scaffolds. This was confirmed by real-time polymerase chain reaction for cardiac-related transcription factors (NKX2.5, GATA4, and NPPA) and a cardiac-specific structural gene (TNNT2). Here we report for the first time that applying electrical pulses in a unidirectional manner mimicking the unidirectional wave of electrical stimulation in the heart, could increase the derivation of cardiomyocytes from CVD-iPSCs.

Substrate-mediated commitment of human embryonic stem cells for hepatic differentiation.

Human embryonic stem cell (hESC)-derived endodermal cells are of interest for the development of cellular therapies to treat disorders such as liver failure. The soluble form of activin A (Act) has been widely used as an in vitro inducer of definitive endoderm (DE). In this study, we have developed a nanofibrous poly (ɛ-caprolactone) substrate, biofunctionalized with Act, for directed differentiation of hESCs into DE. Bioconjugation of Act on nanofibrous meshes was confirmed by enzyme-linked immunosorbent assay (ELISA) and immunostaining. In order to investigate the bioactivity of immobilized Act (iAct), hESCs were cultivated on the Act-conjugated nanofibers for five days. The nanofibers with covalent iAct significantly increased expression levels of the endodermal markers SOX17, FOXA2, and CXCR4, compared with physically adsorbed Act (aAct) or without Act (noAct). In addition, iAct retained its bioactivity after storage for five days in the absence of cell seeding. The capability of cultivated cells to generate the DE-derived lineage was evaluated through further differentiation of seeded cells into hepatocyte-like cells (HLCs). Interestingly, the iAct sample showed a higher level of hepatic markers compared to the aAct sample. We also demonstrated that iAct in the presence of soluble Act (sAct) could improve the conventional protocol to generate HLCs from hESCs. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2861-2872, 2016.

A stability-indicating HPLC method for simultaneous determination of morphine and naltrexone.

This study developed a stability-indicating reversed-phase HPLC method for the simultaneous determination of morphine sulfate and naltrexone hydrochloride content in bulk, Solid dosage forms and in-vitro dissolution samples to support product development and quality control efforts. Chromatographic separation of the pharmaceutical compound was achieved on a perfectSil™ MZ C18 column (250×4.6mm, 5µm) with an isocratic mobile phase composed of a mixture of acetate buffer (10mM, pH 4, containing 0.1% of 1-heptanesulfonic acid sodium salt) and acetonitrile with 80/20 at a flow rate of 1.5mlmin(-1). Both analytes were quantified using a photodiode array detector set at a wavelength of 280nm and column temperature was set to 30°C. naltrexone, morphine and a mixture of the two were subjected to thermal, peroxide, acid, base and photolytic degradation and their peak homogeneity was obtained using a photodiode array detector, demonstrating the specificity of method. These pharmaceuticals were spiked in biological fluid to examine method selectivity. The method was validated for system suitability, linearity, accuracy, precision, detection and quantification limits and robustness and was found it is acceptable in range of 2-250µgml(-1) for morphine and 4-100µgml(-1) for naltrexone.

Rationalization of specific structure formation in electrospinning process: Study on nano-fibrous PCL- and PLGA-based scaffolds.

Formation of specific structures on poly-ɛ-caprolactone (PCL) and poly lactide-co-glycolide (PLGA) based electrospun mats is rationalized and the effect of interactive parameters; high voltage and flow rate on unique surface topography is evaluated. By increasing the collecting time in electrospinning process and enhancing fiber to fiber repulsion, surface characteristics of mats changes from nano- to micro-topography. In this study surface topography of the fabricated mats based on PCL and PLGA were assessed using AFM and SEM techniques to display the distinct phenomenon occurs on collected random fibers. In this research the rationale behind the formation of bump and flower like structures on fibrous mats was discussed. Because of great potential application of the fabricated substrates in the fields of medical purposes, cell-matrix interaction was evaluated and in vitro biological test with human dermal fibroblast and mouse L929 fibroblast cells was performed to study the cell responses to different roughness of nano-fibers collected at different time intervals. Our results show that after 7 days, cell proliferation is improved on PCL collected at 40 min in the case of human fibroblast cells and on PCL collected in 70 min in the case of L929 mouse fibroblast cells.

Nanotopographical control of human embryonic stem cell differentiation into definitive endoderm.

Derivation of definitive endoderm (DE) from human embryonic stem cells (hESCs) can address the needs of regenerative medicine for endoderm-derived organs such as the pancreas and liver. Fibrous substrates which topographically recapitulate native extracellular matrix have been known to promote the stem cell differentiation. However, the optimal fiber diameter remains to be determined for the desired differentiation. Here, we have developed a simple method to precisely fabricate electrospun poly(ε-caprolactone) fibers with four distinct average diameters at nano- and microscale levels (200, 500, 800, and 1300 nm). Human ESCs were cultured as clumps or single cells and induced into DE differentiation to determine the optimal topography leading to the promoted differentiation compared with planar culture plates. Gene expression analysis of the DE-induced cells showed significant upregulation of DE-specific genes exclusively on the 200-nm fibers. By Western blot analysis, significant expression of DE-specific proteins was found when hESCs were cultured on the 200 nm substrate as single cells rather than clumps, probably due to more efficient cell-matrix interaction realized by morphological observations of the cell colonies. The results indicated that nanofibrillar substrates, only at ultrathin fiber diameters, provided a better environment for DE differentiation of hESC, which holds great promise in prospective tissue engineering applications.

Human Bone Marrow Mesenchymal Stem Cell Behaviors on PCL/Gelatin Nanofibrous Scaffolds Modified with A Collagen IV-Derived RGD-Containing Peptide.

OBJECTIVE: We introduce an RGD (Arg-Gly-Asp)-containing peptide of collagen IV origin that possesses potent cell adhesion and proliferation properties. MATERIALS AND METHODS: In this experimental study, the peptide was immobilized on an electrospun nanofibrous polycaprolactone/gelatin (PCL/Gel) hybrid scaffold by a chemical bonding approach to improve cell adhesion properties of the scaffold. An iodine-modified phenylalanine was introduced in the peptide to track the immobilization process. Native and modified scaffolds were characterized with scanning electronmicroscopy (SEM) and fourier transform infrared spectroscopy (FTIR). We studied the osteogenic and adipogenic differentiation potential of human bone marrow-derived mesenchymal stem cells (hBMSCs). In addition, cell adhesion and proliferation behaviors of hBMSCs on native and peptide modified scaffolds were evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and 4',6-diamidino-2-phenylindole (DAPI) staining, and the results compared with tissue culture plate, as the control. RESULTS: FTIR results showed that the peptide successfully immobilized on the scaffold.MTT assay and DAPI staining results indicated that peptide immobilization had a dramatic effect on cell adhesion and proliferation. CONCLUSION: This peptide modified nanofibrous scaffold can be a promising biomaterial for tissue engineering and regenerative medicine with the use of hBMSCs.

Investigation of aqueous stability of taxol in different release media.

In the present study, the aqueous stability of taxol in different aqueous media and immiscible aqueous/organic systems at 37 °C was investigated. The aqueous media included phosphate buffered saline (PBS) and PBS containing 10% methanol, 10% ethanol, 10% hydroxypropyl ß-cyclodextrin (HP-ßCD), 1% sodium citrate and 1% Tween 80. The immiscible systems consisted of PBS/octanol, PBS/dichloromethane, PBS/chloroform and PBS/ethyl acetate. The concentrations of taxol and related derivatives in each of the media were determined through the high-performance liquid chromatography assay. Results showed that hydrolysis and epimerization were two major types of degradation for taxol in the aqueous media starting from the initial hours of contact (6 hours). Addition of Tween 80 to PBS moderately increased the aqueous stability of taxol. As well, using PBS containing 10% HP-ßCD inhibited the taxol hydrolysis, while epimerization still in process. In the case of immiscible systems, except for PBS/ethyl acetate system, no evidences of taxol hydrolysis were observed. Meanwhile, epimerization of taxol in PBS/dichloromethane and PBS/chloroform systems underwent due to the ability of C-Cl bonds to form hydrogen bonding with the hydroxyl group of C7 of taxol.

The effect of topography on differentiation fates of matrigel-coated mouse embryonic stem cells cultured on PLGA nanofibrous scaffolds.

Due to pluripotency of embryonic stem (ES) cells, these cells are an invaluable in vitro model that investigates the influence of different physical and chemical cues on differentiation/development pathway of specialized cells. We sought the effect of roughness and alignment, as topomorpholocial properties of scaffolds on differentiation of green fluorescent protein-expressing ES (GFP-ES) cells into three germ layers derivates simultaneously. Furthermore, the effect of Matrigel as a natural extracellular matrix in combination with poly(lactic-co-glycolic acid) (PLGA) nanofibrous scaffolds on differentiation of mouse ES cells has been investigated. The PLGA nanofibrous scaffolds with different height and distribution of roughness and alignments were fabricated. Then, the different cell differentiation fats of GFP-ES cells plated on PLGA and PLGA/Matrigel scaffolds were analyzed by gene expression profiling. The findings demonstrated that distinct ranges of roughness, height, and distribution can support/promote a specific cell differentiation fate on scaffolds. Coating of scaffolds with Matrigel has a synergistic effect in differentiation of mesoderm-derived cells and germ cells from ES cells, whereas it inhibits the derivation of endodermal cell lineages. It was concluded that the topomorpholocial cues such as roughness and alignment should be considered in addition to other scaffolds properties to design an efficient electrospun scaffold for specific tissue engineering.

Differentiation of embryonic stem cells into neural cells on 3D poly (D, L-lactic acid) scaffolds versus 2D cultures.

In this study, a highly porous poly (D, L-lactic acid) (PDLLA) scaffold was designed and fabricated using dioxane and thermal-induced phase separation (TIPS) methods (liquid-liquid and solid-liquid). Additionally, we characterized the ability of mouse embryonic stem cells (ESCs) to differentiate into neural cells in PDLLA scaffold with uniform porosity, interconnectivity, and high porosity, and then compared them with cells seeded under conventional two-dimensional (2D) culture conditions. Histochemistry staining showed the migration of differentiated cells through the scaffold. Immunofluorescence analysis of the differentiated cells by counting positive cells revealed that the PDLLA scaffold resulted in a significantly greater number of neural markers, microtubule associated protein-2, ß-tubulin III, neurofilament protein, and glial fibrillary acidic protein (the astrocyte marker) when compared to those in 2D culture condition. Moreover, the expression of Nestin, Mash1, Pax6, and HB9 increased significantly in 3D scaffolds when compared with 2D cultures as detected by semi-quantitative RT-PCR. Scanning electron microscopy of differentiated neurons on scaffolds also demonstrated favorable results for neurite outgrowth. The results of this study demonstrated a promising effect of 3D scaffold culture for neural cell differentiation from ESCs in prospective tissue engineering applications.