Recovery of Precious Metals: A Promising Process Using Supercritical Carbon Dioxide and CO2-Soluble Complexing Polymers for Palladium Extraction from Supported Catalysts.

Precious metals such as palladium (Pd) have many applications, ranging from automotive catalysts to fine chemistry. Platinum group metals are, thus, in massive demand for industrial applications, even though they are relatively rare and belong to the list of critical materials for many countries. The result is an explosion of their price. The recovery of Pd from spent catalysts and, more generally, the development of a circular economy process around Pd, becomes essential for both economic and environmental reasons. To this aim, we propose a sustainable process based on the use of supercritical CO2 (i.e., a green solvent) operated in mild conditions of pressure and temperature (p = 25 MPa, T = 313 K). Note that the range of CO2 pressures commonly used for extraction is going from 15 to 100 MPa, while temperatures typically vary from 308 to 423 K. A pressure of 25 MPa and a temperature of 313 K can, therefore, be viewed as mild conditions. CO2-soluble copolymers bearing complexing groups, such as pyridine, triphenylphosphine, or acetylacetate, were added to the supercritical fluid to extract the Pd from the catalyst. Two supported catalysts were tested: a pristine aluminosilicate-supported catalyst (Cat D) and a spent alumina supported-catalyst (Cat A). An extraction conversion of up to more than 70% was achieved in the presence of the pyridine-containing copolymer. The recovery of the Pd from the polymer was possible after extraction, and the technological and economical assessment of the process was considered.

Supercritical CO2 Extraction of Palladium Oxide from an Aluminosilicate-Supported Catalyst Enhanced by a Combination of Complexing Polymers and Piperidine.

Precious metals, in particular Pd, have a wide range of applications in industry. Due to their scarcity, precious metals have to be recycled, preferably with green and energy-saving recycling processes. In this article, palladium extraction from an aluminosilicate-supported catalyst, containing about 2 wt% (weight%) of Pd (100% PdO), with supercritical CO2 (scCO2) assisted by complexing polymers is described. Two polymers, p(FDA)SH homopolymer and p(FDA-co-DPPS) copolymer (FDA: 1,1,2,2-tetrahydroperfluorodecyl acrylate; DPPS: 4-(diphenylphosphino)styrene), were tested with regards to their ability to extract palladium. Both polymers showed relatively low extraction conversions of approximately 18% and 30%, respectively. However, the addition of piperidine as activator for p(FDA-co-DPPS) allowed for an increase in the extraction conversion of up to 60%.

New pyrazole-based ligands with two tripodal binding pockets: potential scaffolds for metallobiosite modeling.

The synthesis of a new set of bioinspired dinucleating ligand scaffolds HL1-HL3 based on a bridging pyrazolate with appended chelate arms is reported. The ligands provide two binding compartments akin to the tris(imidazolyl)methane motif, predisposed to act as facially tridentate coordination caps. Potentiometric titrations of HL1 in the presence of Ni2+ and Zn2+ reveal formation of species with a metal:ligand ratio 1:1 in aqueous solution, and UV-vis data for the NiII system suggest that the complex [L12Ni2]2+ with (NiN6) chromophore is formed under appropriate pH conditions. In contrast, trinickel(II) complexes [L2 2Ni3(NO3)4(MeOH)2] (4) and [L2 2Ni3Cl2(MeOH)4]Cl2 (5) could be obtained from MeOH solutions and characterized crystallographically. The anticipated tripodal (N3) binding mode of the ligand is indeed realized for the central NiII ion, but the counteranions or MeOH solvent molecules lead to dissociation of one of the N donor legs for the outer NiII ions with formation of intramolecular H-bonds between a Ni-bound MeOH and the pyrazolate-N. X-ray crystals structures were also obtained for three CuI complexes [L3 2Cu4X2](PF6) 2 with X = PMe3 (6), CNnBu (7), CNC6H3Me2-2,6 (8), where all CuI ions are three-coordinate in a distorted trigonal-planar arrangement. The two inner metals are bound to two imidazole-N from one ligand sidearm and a pyrazolate-N from the other ligand while the outer CuI ions are hosted by the pyrazolate-N and one imidazole-N from the nearby sidearm with the third coordination site filled by the coligand X. Spectroscopic and ESI-MS data suggest that the trinickel complexes stay intact even in coordinating solvents while the Cu (I) complexes in solution are partly dissociated into their bimetallic constituents. The solid state structures observed for the oligonuclear complexes 4- 8 are reminiscent of the coordination motifs previously found for related mononuclear complexes based on tripodal tris(imidazolyl)methane, which corroborates the description of HL1-HL3 as novel binucleating versions of such tris(imidazolyl)methane ligands.

Biomimetic hydrolysis of penicillin G catalyzed by dinuclear zinc(II) complexes: structure-activity correlations in beta-lactamase model systems.

A series of highly preorganized pyrazolate-based dinuclear zinc complexes has been studied as functional synthetic analogues of metallo-beta-lactamases, a class of bacterial enzymes that cause serious clinical problems because of their degradation of common beta-lactam antibiotics. We have investigated the hydrolytic cleavage of penicillin G mediated by the different dinuclear zinc complexes, and have deduced structure-activity correlations. While cooperative effects of the adjacent metal ions might be operative, these are found to either enhance or diminish beta-lactamase activity with respect to a single free zinc. Drastic differences in activity are ascribed to a lack of accessible binding sites after incorporation of the substrate within the bimetallic pocket of 2 and 4, whereas partial detachment of hemilabile ligand side arms in 1 and 3 opens up available coordination sites for nucleophile activation and/or for binding and polarisation of the beta-lactam amide oxygen atom. This interpretation has been corroborated by NMR spectroscopic and mass spectrometric evidence as well as by X-ray crystallography of several adducts formed between the pyrazolate-based dinuclear zinc scaffolds and the small substrate analogue oxazetidinylacetate (oaa), 5-7. In all adducts, the carboxylate group of oaa is the primary anchoring site and is nested in a bridging position within the bimetallic pocket. However, zinc binding of the beta-lactam amide oxygen atom has been confirmed crystallographically for the first time in 7, in which additional open-site coordination sites are available.

Effect of Zn...Zn separation on the hydrolytic activity of model dizinc phosphodiesterases.

From the study of highly preorganized model systems, experimental support has been obtained for a possible functional role of the Zn-(H)O...HO(H)-Zn motif in oligozinc hydrolases. The mechanistic relevance of such an array, which may be described as a hydrated form of a pseudo-terminal Zn-bound hydroxide, has recently been supported by DFT calculations on various metallohydrolase active sites. In the present targeted approach, the Zn...Zn distance in two related dizinc complexes has been controlled through the use of multifunctional pyrazolate-based ligand scaffolds, giving either a tightly bridged Zn-O(H)-Zn or a more loosely bridged Zn-(H)O...HO(H)-Zn species in the solid state. Zn-bound water has been found to exhibit comparable acidity irrespective of whether the resulting hydroxide is supported by strong hydrogen-bonding in the O(2)H(3) moiety or is in a bridging position between two zinc ions, indicating that water does not necessarily have to adopt a bridging position in order for its pK(a) to be sufficiently lowered so as to provide a Zn-bound hydroxide at physiological pH. Comparative reactivity studies on the cleavage of bis(4-nitrophenyl)phosphate (BNPP) mediated by the two dizinc complexes have revealed that the system with the larger Zn...Zn separation is hydrolytically more potent, both in the hydrolysis and the transesterification of BNPP. The extent of active site inhibition by the reaction products has also been found to be governed by the Zn...Zn distance, since phosphate diester coordination in a bridging mode within the clamp of two zinc ions is only favored for Zn...Zn distances well above 4 A. Different binding affinities are rationalized in terms of the structural characteristics of the product-inhibited complexes for the two different ligand scaffolds, with dimethyl phosphate found as a bridging ligand within the bimetallic pocket.

Correlation of structure and function in oligonuclear zinc(II) model phosphatases.

A series of pyrazolate-based dizinc(II) complexes has been synthesized and investigated as functional models for phosphoesterases, focusing on correlations between hydrolytic activity and molecular parameters of the bimetallic core. The Zn...Zn distance, the (bridging or nonbridging) position of the Zn-bound hydroxide nucleophile, and individual metal ion coordination numbers are controlled by the topology of the compartmental ligand scaffold. Species distributions of the various dizinc complexes in solution have been determined potentiometrically, and structures in the solid state have been elucidated by X-ray crystallography. The hydrolysis of bis(p-nitrophenyl)phosphate (BNPP) promoted by the dinuclear phosphoesterase model complexes has been investigated in DMSO/buffered water (1:1) at 50 degrees C as a function of complex concentration, substrate concentration, and pH. Coordination of the phosphodiester has been followed by ESI mass spectrometry, and bidentate binding could be verified crystallographically in two cases. Drastic differences in hydrolytic activity are observed and can be attributed to molecular properties. A significant decrease of the pK(a) of zinc-bound water is observed if the resulting hydroxide is involved in a strongly hydrogen-bonded intramolecular O(2)H(3) bridge, which can be even more pronounced than for a bridging hydroxide. Irrespective of the pK(a) of the Zn-bound water, a hydroxide in a bridging position evidently is a relatively poor nucleophile, while a nonbridging hydroxide position is more favorable for hydrolytic activity. Additionally, the metal array has to provide a sufficient number of coordination sites for activating both the substrate and the nucleophile, where phosphate diesters such as BNPP preferentially bind in a bidentate fashion, requiring a third site for water binding. Product inhibition of the active site by the liberated (p-nitrophenyl)phosphate is observed, and the product-inhibited complex could be characterized crystallographically. In that complex, the phosphate monoester is found to cap a rectangular array of four zinc ions composed of two bimetallic entities.